aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2019-07-25media: v4l2-core: Cleanup MakefileEzequiel Garcia1-7/+3
Use the videodev-$(CONFIG_FOO) syntax to simplify the Makefile. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Don't default-enable "ancillary driver autoselect" if EMBEDDEDEzequiel Garcia1-1/+1
Admittedly, it's not easy to say what CONFIG_EMBEDDED really should be doing, just as it's not easy to say what is "embedded". In any case, the very description of MEDIA_SUBDRV_AUTOSELECT specifies that embedded systems usually don't want to enable this autoselect option. Therefore, drop the default-yes, when the CONFIG_EMBEDDED is chosen. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Always setup controls when opening video deviceNiklas Söderlund1-15/+15
Now that both Gen2 (video device centric) and Gen3 (media device centric) modes of the driver have controls it is required to always setup the controls when opening the devices. Remove the check which only calls v4l2_ctrl_handler_setup() for Gen2 and call it unconditionally. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Add support for RGB formats with alpha componentNiklas Söderlund2-0/+43
The R-Car VIN module supports V4L2_PIX_FMT_ARGB555 and V4L2_PIX_FMT_ABGR32 pixel formats. Add the hardware register setup and allow the alpha component to be changed while streaming using the V4L2_CID_ALPHA_COMPONENT control. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix checkpatch warning for macro VNDMR_A8BIT] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Add control for alpha componentNiklas Söderlund3-2/+61
In preparation to adding support for RGB pixel formats with an alpha component add a control to allow the user to control which alpha value should be used. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Rename VNDMR_DTMD_ARGB1555 to VNDMR_DTMD_ARGBNiklas Söderlund1-2/+2
The value have nothing to do with ARGB1555, it controls if the alpha component should be filled in for ARGB1555 or ARGB888. Rename it to reflect this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-dev: fix WARN_ON(!vdev->device_caps)Hans Verkuil1-2/+2
Device nodes of type VFL_TYPE_SUBDEV have a 0 device_caps, so they trigger this warning. Add a check against VFL_TYPE_SUBDEV. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 3c1350501c21 ("media: v4l2-dev/ioctl: require non-zero device_caps, verify sane querycap results") Reported-by: Jan Kotas <jank@cadence.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ipu3-cio2: Parse information from firmware without using callbacksSakari Ailus1-43/+50
Instead of using the convenience function v4l2_async_notifier_parse_fwnode_endpoints(), parse the endpoints and set up the async sub-devices without using callbacks. While this adds a little bit of code, it makes parsing the endpoints quite a bit more simple and gives more control to the driver over the process. The parsing assumes D-PHY instead of letting the V4L2 fwnode framework guess it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ipu3-cio2: Proceed with notifier init even if there are no subdevsSakari Ailus1-5/+5
The notifier may be registered even if there are no subdevs. Do that to simplify the code. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ipu3-cio2: Clean up notifier's subdev list if parsing endpoints failsSakari Ailus1-2/+6
The notifier must be cleaned up whenever parsing endpoints fails. Do that to avoid a memory leak in that case. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-async: Safely clean up an uninitialised notifierSakari Ailus1-1/+1
Make the V4L2 async framework a bit more robust by allowing to clean up an uninitialised notifier. Otherwise the result would be a (close to) NULL pointer dereference. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: omap3isp: Rework OF endpoint parsingSakari Ailus1-134/+197
Rework OF endpoint parsing for the omap3isp driver. This does add some lines of code. The benefits are still clear: - the great complication related to callbacks in endpoint parsing is gone; instead endpoints are obtained port by port and - endpoints may now have a default bus configuration which was not possible while using callbacks. This driver does not benefit from that feature, but as the omap3isp is one of the exemplary drivers, this works as an example for driver developers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-async: Add v4l2_async_notifier_add_fwnode_remote_subdevSakari Ailus1-0/+23
v4l2_async_notifier_add_fwnode_remote_subdev is a convenience function for parsing information on V4L2 fwnode subdevs. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-async: Get fwnode reference when putting it to the notifier's listSakari Ailus6-30/+18
The v4l2_async_notifier_add_fwnode_subdev() did not take a reference of the added fwnode, relying on the caller to handle that instead, in essence putting the fwnode to be added if there was an error. As the reference is eventually released during the notifier cleanup, this is not intuitive nor logical. Improve this by always getting a reference when the function succeeds, and the caller releasing the reference when it does not *itself* need it anymore. Luckily, perhaps, there were just a handful of callers using the function. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: davinci-vpif: Don't dereference endpoint after putting it, fix refcountingSakari Ailus1-3/+2
The davinci-vpif driver dereferences its local endpoints after releasing the reference to them. The driver also puts its endpoints explicitly while the of_graph_get_next_endpoint() does that, too, leading to obtaining a reference once and releasing it twice. Both are fixed by this patch. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-fwnode: Switch to use fwnode_property_count_uXX()Andy Shevchenko1-5/+3
