aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2017-07-19media: smiapp: make various const arrays staticColin Ian King1-4/+4
Don't populate const arrays on the stack but instead make them static. Makes the object code smaller and saves nearly 550 bytes. Before: text data bss dec hex filename 3638 752 0 4390 1126 smiapp-quirk.o After: text data bss dec hex filename 2802 1040 0 3842 f02 smiapp-quirk.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: ov5645: Add control to export CSI2 link frequencyTodor Tomov1-4/+26
Add suport for standard integer menu V4L2_CID_LINK_FREQ control. The CSI2 link frequency value is specific for each sensor mode so the sensor mode structure is extended to add this. The control is made read-only and its value is updated when the sensor mode is changed - on set_format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: ov5645: Add control to export pixel clock frequencyTodor Tomov1-5/+21
Add suport for standard V4L2_CID_PIXEL_RATE control. The pixel clock frequency value is specific for each sensor mode so the sensor mode structure is extended to add this. The control is read-only and its value is updated when the sensor mode is changed - on set_format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: ov5645: Set media entity functionTodor Tomov1-0/+1
Set media entity function to MEDIA_ENT_F_CAM_SENSOR. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: omap3isp: Ignore endpoints with invalid configurationSakari Ailus1-3/+5
If endpoint has an invalid configuration, ignore it instead of happily proceeding to use it nonetheless. Ignoring such an endpoint is better than failing since there could be multiple endpoints, only some of which are bad. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: omap3isp: Return -EPROBE_DEFER if the required regulators can't be obtainedPavel Machek2-1/+7
If regulator returns -EPROBE_DEFER, we need to return it too, so that omap3isp will be re-probed when regulator is ready. Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: omap3isp: add CSI1 supportPavel Machek2-7/+13
CSI-2 PHY power management is only needed for major version 15 of the ISP. Additionally, set the CCP2 PHY for previous ISP versions as well. These changes are necessary for CCP2 support. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: omap3isp: Explicitly set the number of CSI-2 lanes used in lane cfgSakari Ailus3-6/+18
The omap3isp driver extracts the CSI-2 lane configuration from the V4L2 fwnode endpoint but misses the number of lanes itself. Get this information and use it in PHY configuration. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: omap3isp: Destroy CSI-2 phy mutexes in error and module removalSakari Ailus3-2/+11
The CSI-2 phy driver did initialise mutexes in its init function but there was no corresponding cleanup function destroying them. Fix that. Also clean up ISP module initialisation a little. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: omap3isp: Check for valid port in endpointsSakari Ailus1-1/+1
Check that we do have a valid port in an endpoint, return an error if not. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: smiapp: add CCP2 supportPavel Machek1-4/+10
Add support for CCP2 connected SMIA sensors as found on the Nokia N900. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: v4l: Add support for CSI-1 and CCP2 bussesSakari Ailus3-10/+52
CCP2 and CSI-1, are older single data lane serial busses. [mchehab@s-opensource.com: don't use spaces for identation] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: v4l: fwnode: Obtain data bus type from FWSakari Ailus1-0/+11
Just obtain it. It'll actually get used soon with CSI-1/CCP2. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: v4l: fwnode: Call CSI2 bus csi2, not csiSakari Ailus1-3/+3
The function to parse CSI2 bus parameters was called v4l2_fwnode_endpoint_parse_csi_bus(), rename it as v4l2_fwnode_endpoint_parse_csi2_bus() in anticipation of CSI1/CCP2 support. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: wake up capture queue on encoder stop after output streamoffPhilipp Zabel1-1/+1
If an encoder stop command is issued after the output queue has already stopped streaming, the qsequence counter has been reset to 0. Always wake up the capture queue if the output queue is not streaming. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: mark CODA960 firmware versions 2.3.10 and 3.1.1 as supportedPhilipp Zabel1-0/+2
Firmware versions 2.3.10 revision 40778 and 3.1.1 revision 46072 are contained in the i.MX firmware download archives provided by NXP at http://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-3.5.7-1.0.0.bin and http://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-5.4.bin, respectively. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: set MPEG-4 encoder class registerPhilipp Zabel2-0/+5
