aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2018-03-22media: ngene: avoid unused variable warningArnd Bergmann1-1/+1
The newly added pdev variable is only used in an #ifdef, causing a build warning without CONFIG_PCI_MSI, unless we move the declaration inside the same #ifdef: drivers/media/pci/ngene/ngene-core.c: In function 'ngene_start': drivers/media/pci/ngene/ngene-core.c:1328:17: error: unused variable 'pdev' [-Werror=unused-variable] Fixes: 6795bf626482 ("media: ngene: convert kernellog printing from printk() to dev_*() macros") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: v4l: omap_vout: vrfb: remove an unused variableArnd Bergmann1-1/+0
We now get a warning after the 'dmadev' variable is no longer used: drivers/media/platform/omap/omap_vout_vrfb.c: In function 'omap_vout_prepare_vrfb': drivers/media/platform/omap/omap_vout_vrfb.c:239:21: error: unused variable 'dmadev' [-Werror=unused-variable] Fixes: 8f0aa38292f2 ("media: v4l: omap_vout: vrfb: Use the wrapper for prep_interleaved_dma()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: ttpci: improve printing of encoded MAC addressDaniel Scheller1-6/+3
When loading the budget_av driver for ie. a KNC1 DVB-C TDA10024 card, which makes use of the ttpci eeprom check functionality (that always fails on these cards, but that's no issue at all), this is printed to the kernel log: [ 10.497333] saa7146 (0): dma buffer size 192512 [ 10.497335] dvbdev: DVB: registering new adapter (KNC1 DVB-C TDA10024) [ 10.545007] adapter failed MAC signature check [ 10.545009] encoded MAC from EEPROM was [ 10.545010] ff: [ 10.545011] ff: [ 10.545011] ff: ... [ 10.545021] ff [ 10.832422] budget_av: KNC1-4: MAC addr = 00:09:d6:6d:b3:be with the 'ff' being repeated for a total of 20 times. Improve that by using the %*phC format specifier instead dprintk()'ing every byte of the encoded MAC separately. This obsoletes the int i, and the kernel log looks cleaner: [ 3234.383153] saa7146 (0): dma buffer size 192512 [ 3234.383154] dvbdev: DVB: registering new adapter (KNC1 DVB-C TDA10024) [ 3234.428745] adapter failed MAC signature check [ 3234.428747] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 3234.728194] budget_av: KNC1-0: MAC addr = 00:09:d6:6d:b3:be Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: mt9t112: Remove soc_camera dependenciesJacopo Mondi4-214/+203
Remove soc_camera framework dependencies from mt9t112 sensor driver. - Handle clk, gpios and power routines - Register async subdev - Remove deprecated g/s_mbus_config operations - Remove driver flags - Change driver interface and add kernel doc - Adjust build system - Fix code style issues reported by checkpatch in strict mode This commit does not remove the original soc_camera based driver as long as other platforms depends on soc_camera framework. As I don't have access to a working camera module, this change has only been compile tested. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: Copy mt9t112 soc_camera sensor driverJacopo Mondi1-0/+1163
Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. No modification to KConfig and Makefile as soc_camera framework dependencies need to be removed first in next commit. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: correct some coding style issuesAntti Palosaari1-84/+88
Correct coding style issues reported mostly by checkpatch.pl. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: convert to regmap apiAntti Palosaari3-97/+115
Use regmap for chip register access. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: dvb-usb-v2: add probe/disconnect callbacksAntti Palosaari2-4/+24
Add probe and disconnect callbacks that behaves similarly than ones used commonly on Linux driver model. We need those to get early / late access to driver in order to use normal probe time stuff, like regmap, extra bus adapters and so. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: enhance streaming configAntti Palosaari2-119/+115
Replace static stream settings by one which enables and disables stream interface when needed (TS streaming control). 1) Configure both TS IF and USB endpoints according to current use case 2) Disable streaming USB endpoints when streaming is stopped and enable when streaming is started. Reduces sleep power consumption slightly. 3) Reduce USB buffersize slightly, from 130848 to 98136 bytes Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: refactor copy firmware to slave demodAntti Palosaari1-44/+44
Small improvements. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: refactor firmware downloadAntti Palosaari1-22/+17
Small revise, no functional changes. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: use af9013 demod pid filtersAntti Palosaari1-31/+18
PID filters are moved to af9013 demod driver as those are property of demod. As pid filters are now implemented correctly by demod driver, we could enable pid filter support for possible slave demod too on dual tuner configuration. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: add pid filter supportAntti Palosaari2-0/+57
af9013 demod has pid filter. Add support for it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: remove all legacy media attach releated stuffAntti Palosaari2-115/+7
No one is binding that driver through media attach so remove it and all related dead code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: attach demod using i2c bindingAntti Palosaari2-66/+96
af9013 demod driver has i2c binding. Use it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: add i2c mux adapter for tuner busAntti Palosaari4-19/+111
Add muxed i2c adapter for demod tuner i2c bus gate control. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: convert inittabs suitable for regmap_update_bitsAntti Palosaari2-768/+782
