aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2018-02-26media: usbtv: prevent double free in error caseOliver Neukum1-0/+2
Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu> Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: media-device: use strlcpy() instead of strncpy()Xiongfeng Wang1-1/+1
gcc-8 reports drivers/media/media-device.c: In function 'media_device_get_topology': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 64 equals destination size [-Wstringop-truncation] We need to use strlcpy() to make sure the dest string is nul-terminated. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: coda: bump maximum number of internal framebuffers to 19Philipp Zabel1-1/+1
While the h.264 standard only allows up to 16 reference frames, the CODA firmware needs two more buffers: one to hold the currently decoded frame and one for the display frame. Adding the framebuffer needed by the driver for VDOA operation brings the total to a maximum of 19 internal framebuffers. Lift the current maximum of 17 internal framebuffers to allow playback of high profile streams that require more than 14 reference frames. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: au0828: fix VIDEO_V4L2 dependencyArnd Bergmann1-2/+3
After the move of videobuf2 into the common directory, selecting the au0828 driver with CONFIG_V4L2 disabled started causing a link failure, as we now attempt to build videobuf2 but it still requires v4l2: ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! We want to be able to build the core au0828 support without V4L2, so this makes the 'select' conditional on V4L2, and refines the dependencies in VIDEO_AU0828_V4L2 so it can only be enabled in the exact conditions that have VIDEOBUF2_VMALLOC reachable. Fixes: 03fbdb2fc2b8 ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a3693 ("[media] media: au0828 - convert to use videobuf2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: atmel-isc: Make local symbol fmt_configs_list staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/media/platform/atmel/atmel-isc.c:338:19: warning: symbol 'fmt_configs_list' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: coda: Add i.MX51 (CodaHx4) supportPhilipp Zabel3-16/+75
Add support for the CodaHx4 VPU used on i.MX51. Decoding h.264, MPEG-4, and MPEG-2 video works, as well as encoding h.264. MPEG-4 encoding is not enabled, it currently produces visual artifacts. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix (bogus) sparse warning about uninited me_bits] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: platform: stm32: Adopt SPDX identifierBenjamin Gaignard2-5/+2
Add SPDX identifiers to files under stm32 directory Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: Don't let tvp5150_get_vbi() go out of vbi_ram_default arrayMauro Carvalho Chehab1-43/+45
As pointed by Dan, possible values for bits[3:0] of te Line Mode Registers can range from 0x0 to 0xf, but the check logic allow values ranging from 0x0 to 0xe. As static arrays are initialized with zero, using a value without an explicit initializer at the array won't cause any harm. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dvb: update buffer mmaped flags and frame counterMauro Carvalho Chehab7-69/+124
Now that we have support for a buffer counter and for error flags, update them at DMX_DQBUF. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dmxdev: Fix the logic that enables DMA mmap supportMauro Carvalho Chehab1-33/+42
Some conditions required for DVB mmap support to work are reversed. Also, the logic is not too clear. So, improve the logic, making it easier to be handled. PS.: I'm pretty sure that I fixed it while testing, but, somehow, the change got lost. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dmxdev: fix error code for invalid ioctlsMauro Carvalho Chehab1-1/+1
Returning -EINVAL when an ioctl is not implemented is a very bad idea, as it is hard to distinguish from other error contitions that an ioctl could lead. Replace it by its right error code: -ENOTTY. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: m88ds3103: don't call a non-initalized functionMauro Carvalho Chehab1-2/+5
If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: au0828: add VIDEO_V4L2 dependencyArnd Bergmann1-1/+1
After the move of videobuf2 into the common directory, selecting the au0828 driver with CONFIG_V4L2 disabled started causing a link failure, as we now attempt to build videobuf2 but it still requires v4l2: ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! This adds the same dependency in au0828 that the other users of videobuf2 have. Fixes: 03fbdb2fc2b8 ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a3693 ("[media] media: au0828 - convert to use videobuf2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dvb: fix DVB_MMAP dependencyArnd Bergmann1-0/+2