Explicitly set MPEG-4 encoder class register instead of relying on the default value of 0. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: align internal mpeg4 framebuffers to 16x16 macroblocksPhilipp Zabel1-1/+2
This fixes visual artifacts in the first macroblock row of encoded MPEG-4 video output caused by 8 additional lines of luma data leaking into the chroma planes of the internal reference framebuffers: the buffer size is rounded up to a multiple of 16x16 macroblock size, same as for the h.264 encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: set field of destination buffersPhilipp Zabel1-0/+2
Set the field of destination buffers properly. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: extend GOP size rangePhilipp Zabel2-3/+6
CodaDx6 only accepts GOP sizes up to 60 frames, but CODA960 can handle up to 99 frames. If we disable automatic I frame generation altogether by setting GOP size to 0, we can let an application produce arbitrarily large I frame intervals using the V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME control. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: do not reassign ctx->tiled_map_type in coda_s_fmtPhilipp Zabel1-2/+3
This smatch warning: coda/coda-common.c:706 coda_s_fmt() warn: missing break? reassigning 'ctx->tiled_map_type' can be silenced by moving the ctx->tiled_map_type assignment into the breakout condition. That way the field is not reassigned when falling through to the next switch statement. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: add h264 and mpeg4 profile and level controlsPhilipp Zabel1-0/+47
CODA7541 supports H.264 BP level 3/3.1 and MPEG-4 SP level 5/6. CODA960 supports H.264 BP level 4.0 and MPEG-4 SP level 5/6. Implement the necessary profile and level controls to let userspace know this. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: davinci: vpif_capture: fix potential NULL derefKevin Hilman1-3/+5
Fix potential NULL pointer dereference in the error path of memory allocation failure. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: fc001[23]: make const gain table arrays staticColin Ian King2-2/+2
Don't populate the gain tables on the stack but make them static const. Makes the object code smaller: Before: text data bss dec hex filename 7801 1408 0 9209 23f9 drivers/media/tuners/fc0012.o 8483 936 0 9419 24cb drivers/media/tuners/fc0013.o After: text data bss dec hex filename 7696 1464 0 9160 23c8 drivers/media/tuners/fc0012.o 8362 1024 0 9386 24aa drivers/media/tuners/fc0013.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: solo6x10: make const array saa7128_regs_ntsc staticColin Ian King1-1/+1
Don't populate const array saa7128_regs_ntsc on the stack but insteaed make it static. Makes the object code smaller and saves nearly 840 bytes Before: text data bss dec hex filename 9218 360 0 9578 256a solo6x10-tw28.o After: text data bss dec hex filename 8237 504 0 8741 2225 solo6x10-tw28.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Andrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: Ismael Luceno <ismael@iodev.co.uk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: platform: video-mux: fix Kconfig dependencyArnd Bergmann1-1/+1
When CONFIG_V4L2 is built as a loadable module, the new video mux driver fails to link as built-in code: drivers/media/platform/video-mux.o: In function `video_mux_remove': video-mux.c:(.text+0x24): undefined reference to `v4l2_async_unregister_subdev' drivers/media/platform/video-mux.o: In function `video_mux_probe': video-mux.c:(.text+0x800): undefined reference to `v4l2_subdev_init' video-mux.c:(.text+0xa10): undefined reference to `v4l2_async_register_subdev' This makes it use the same Kconfig dependency as all the other users of the VIDEO_V4L2_SUBDEV_API symbol. Fixes: 68803ad4522f ("[media] platform: add video-multiplexer subdevice driver") Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: mediatek: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: mtk-mdp: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: davinci: vpif_capture: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: davinci: vpif_display: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: atmel-isc: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: rcar_fdp1: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: pxa_camera: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: st-delta: constify vb2_ops structuresGustavo A. R. Silva1-2/+2
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: stm32-dcmi: constify vb2_ops structureGustavo A. R. Silva1-1/+1
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: tuners: remove unnecessary static in simple_dvb_configure()Gustavo A. R. Silva1-1/+1