Convert inttabs to format (reg, mask, val) which are suitable parameters to pass directly for regmap_update_bits. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: fix loggingAntti Palosaari1-79/+81
Pass correct device to dev_* logging functions, which allows us to remove redundant KBUILD_MODNAME and __func__ parameters from log format. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: wrap dvbv3 statistics via dvbv5Antti Palosaari2-352/+22
Driver has calculated dvbv5 statistics, so use those as a base for legacy dvbv3 statistics. Wrap and convert needed values to dvbv3, remove old dvbv3 statistic implementations. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: dvbv5 ber and perAntti Palosaari1-1/+72
Implement dvbv5 ber and per. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: dvbv5 cnrAntti Palosaari2-5/+84
Implement dvbv5 cnr. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: dvbv5 signal strengthAntti Palosaari1-2/+81
Implement dvbv5 signal strength estimate. We know tuner dependent -80dBm and -50dBm agc values, construct line equation and use it to map agc value to signal strength estimate. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: change lock detection slightlyAntti Palosaari1-28/+27
Whilst rewritten largely, the basic logic remains same with one exception: do not return immediately on success case. We are going to add statistics that function and cannot return too early. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: mceusb: pid 0x0609 vid 0x031d does not under report carrier cyclesSean Young1-1/+7
This mceusb does not need the carrier count quirk, with it set it reports the carrier higher than it is. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: mceusb: add IR learning support features (IR carrier frequency measurement and wide-band/short-range receiver)A Sun1-12/+140
Windows Media Center IR transceivers include two IR receivers; wide-band/short-range and narrow-band/long-range. The short-range (5cm distance) receiver is for IR learning and has IR carrier frequency measuring ability. Add mceusb driver support to select the short range IR receiver and enable pass through of its IR carrier frequency measurements. RC and LIRC already support these mceusb driver additions. Test platform: Linux raspberrypi 4.9.59-v7+ #1047 SMP Sun Oct 29 12:19:23 GMT 2017 armv7l GNU/Linux mceusb 1-1.2:1.0: Registered Pinnacle Systems PCTV Remote USB with mce emulator interface version 1 mceusb 1-1.2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active) Sony TV remote control ir-ctl from v4l-utils pi@raspberrypi:~ $ ir-ctl -V IR raw version 1.12.3 pi@raspberrypi:~ $ ir-ctl -m -r ... pulse 650 space 550 pulse 650 space 600 pulse 600 space 600 pulse 1200 space 600 pulse 650 space 550 pulse 650 space 600 pulse 600 space 600 pulse 550 carrier 40004 space 16777215 ^C pi@raspberrypi:~ $ exit Signed-off-by: A Sun <as1033x@comcast.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: meson-ir: lower timeout and make configurableSean Young1-1/+3
A timeout of 200ms is much longer than necessary, and delays the decoding decoding of a single scancode and the last scancode when a button is being held. This makes the remote seem sluggish. If the min_timeout and max_timeout values are set, the timeout is configurable via the LIRC_SET_REC_TIMEOUT ioctl. Tested-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: meson-ir: add timeout on idleSean Young2-5/+28
Meson doesn't seem to be able to generate timeout events in hardware. So install a software timer to generate the timeout events required by the decoders to prevent "ghost keypresses". Reported-by: Matthias Reichl <hias@horus.com> Tested-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: cpia2_usb: drop bogus interface-release callJohan Hovold1-3/+0
Drop bogus call to usb_driver_release_interface() from the disconnect() callback. As the interface is already being unbound at this point, usb_driver_release_interface() simply returns early. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: adv7604: Add support for i2c_new_secondary_deviceJean-Michel Hautbois1-22/+40
The ADV7604 has thirteen 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Allow a device tree node to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. [Kieran: Re-adapted for mainline] Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: adv748x: Add support for i2c_new_secondary_deviceKieran Bingham2-55/+36
The ADV748x has twelve 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Allow a device tree node to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: adv748x: Add missing CBUS pageKieran Bingham2-0/+5
The ADV748x has 12 pages mapped onto I2C addresses. In the existing implementation only 11 are mapped correctly in the page enumerations, which causes an off-by-one fault on pages above the infoframe definition due to a missing 'CBUS' page. This causes the address for the CEC, SDP, TXA, and TXB to be incorrectly programmed during the iterations in adv748x_initialise_clients(). Until now this has gone un-noticed due to the fact that following the creation of the clients - the device is reset and the addresses are reprogrammed in manually by the call to "adv748x_write_regs(state, adv748x_set_slave_address);" As part of moving to dynamic i2c address allocations repair this by providing the missing CBUS page definition. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: adv748x: Simplify regmap configurationKieran Bingham1-89/+20
The ADV748x has identical map configurations for each register map. The duplication of each map can be simplified using a helper macro such that each map is represented on a single line. Define ADV748X_REGMAP_CONF for this purpose use it to create the tables. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: add tuner standby op, use where neededHans Verkuil12-66/+24