Enabling CONFIG_DVB_MMAP without CONFIG_VIDEOBUF2_VMALLOC results in a link error: drivers/media/dvb-core/dvb_vb2.o: In function `_stop_streaming': dvb_vb2.c:(.text+0x894): undefined reference to `vb2_buffer_done' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_init': dvb_vb2.c:(.text+0xbec): undefined reference to `vb2_vmalloc_memops' dvb_vb2.c:(.text+0xc4c): undefined reference to `vb2_core_queue_init' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_release': dvb_vb2.c:(.text+0xe14): undefined reference to `vb2_core_queue_release' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_stream_on': dvb_vb2.c:(.text+0xeb8): undefined reference to `vb2_core_streamon' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_stream_off': dvb_vb2.c:(.text+0xfe8): undefined reference to `vb2_core_streamoff' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_fill_buffer': dvb_vb2.c:(.text+0x13ec): undefined reference to `vb2_plane_vaddr' dvb_vb2.c:(.text+0x149c): undefined reference to `vb2_buffer_done' This adds a 'select' statement for it, plus a dependency that ensures that videobuf2 in turn works, as it in turn depends on VIDEO_V4L2 to link, and that must not be a module if videobuf2 is built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dvb: fix DVB_MMAP symbol nameArnd Bergmann2-16/+16
CONFIG_DVB_MMAP was misspelled either as CONFIG_DVB_MMSP or DVB_MMAP, so it had no effect at all. This fixes that, to make it possible to build it again. Fixes: 4021053ed52d ("media: dvb-core: make DVB mmap API optional") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: videobuf2: fix build issues with vb2-traceMauro Carvalho Chehab3-2/+4
There was a trouble with vb2-trace: instead of being part of VB2 core, it was stored at V4L2 videodev. That was wrong, as it doesn't actually belong to V4L2 core. Now that vb2 is not part of v4l2-core, its trace functions should be moved altogether. So, move it to its rightful place: at videobuf2-core. That fixes those errors: drivers/media/common/videobuf2/videobuf2-core.o: In function `__read_once_size': ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x10): undefined reference to `__tracepoint_vb2_buf_queue' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x28): undefined reference to `__tracepoint_vb2_buf_done' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x40): undefined reference to `__tracepoint_vb2_qbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x58): undefined reference to `__tracepoint_vb2_dqbuf' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 partSakari Ailus3-1/+6
Videobuf2 is now separate from V4L2 and can be now built without it, at least in principle --- enabling videobuf2 in kernel configuration attempts to compile videobuf2-v4l2.c but that will fail if CONFIG_VIDEO_V4L2 isn't enabled. Solve this by adding a separate Kconfig option for videobuf2-v4l2 and make it a separate module as well. This means that drivers now need to choose both the appropriate videobuf2 memory type (VIDEOBUF2_{VMALLOC,DMA_CONTIG,DMA_SG}) and VIDEOBUF2_V4L2 if they need both. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23ov13858: fix endiannes warningsMauro Carvalho Chehab1-5/+8
3 warning regressions: + drivers/media/i2c/ov13858.c: warning: cast to restricted __be32: => 1093:16 + drivers/media/i2c/ov13858.c: warning: incorrect type in assignment (different base types): => 1111:13 + drivers/media/i2c/ov13858.c: warning: incorrect type in initializer (different base types): => 1071:27 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov5640: fix framerate updateHugues Fruchet1-0/+2
After a framerate update through s_frame_interval(), the new framerate was not taken into account when streaming, but was taken into account on next session. This was due to sensor->current_mode not updated accordingly to new framerate setting in ov5640_s_frame_interval(). Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov5640: fix virtual_channel parameter permissionsHugues Fruchet1-2/+7
Fix module_param(virtual_channel) permissions. This problem was detected by checkpatch: $ scripts/checkpatch.pl -f drivers/media/i2c/ov5640.c ERROR: Use 4 digit octal (0777) not decimal permissions +module_param(virtual_channel, int, 0); Also add an error trace in case of virtual_channel not in the valid range of values. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov5640: various typo & style fixesHugues Fruchet1-18/+18
Various typo & style fixes either detected by code review or checkpatch. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov5640: add error trace in case of i2c read failureHugues Fruchet1-2/+5
Add an error trace in ov5640_read_reg() in case of i2c_transfer() failure. Uniformize error traces using dev_err instead v4l2_err. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov5640: add JPEG supportHugues Fruchet1-2/+43
Add YUV422 encoded JPEG support. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: v4l2: i2c: ov7670: Implement OF mbus configurationJacopo Mondi2-14/+85
