aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2017-08-27media: usbvision: Adjust eight checks for null pointersMarkus Elfring1-8/+8
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usbvision: Delete an error message for a failed memory allocation in usbvision_probe()Markus Elfring1-1/+0
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: radio: make video_device constBhumika Goyal4-4/+4
Make these const as they are only used in a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib8000: remove some bogus dead codeDan Carpenter2-19/+0
This function is broken. It sets the wrong front_end to NULL. But it's not used, so let's just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib9000: delete some unused broken codeDan Carpenter2-25/+0
The dib9000_remove_slave_frontend() function isn't used. I was reviewing it because my static checker claims it writes one element beyond the end of the array. That's a false positive. What it actually does is, if there are two or more front ends, then it prints a debug message to say that it removed the first one, stored in state->fe[1], and then it "removes" (scare quotes on purpose) the second one, stored in state->fe[2]. Deleting a front end from the middle is not really supported and breaks code like dib9000_release() which assumes the first NULL front end marks the end of the list. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usbtv: make v4l2_file_operations constBhumika Goyal1-1/+1
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: cx18: make v4l2_file_operations constBhumika Goyal1-1/+1
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usb: make video_device constBhumika Goyal11-11/+11
Make these const as they are only used during a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: pci: make video_device constBhumika Goyal7-7/+7
Make these const as they are either used during a copy operation or passed to a const argument of the function cx88_vdev_init. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: platform: make video_device constBhumika Goyal9-9/+9
Make these const as they are only used during a copy operation. Done using Coccinelle: @match disable optional_qualifier@ identifier s; @@ static struct video_device s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression list[3] es; position ref.p; @@ cx88_vdev_init(es,&s@p,...) @good2@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1 && !good2@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct video_device s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: au0828: fix RC_CORE dependencyArnd Bergmann1-0/+1
When RC_CORE is a loadable module, and au0828 is built-in including the RC support, we get a link error: drivers/media/usb/au0828/au0828-input.o: In function `au0828_get_key_au8522': au0828-input.c:(.text+0x474): undefined reference to `ir_raw_event_store' drivers/media/usb/au0828/au0828-input.o: In function `au0828_rc_register': au0828-input.c:(.text+0x7c8): undefined reference to `rc_allocate_device' au0828-input.c:(.text+0x8f8): undefined reference to `rc_register_device' This adds an additional dependency, similar to the one for em28xx, to ensure the broken configuration is never used. Fixes: 2fcfd317f66c ("[media] au0828: add support for IR on HVR-950Q") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib0090: fix duplicated code for different branchesGustavo A. R. Silva1-8/+1
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Addresses-Coverity-ID: 1226795 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mx2_emmaprp: Check for platform_get_irq() errorFabio Estevam1-0/+2
platform_get_irq() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0367: remove QAM_AUTO from ddb_fe_opsDaniel Scheller1-1/+1
Since the cab_* codepath doesn't recognize QAM_AUTO, don't announce that it is supported when it really isn't. Fixes ie. w_scan from unconditionally using QAM_AUTO on DVB-C scans. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mxl111sf: Fix potential null pointer dereferenceEugeniu Rosca1-1/+3
Reviewing the delta between cppcheck output of v4.9.39 and v4.9.40 stable updates, I stumbled on the new warning: mxl111sf.c:80: (warning) Possible null pointer dereference: rbuf Since copying state->rcvbuf into rbuf is not needed in the 'write-only' scenario (i.e. calling mxl111sf_ctrl_msg() from mxl111sf_i2c_send_data() or from mxl111sf_write_reg()), bypass memcpy() in this case. Fixes: d90b336f3f65 ("[media] mxl111sf: Fix driver to use heap allocate buffers for USB messages") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: au0828: fix unbalanced lock/unlock in au0828_usb_probeGustavo A. R. Silva1-0/+2