Use fwnode_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: pci: Use dev_get_drvdata where possibleChuhong Yuan3-10/+5
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov2680: fix a typo in a function nameChristophe JAILLET1-2/+2
All functions in this file starts with 'ov2680_', except ov2860_parse_dt(). This is likely a typo. rename it to 'ov2680_parse_dt()' (6 and 8) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Add support for Cadence CSI2TX 2.1Jan Kotas1-29/+111
This patch adds support for CSI2TX v2.1 version of the controller. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Fix Lane mapping in Cadence CSI2TXJan Kotas1-2/+2
This patch fixes mapping of lanes in DPHY_CFG register of the controller. In the register, bit 0 means first data lane. In Linux we currently assume lane 0 is clock. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Add lane checks for Cadence CSI2TXJan Kotas1-2/+11
This patch adds lane checks for CSI2TX, to prevent clock lane being used as a data lane. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: i2c: ov5640: Fix the order for enabling regulatorsFabio Estevam1-1/+1
According to the OV5640 datasheet the following sequence needs to be followed when powering the OV5640 supplies: - DOVDD - AVDD - DVDD So follow this order inside the ov5640_supply_name[] array, so that the regulator_bulk() functions can enable the regulator in the correct sequence. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: i2c: ov5640: Check for devm_gpiod_get_optional() errorFabio Estevam1-0/+5
The power down and reset GPIO are optional, but the return value from devm_gpiod_get_optional() needs to be checked and propagated in the case of error, so that probe deferral can work. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov5645: Use regulator_bulk() functionsFabio Estevam1-73/+21
The code can be simplified by using the regulator_bulk() functions, so switch to it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov5645: Remove unneeded regulator_set_voltage()Fabio Estevam1-28/+0
There is no need to call regulator_set_voltage() for each regulator that powers the camera. The voltage value for each regulator should be retrieved from the device tree, so remove the unneeded regulator_set_voltage(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: vivid: fix typo: use -> userHans Verkuil1-2/+2
Fix typo in two comments. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: vivid: fix device init when no_error_inj=1 and fb disabledGuillaume Tucker1-1/+1
Add an extra condition to add the video output control class when the device has some hdmi outputs defined. This is required to then always be able to add the display present control, which is enabled when there are some hdmi outputs. This fixes the corner case where no_error_inj is enabled and the device has no frame buffer but some hdmi outputs, as otherwise the video output control class would be added anyway. Without this fix, the sanity checks fail in v4l2_ctrl_new() as name is NULL. Fixes: c533435ffb91 ("media: vivid: add display present control") Cc: stable@vger.kernel.org # for 5.3 Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: am437x: remove unused struct vpfe_pixel_formatHans Verkuil1-6/+0
struct vpfe_pixel_format was defined, but never used. Remove it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: davinci/vpfe_capture.c: drop unused format descriptionsHans Verkuil1-42/+9
Simplify vpfe_pixel_format to just contain the pixelformat and bpp fields. All others are unused. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: sh_veu: convert to struct v4l2_fhHans Verkuil1-0/+5
This driver didn't use struct v4l2_fh, so add it. This is a very basic conversion. I can't test this on real hardware, so I didn't dare to also convert the driver to start using the v4l2-mem2mem ioctl/fop helpers. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-dev/ioctl: require non-zero device_caps, verify sane querycap resultsHans Verkuil2-6/+14
Now that all V4L2 drivers set device_caps in struct video_device, we can add a check for this to ensure all future drivers fill this in. Also verify that when the querycap ioctl is called the driver didn't mess with the device_caps value and that capabilities is a superset of device_caps. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> [hverkuil-cisco@xs4all.nl: fix too-long line] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: marvell-ccic: mmp: add MODULE_DEVICE_TABLELubomir Rintel1-0/+1
This fixes autoloading the module by the OF compatible string. Fixes: 83c40e6611ec ("media: marvell-ccic/mmp: add devicetree support") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l: ctrls: Add debug messagesEzequiel Garcia4-37/+117
Currently, the v4l2 control code is a bit silent on errors. Add debug messages on (hopefully) most of the error paths. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: hdpvr: Add device num check and handlingLuke Nowakowski-Krijger1-1/+11
Add hdpvr device num check and error handling We need to increment the device count atomically before we checkout a device to make sure that we do not reach the max count, otherwise we get out-of-bounds errors as reported by syzbot. Reported-and-tested-by: syzbot+aac8d0d7205f112045d2@syzkaller.appspotmail.com Signed-off-by: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Centralize black listing of pixel formatsNiklas Söderlund3-13/+16