The v4l2_subdev core s_power op was used for two different things: power on/off sensors or video decoders/encoders and to put a tuner in standby (and only the tuner!). There is no 'tuner wakeup' op, that's done automatically when the tuner is accessed. The danger with calling (s_power, 0) to put a tuner into standby is that it is usually broadcast for all subdevs. So a video receiver subdev that supports s_power will also be powered off, and since there is no corresponding (s_power, 1) they will never be powered on again. In addition, this is specifically meant for tuners only since they draw the most current. This patch adds a new tuner op called 'standby' and replaces all calls to (core, s_power, 0) by (tuner, standby). This prevents confusion between the two uses of s_power. Note that there is no overlap: bridge drivers either just want to put the tuner into standby, or they deal with powering on/off sensors. Never both. This also makes it easier to replace s_power for the remaining bridge drivers with some PM code later. Whether we want something cleaner for tuners in the future is a separate topic. There is a lot of legacy code surrounding tuners, and I am very hesitant about making changes there. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: radio: Critical interrupt bugfix for si470x over i2cDouglas Fischer2-2/+8
Fixed si470x_start() disabling the interrupt signal, causing tune operations to never complete. This does not affect USB radios because they poll the registers instead of using the IRQ line. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> [hans.verkuil@cisco.com: fixed 80 column checkpatch warning] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: radio: Critical v4l2 registration bugfix for si470x over i2cDouglas Fischer1-4/+28
Added the call to v4l2_device_register() required to add a new radio device. Without this patch, it is impossible for the driver to load. This does not affect USB devices. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: radio: Tuning bugfix for si470x over i2cDouglas Fischer1-0/+9
Fixed si470x_set_channel() trying to tune before chip is turned on, which causes warnings in dmesg and when probing, makes driver wait for 3s for tuning timeout. This issue did not affect USB devices because they have a different probing sequence. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> [hans.verkuil@cisco.com: fixed space-after-( checkpatch warning] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: stm32-dcmi: add JPEG supportHugues Fruchet1-47/+146
Add DCMI JPEG support. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: stm32-dcmi: fix unnecessary parenthesesHugues Fruchet1-6/+6
Fix unnecessary parentheses in if conditions. Detected by checkpatch.pl --strict. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: stm32-dcmi: rework overrun/error caseHugues Fruchet1-18/+11
Do not stop/restart dma on overrun or errors. Dma will be restarted on current frame transfer completion. Frame transfer completion is ensured even if overrun or error occurs by DCMI continuous capture mode which restarts data transfer at next frame sync. Do no warn on overrun while in irq thread, this slows down system and lead to more overrun errors. Use a counter instead and log errors at stop streaming. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: stm32-dcmi: fix lock schemeHugues Fruchet1-33/+24
Fix lock scheme leading to spurious freeze. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: v4l: common: Remove v4l2_find_nearest_formatSakari Ailus1-26/+0
v4l2_find_nearest_format is not useful for drivers in finding the best matching format as it assumes a V4L2 specific struct. Drivers will use v4l2_find_nearest_size instead. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: vivid: Use v4l2_find_nearest_sizeSakari Ailus1-3/+2
Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: ov5670: Use v4l2_find_nearest_sizeSakari Ailus1-31/+2
Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: ov13858: Use v4l2_find_nearest_sizeSakari Ailus1-34/+2
Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: v4l: common: Add a function to obtain best size from a listSakari Ailus1-0/+30
Add a function (as well as a helper macro) to obtain the best size in a list of device specific sizes. This helps writing drivers as well as aligns interface behaviour across drivers. The struct in which this information is contained in is typically specific to the driver, therefore the existing function v4l2_find_nearest_format() does not address the need. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: imon: rename protocol from other to imonSean Young1-14/+23
This renames the protocol for the imon rc driver from other to imon, since it is now an known protocol. Although different name will show up in the sysfs protocol file, loading a keymap using existing ir-keytable versions still works. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: add new imon protocol decoder and encoderSean Young6-2/+213
This makes it possible to use the various iMON remotes with any raw IR RC device. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: oops in ir_timer_keyup after device unplugSean Young1-3/+3
If there is IR in the raw kfifo when ir_raw_event_unregister() is called, then kthread_stop() causes ir_raw_event_thread to be scheduled, decode some scancodes and re-arm timer_keyup. The timer_keyup then fires when the rc device is long gone. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: new driver for early iMon deviceSean Young3-0/+212
These devices were supported by the lirc_imon.c driver which was removed from staging in commit f41003a23a02 ("[media] staging: lirc_imon: port remaining usb ids to imon and remove"). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: add keymap for iMON RSC remoteSean Young2-0/+82
Note that the stick on the remote is not supported yet. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.