ov7670 driver supports two optional properties supplied through platform data, but currently does not support any standard video interface property. Add support through OF parsing for 2 generic properties (vsync and hsync polarities) and for one custom property already supported through platform data to suppress pixel clock output during horizontal blanking. While at there, check return value of register writes in set_fmt function and rationalize spacings. Signal polarities and pixel clock blanking verified through scope and image capture. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: i2c: ov9650: fix potential integer overflow in __ov965x_set_frame_intervalGustavo A. R. Silva1-2/+2
Cast fi->interval.numerator to u64 in order to avoid a potential integer overflow. This variable is being used in a context that expects an expression of type u64. Addresses-Coverity-ID: 1324146 ("Unintentional integer overflow") [Sakari Ailus: use do_div() to make this work on 32-bit systems] Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov9650: support device tree probingAkinobu Mita1-38/+92
The ov9650 driver currently only supports legacy platform data probe. This change adds device tree probing. There has been an attempt to add device tree support for ov9650 driver by Hugues Fruchet as a part of the patchset that adds support of OV9655 camera (http://www.spinics.net/lists/linux-media/msg117903.html), but it wasn't merged into mainline because creating a separate driver for OV9655 is preferred. This is very similar to Hugues's patch, but not supporting new device. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Hugues Fruchet <hugues.fruchet@st.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Rob Herring <robh@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov13858: Use false for boolean valueGustavo A. R. Silva1-1/+1
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov13858: Avoid possible null first frameChiranjeevi Rapolu1-0/+4
Previously, the sensor, with default settings, was outputting SOF without data. This results in frame sync error on the receiver side. Now, configure the sensor to output SOF with MIPI data for all frames. This avoids possible null first frame on the bus. Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov2685: Assign ret in default case in s_ctrl callbackSakari Ailus1-0/+1
Assign ret in the default case for s_ctrl callback. This can't happen but still may result in compiler warnings. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov2685: add support for OV2685 sensorShunqian Zheng3-0/+858
This patch adds driver for Omnivision's ov2685 sensor. Though the ov2685 can output yuv data, this driver only supports the raw bayer format, including the following features: - output 1600x1200 at 30fps - test patterns - manual exposure/gain control - vblank and hblank - media controller - runtime pm [Sakari Ailus: trivial: ov5695_of_match -> ov2685_of_match] Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov5695: add support for OV5695 sensorShunqian Zheng3-0/+1411
This patch adds driver for Omnivision's ov5695 sensor, the driver supports following features: - supported resolutions + 2592x1944 at 30fps + 1920x1080 at 30fps + 1296x972 at 60fps + 1280x720 at 30fps + 640x480 at 120fps - test patterns - manual exposure/gain(analog and digital) control - vblank and hblank - media controller - runtime pm Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: mt9t031: deprecate, move to stagingHans Verkuil3-865/+0
This driver is unused and depends on the deprecated soc-camera framework. Move it to staging in preparation for being removed unless someone does the work to convert it to a proper V4L2 subdev driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: imx074: deprecate, move to stagingHans Verkuil3-504/+0
This driver is unused and depends on the deprecated soc-camera framework. Move it to staging in preparation for being removed unless someone does the work to convert it to a proper V4L2 subdev driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: intel-ipu3: cio2: Use SPDX license headersYong Zhi2-22/+4
Adopt SPDX license headers for ipu3 cio2 driver. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: intel-ipu3: cio2: Disable and sync irq before stream offYong Zhi1-0/+4
This is to avoid pending interrupts to be handled during stream off, in which case, the ready buffer will be removed from buffer list, thus not all buffers can be returned to VB2 as expected. Disable CIO2 irq at cio2_hw_exit() so no new interrupts are generated. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: uvcvideo: Fixed ktime_t to ns conversionJasmin Jessich1-2/+3
Commit 828ee8c71950 ("media: uvcvideo: Use ktime_t for timestamps") changed to use ktime_t for timestamps. Older Kernels use a struct for ktime_t, which requires the conversion function ktime_to_ns to be used on some places. With this patch it will compile now also for older Kernel versions. Signed-off-by: Jasmin Jessich <jasmin@anw.at> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: uvcvideo: Use parentheses around sizeof operandLaurent Pinchart4-36/+37