Instead of scattering black listing of pixel formats who are not supported on particular platforms move it to a central location. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Clean up correct notifier in error pathNiklas Söderlund1-1/+1
The parallel input initialization error path cleans up the wrong async notifier, fix this by cleaning up the correct notifier. Fixes: 9863bc8695bc36e3 ("media: rcar-vin: Cleanup notifier in error path") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: vimc: stream: format comments as kernel-docAndré Almeida1-14/+24
Format the current existing comments as kernel-doc comments, to be reused at kernel documention. Add opening marks (/**) and return values. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: vimc: stream: fix style of argument descriptionAndré Almeida1-4/+6
As in "Function parameters" at doc-guide/kernel-doc.rst, "the continuation of the description should start at the same column as the previous line". Make the @producer_pixfmt comply with that. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: vimc: stream: remove obsolete function docAndré Almeida1-8/+0
As a more complete version of vimc_streamer_s_streamer comment was added at "media: vimc: stream: add missing function documentation" commit in .c file, remove the old documentation from .h file. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: mx2_emmaprp: use struct v4l2_fhHans Verkuil1-100/+32
Convert this driver to use struct v4l2_fh and as a result switch to using vb2/v4l2_mem2mem helper functions as well. Only compile-tested due to lack of hardware. This driver is however very similar to the m2m-deinterlace driver in this respect, and that v4l2_fh conversion has been properly tested. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: omap_vout: use struct v4l2_fhHans Verkuil1-26/+27
This driver is one of the few that is still not using struct v4l2_fh. Convert it. Tested on a Pandaboard. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: m2m-deinterlace: use struct v4l2_fhHans Verkuil1-88/+36
Convert this driver to use struct v4l2_fh and as a result switch to using vb2/v4l2_mem2mem helper functions as well. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: media/i2c: don't return ENOTTY if SUBDEV_API is not setHans Verkuil6-19/+7
If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not stored. So return 0 instead of -ENOTTY. Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL instead of -ENOTTY, after all the get_fmt functionality is still present, just not supported for TRY. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: vb2-dc: skip CPU sync in map/unmap dma_bufLucas Stach1-7/+16
This is rougly equivalent to ca0e68e21aae (drm/prime: skip CPU sync in map/unmap dma_buf). The contig memory allocated is already device coherent memory, so there is no point in doing a CPU sync when mapping it to another device. Also most importers currently cache the mapping so the CPU sync would only happen on the first import, so we are better off with not pretending to do a cache synchronization at all. This gets rid of a lot of CPU overhead in uses where those dma-bufs are regularily imported and detached again, like Weston is currently doing in the DRM compositor. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix checkpatch warnings] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: saa7134: remove redundant assignment to variable valueColin Ian King1-1/+0
The variable value is being assigned with a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: ti-vpe: fix leaked of_node referencesWen Yang1-0/+1
The call to of_get_parent returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/ti-vpe/cal.c:1621:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1607, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: exynos4-is: fix leaked of_node referencesWen Yang2-0/+3
The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/exynos4-is/fimc-is.c:813:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/fimc-is.c:870:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/fimc-is.c:885:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:545:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 541, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:528:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:534:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: vivid: work around high stack usage with clangArnd Bergmann1-3/+4
Building a KASAN-enabled kernel with clang ends up in a case where too much is inlined into vivid_thread_vid_cap() and the stack usage grows a lot, possibly when the register allocation fails to produce efficient code and spills a lot of temporaries to the stack. This uses more than twice the amount of stack than the sum of the individual functions when they are not inlined: drivers/media/platform/vivid/vivid-kthread-cap.c:766:12: error: stack frame size of 2208 bytes in function 'vivid_thread_vid_cap' [-Werror,-Wframe-larger-than=] Marking two of the key functions in here as 'noinline_for_stack' avoids the pathological case in clang without any apparent downside for gcc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: cobalt: Prefer pcie_capability_read_word()Frederick Lawler1-23/+15
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: via-camera: fix v4l2-compliance failsHans Verkuil1-18/+26
The patch fixes various v4l2-compliance failures: - missing support for control events - support of s/g_std even though this doesn't apply to a webcam - missing colorspace reporting - bus_info wasn't filled in by VIDIOC_QUERYCAP - parm.capture.readbuffers was overridden with wrong value - viacam_enum_framesizes/intervals didn't check the arguments Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.