Call mutex_unlock and free dev on failure. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-usb: Add memory free on error path in dw2102_probe()Anton Vasilyev1-17/+22
If dw2102_probe() fails on dvb_usb_device_init(), then memleak occurs. The patch adds deallocation to the error path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Reviewed-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0910: change minsymrate to 100Ksyms/sDaniel Scheller1-1/+1
The demodulator supports symbol rates as low as 100Ksyms/s - the demod setup in start() already handles such low symbol rates and reviewers of stv0910 equipped cards even found and tested transponders with SRs in that range. So, announce this in the fe_ops. Cc: Ralph Metzler <rjkm@metzlerbros.de> Cc: Richard Scobie <r.scobie@clear.net.nz> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: ddbridge: fix sparse warningsDaniel Scheller2-19/+19
Fix several drivers/media/pci/ddbridge/ddbridge-core.c: warning: symbol ... was not declared. Should it be static? drivers/media/pci/ddbridge/ddbridge-core.c: warning: Using plain integer as NULL pointer drivers/media/pci/ddbridge/ddbridge-io.h: warning: cast removes address space of expression drivers/media/pci/ddbridge/ddbridge-io.h: warning: incorrect type in argument 1 (different address spaces) at multiple places. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: ddbridge: fix teardown/deregistration order in ddb_input_detach()Daniel Scheller1-5/+6
Brought to attention by Matthias Schwarzott <zzam@gentoo.org> by fixing possible use-after-free faults in some demod drivers: In ddb_input_detach(), the i2c_client is unregistered and removed before dvb frontends are unregistered and detached. While no use-after-free issue was observed so far, there is another issue with this: dvb->attached keeps track of the state of the input/output registration, and the i2c_client unregistration takes place only if everything was successful (dvb->attached == 0x31). If for some reason an error occurred during the frontend setup, that value stays at 0x20. In the following error handling and cleanup, ddb_input_detach() will skip down to that state, leaving the i2c_client registered, causing refcount issues. Fix this by moving the i2c_client deregistration down to case 0x20. Cc: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0910: release lock on gate_ctrl() failureDaniel Scheller1-5/+20
Whenever write_reg() fails to open/close the demod's I2C gate, release the lock to avoid deadlocking situations. If I2c gate open failed, there's no need to hold a lock, and if close fails, the mutex_unlock() at the end of the function is never reached, leaving the mutex_lock in locked state, which in turn will cause potential for deadlocks. Thus, release the lock on failure. While we're touching gate_ctrl(), add some explanation about the need for locking and the shared I2C bus/gate. Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: cx231xx: fix use-after-free when unregistering the i2c_client for the dvb demodMatthias Schwarzott1-3/+3
Calling i2c_unregister_device for a demod driver destroys the frontend object. Later it is accessed by calling dvb_unregister_frontend and dvb_frontend_detach. In some cases this leads to a general protection fault with this callstack: dvb_unregister_frontend+0x25/0x50 [dvb_core] dvb_fini+0xdb/0x160 [cx231xx_dvb] cx231xx_unregister_extension+0x3d/0xb0 [cx231xx] cx231xx_dvb_unregister+0x10/0x809 [cx231xx_dvb] SyS_delete_module+0x18a/0x240 ? exit_to_usermode_loop+0x7b/0x80 entry_SYSCALL_64_fastpath+0x17/0x98 Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: cx23885: Fix use-after-free when unregistering the i2c_client for the dvb demodMatthias Schwarzott1-5/+5
Unregistering the i2c_client of the demod driver destroys the frontend object. Calling vb2_dvb_unregister_bus later accesses the frontend (and with the refcount_t) conversion the refcount_t code complains: kernel: ------------[ cut here ]------------ kernel: WARNING: CPU: 0 PID: 7883 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80 kernel: refcount_t: underflow; use-after-free. kernel: Modules linked in: bluetooth si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O-) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) ums_realtek videobuf2_core(O) uas videodev(O) media(O) rtl8192cu i2c_mux usb_storage rtl_usb rtl8192c_common rtlwifi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core x86_pkg_temp_thermal kvm_intel kvm irqbypass kernel: CPU: 0 PID: 7883 Comm: rmmod Tainted: G W O 4.11.3-gentoo #3 kernel: Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014 kernel: Call Trace: kernel: dump_stack+0x4d/0x66 kernel: __warn+0xc6/0xe0 kernel: warn_slowpath_fmt+0x46/0x50 kernel: ? kobject_put+0x2f/0x60 kernel: refcount_sub_and_test+0x70/0x80 kernel: refcount_dec_and_test+0x11/0x20 kernel: dvb_unregister_frontend+0x42/0x60 [dvb_core] kernel: vb2_dvb_dealloc_frontends+0x9e/0x100 [videobuf2_dvb] kernel: vb2_dvb_unregister_bus+0xd/0x20 [videobuf2_dvb] kernel: cx23885_dvb_unregister+0xc3/0x110 [cx23885] kernel: cx23885_dev_unregister+0xea/0x150 [cx23885] kernel: cx23885_finidev+0x4f/0x70 [cx23885] kernel: pci_device_remove+0x34/0xb0 kernel: device_release_driver_internal+0x150/0x200 kernel: driver_detach+0x33/0x70 kernel: bus_remove_driver+0x47/0xa0 kernel: driver_unregister+0x27/0x50 kernel: pci_unregister_driver+0x34/0x90 kernel: cx23885_fini+0x10/0x12 [cx23885] kernel: SyS_delete_module+0x166/0x220 kernel: ? exit_to_usermode_loop+0x7b/0x80 kernel: entry_SYSCALL_64_fastpath+0x17/0x98 kernel: RIP: 0033:0x7f5901680b07 kernel: RSP: 002b:00007ffdf6cdb028 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 kernel: RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f5901680b07 kernel: RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000000001500258 kernel: RBP: 00000000015001f0 R08: 0000000000000000 R09: 1999999999999999 kernel: R10: 0000000000000884 R11: 0000000000000206 R12: 00007ffdf6cda010 kernel: R13: 0000000000000000 R14: 00000000015001f0 R15: 00000000014ff010 kernel: ---[ end trace c3a4659b89086061 ]--- Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: v4l2-flash-led-class: Create separate sub-devices for indicatorsSakari Ailus1-46/+67
The V4L2 flash interface allows controlling multiple LEDs through a single sub-devices if, and only if, these LEDs are of different types. This approach scales badly for flash controllers that drive multiple flash LEDs or for LED specific associations. Essentially, the original assumption of a LED driver chip that drives a single flash LED and an indicator LED is no longer valid. Address the matter by registering one sub-device per LED. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (for greybus/light) Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: smiapp: check memory allocation failureChristophe JAILLET1-0/+2
Check memory allocation failure and return -ENOMEM in such a case. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: omap3isp: fix uninitialized variable useArnd Bergmann1-1/+1
A debug printk statement was copied incorrectly into the new csi1 parser code and causes a warning there: drivers/media/platform/omap3isp/isp.c: In function 'isp_probe': include/linux/dynamic_debug.h:134:3: error: 'i' may be used uninitialized in this function [-Werror=maybe-uninitialized] Since there is only one lane, the index is never set. This changes the debug print to always print a zero instead, keeping the original format of the message. Fixes: 9211434bad30 ("media: omap3isp: Parse CSI1 configuration from the device tree") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: qcom: don't go past the arrayMauro Carvalho Chehab1-1/+1
As reported by smatch: drivers/media/platform/qcom/camss-8x16/camss-vfe.c:1136 vfe_release_wm() error: buffer overflow 'vfe->wm_output_map' 7 <= 7 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: qcom: mark long long consts as suchMauro Carvalho Chehab1-2/+2
Fix those warnings when building on i386: drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:333:22: warning: constant 1000000000000 is so big it is long long drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:339:32: warning: constant 1000000000000 is so big it is long long Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Add abbreviations explanationTodor Tomov6-6/+6
Add abbreviations explanation at the top header blocks in source files. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Use optimal clock frequency ratesTodor Tomov10-106/+544
Use standard V4L2 control to get pixel clock rate from a sensor linked in the media controller pipeline. Then calculate clock rates on CSIPHY, CSID and VFE to use the lowest possible. If the currnet pixel clock rate of the sensor cannot be read then use the highest possible. This case covers also the CSID test generator usage. If VFE is already powered on by another pipeline, check that the current VFE clock rate is high enough for the new pipeline. If not return busy error code as VFE clock rate cannot be changed while VFE is running. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: vfe: Configure crop module in VFETodor Tomov1-1/+40