While the sizeof is an operator and not a function, the preferred coding style in the kernel is to enclose its operand in parentheses. To avoid mixing multiple coding styles in the driver, use parentheses around all sizeof operands. While at it replace a kmalloc() with a kmalloc_array() to silence a checkpatch warning triggered by this patch. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: uvcvideo: Use internal kernel integer typesLaurent Pinchart7-193/+193
Replace the __[su]{8,16,32} variant of integer types with the non-underscored types as the code is internal to the driver, not exposed to userspace. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: uvcvideo: Use kernel integer typesLaurent Pinchart3-11/+11
Replace the uint_{8,16,32} types with the corresponding native kernel types u{8,16,32}. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: uvcvideo: Drop extern keyword in function declarationsLaurent Pinchart1-72/+68
The extern keyword isn't needed to declare functions in header files. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: uvcvideo: Support multiple frame descriptors with the same dimensionsPhilipp Zabel1-16/+55
The Microsoft HoloLens Sensors device has two separate frame descriptors with the same dimensions, each with a single different frame interval: VideoStreaming Interface Descriptor: bLength 30 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 1 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 481 dwMinBitRate 147763200 dwMaxBitRate 147763200 dwMaxVideoFrameBufferSize 615680 dwDefaultFrameInterval 333333 bFrameIntervalType 1 dwFrameInterval( 0) 333333 VideoStreaming Interface Descriptor: bLength 30 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 2 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 481 dwMinBitRate 443289600 dwMaxBitRate 443289600 dwMaxVideoFrameBufferSize 615680 dwDefaultFrameInterval 111111 bFrameIntervalType 1 dwFrameInterval( 0) 111111 Skip duplicate dimensions in enum_framesizes, let enum_frameintervals list the intervals from both frame descriptors. Change set_streamparm to switch to the correct frame index when changing the interval. This enables 90 fps capture on a Lenovo Explorer Windows Mixed Reality headset. [laurent.pinchart@ideasonboard.com: Renamed tmp_ival to ival] Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: uvcvideo: Apply flags from device to actual propertiesEdgar Thier1-13/+39
Use flags the device exposes for UVC controls. This allows the device to define which property flags are set. Since some cameras offer auto-adjustments for properties (e.g. auto-gain), the values of other properties (e.g. gain) can change in the camera. Examining the flags ensures that the driver is aware of such properties. Signed-off-by: Edgar Thier <info@edgarthier.net> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22tda1997x: get rid of an unused varMauro Carvalho Chehab1-2/+2
1 warning regressions: + drivers/media/i2c/tda1997x.c: warning: variable 'last_irq_status' set but not used [-Wunused-but-set-variable]: => 1421:17 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: i2c: Add TDA1997x HDMI receiver driverTim Harvey4-0/+3471
Add support for the TDA1997x HDMI receivers. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix type 'testin' -> 'testing'] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: v4l-ioctl: fix clearing pad for VIDIOC_DV_TIMINGS_CAPTim Harvey1-1/+1
The pad field was inadvertently cleared. Fix this. It's needed for subdevs. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: make a proper commit message] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: v4l2-dv-timings: add v4l2_hdmi_colorimetry()Hans Verkuil1-0/+141
Add the v4l2_hdmi_colorimetry() function so we have a single function that determines the colorspace, YCbCr encoding, quantization range and transfer function from the InfoFrame data. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: convert g/s_parm to g/s_frame_interval in subdevsHans Verkuil13-165/+110
Convert all g/s_parm calls to g/s_frame_interval. This allows us to remove the g/s_parm ops since those are a duplicate of g/s_frame_interval. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: v4l2-common: create v4l2_g/s_parm_cap helpersHans Verkuil1-0/+48
Create helpers to handle VIDIOC_G/S_PARM by querying the g/s_frame_interval v4l2_subdev ops. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: v4l2-subdev: clear reserved fieldsHans Verkuil1-0/+13
Clear the reserved fields for these ioctls according to the specification: VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL VIDIOC_SUBDEV_ENUM_FRAME_SIZE VIDIOC_SUBDEV_ENUM_MBUS_CODE VIDIOC_SUBDEV_G_CROP, VIDIOC_SUBDEV_S_CROP VIDIOC_SUBDEV_G_FMT, VIDIOC_SUBDEV_S_FMT VIDIOC_SUBDEV_G_FRAME_INTERVAL, VIDIOC_SUBDEV_S_FRAME_INTERVAL VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION Found with v4l2-compliance. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-15[poll] annotate SAA6588_CMD_POLL usersAl Viro3-6/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.