Add crop module configuration support to be able to apply cropping. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: vfe: Add interface for croppingTodor Tomov2-42/+150
Extend selection ioctls to handle cropping configuration. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: vfe: Configure scaler module in VFETodor Tomov1-13/+46
Add scaler module configuration support to be able to apply scaling. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: vfe: Add interface for scalingTodor Tomov2-2/+183
Add compose selection ioctls to handle scaling configuration. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: vfe: Support for frame paddingTodor Tomov3-31/+109
Add support for horizontal and vertical frame padding. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: vfe: Format conversion support using PIX interfaceTodor Tomov5-155/+877
Use VFE PIX input interface and do format conversion in VFE. Supported input format is UYVY (single plane YUV 4:2:2) and its different sample order variations. Supported output formats are: - NV12/NV21 (two plane YUV 4:2:0) - NV16/NV61 (two plane YUV 4:2:2) Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Enable buildingTodor Tomov3-0/+20
Add Makefile and update platform/Kconfig and platform/Makefile to enable building of the QCom CAMSS driver. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camms: Add core filesTodor Tomov2-0/+796
These files implement the platform driver code. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Add files which handle the video device nodesTodor Tomov2-0/+745
These files handle the video device nodes of the camss driver. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Add VFE filesTodor Tomov2-0/+2020
These files control the VFE module. The VFE has different input interfaces. The PIX input interface feeds the input data to an image processing pipeline. Three RDI input interfaces bypass the image processing pipeline. The VFE also contains the AXI bus interface which writes the output data to memory. RDI interfaces are supported in this version. PIX interface is not supported. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Add ISPIF filesTodor Tomov2-0/+1249
These files control the ISPIF module which handles the routing of the data streams from the CSIDs to the inputs of the VFE. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Add CSID filesTodor Tomov2-0/+1085
These files control the CSID modules which handle the protocol and application layer of the CSI2 receivers. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: camss: Add CSIPHY filesTodor Tomov2-0/+900
These files control the CSIPHY modules which are responsible for the physical layer of the CSI2 receivers. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: v4l: Add packed Bayer raw12 pixel formatsSakari Ailus1-4/+8
These formats are compressed 12-bit raw bayer formats with four different pixel orders. They are similar to 10-bit variants. The formats added by this patch are V4L2_PIX_FMT_SBGGR12P V4L2_PIX_FMT_SGBRG12P V4L2_PIX_FMT_SGRBG12P V4L2_PIX_FMT_SRGGB12P Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: fix copy/paste error in return_buf_errorGustavo A. R. Silva1-1/+1
Call function v4l2_m2m_dst_buf_remove_by_buf() instead of v4l2_m2m_src_buf_remove_by_buf() Addresses-Coverity-ID: 1415317 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Cc: <stable@vger.kernel.org> # for v4.13 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: em28xx: calculate left volume level correctlyColin Ian King1-1/+1
The calculation of the left volume looks suspect, the value of 0x1f - ((val << 8) & 0x1f) is always 0x1f. The debug prior to the assignment of value[1] prints the left volume setting using the calculation 0x1f - (val >> 8) & 0x1f which looks correct to me. Fix the left volume by using the correct expression as used in the debug. Detected by CoverityScan, CID#146140 ("Wrong operator used") Fixes: 850d24a5a861 ("[media] em28xx-alsa: add mixer support for AC97 volume controls") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: platform: constify videobuf_queue_ops structuresArvind Yadav2-2/+2
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: pci: constify videobuf_queue_ops structuresArvind Yadav1-1/+1
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: saa7146: constify videobuf_queue_ops structuresArvind Yadav2-2/+2
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: cx18: Make i2c_algo_bit_data constBhumika Goyal1-1/+1
Make this const as it is only used in a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.