Remove unnecessary static on local variable t_params. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the code size. This issue was detected using Coccinelle and the following semantic patch: @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; In the following log you can see the difference in the code size. Also, there is a significant difference in the bss segment. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 23314 3640 832 27786 6c8a drivers/media/tuners/tuner-simple.o after: text data bss dec hex filename 23257 3552 768 27577 6bb9 drivers/media/tuners/tuner-simple.o Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: media/i2c/saa717x: fix spelling mistake: "implementd" -> "implemented"Colin Ian King1-1/+1
Trivial fix to spelling mistake in v4l2_dbg debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: i2c: m5mols: fix spelling mistake: "Machanics" -> "Mechanics"Colin Ian King1-1/+1
Trivial fix to spelling mistake in v4l2_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: vb2 dma-sg: Constify dma_buf_ops structuresArvind Yadav1-1/+1
dma_buf_ops are not supposed to change at runtime. All functions working with dma_buf_ops provided by <linux/dma-buf.h> work with const dma_buf_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 5238 112 4 5354 14ea drivers/media/v4l2-core/videobuf2-dma-sg.o File size After adding 'const': text data bss dec hex filename 5358 0 4 5362 14f2 drivers/media/v4l2-core/videobuf2-dma-sg.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: vb2 vmalloc: Constify dma_buf_ops structuresArvind Yadav1-1/+1
dma_buf_ops are not supposed to change at runtime. All functions working with dma_buf_ops provided by <linux/dma-buf.h> work with const dma_buf_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 3171 192 0 3363 d23 drivers/media/v4l2-core/videobuf2-vmalloc.o File size After adding 'const': text data bss dec hex filename 3291 80 0 3371 d2b drivers/media/v4l2-core/videobuf2-vmalloc.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: vb2 dma-contig: Constify dma_buf_ops structuresArvind Yadav1-1/+1
dma_buf_ops are not supposed to change at runtime. All functions working with dma_buf_ops provided by <linux/dma-buf.h> work with const dma_buf_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 6035 272 0 6307 18a3 drivers/media/v4l2-core/videobuf2-dma-contig.o File size After adding 'const': text data bss dec hex filename 6155 160 0 6315 18ab drivers/media/v4l2-core/videobuf2-dma-contig.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: cx23885: add const to v4l2_file_operations structureBhumika Goyal1-1/+1
Declare v4l2_file_operations structure as const as it is only stored in the fops field of video_device structure. This field is of type const, so declare v4l2_file_operations structures with similar properties as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: media/platform: add const to v4l2_file_operations structuresBhumika Goyal5-5/+5
Declare v4l2_file_operations structures as const as they are only stored in the fops field of video_device structures. This field is of type const, so declare v4l2_file_operations structures with similar properties as const. Cross compiled bfin_capture.o for blackfin arch. vpbe_display.o file did not cross compile for arm. Could not find any architecture matching the configuraion symbol for fsl-viu.c file. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: pulse8-cec/rainshadow-cec: make adapter name uniqueHans Verkuil2-2/+2
The CEC adapter name used by the pulse8-cec and rainshadow-cec USB device drivers was a fixed string, but it should be unique if you connect multiple of these devices to the same computer. Use dev_name(&serio->dev) instead, which make it unique again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec: drop senseless messageHans Verkuil1-4/+1
Especially the '0.10' version number is confusing since CEC_ADAP_G_CAPS returns a completely different version number. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec: be smarter about detecting the number of attempts madeHans Verkuil1-2/+7
Some hardware does more than one attempt. So when it calls cec_transmit_done when an error occurred it will e.g. use an error count of 2 instead of 1. The framework always assumed a single attempt, but now it is smarter and will sum the counters to detect how many attempts were made. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec-pin: add low-level pin hardware supportHans Verkuil4-0/+811
Add support for CEC hardware that relies on low-level pin polling or GPIO interrupts. One example is the Allwinner SoC. But any GPIO-based CEC implementation can use this as well. A GPIO implementation is very suitable as well for debugging: it can use interrupts to detect state changes and report it. Userspace can then verify if the bus traffic is correct. This also makes error injection possible. The disadvantage is that it is hard to get the timings right since linux isn't a hard realtime system. In general on an idle system it works quite well, but under load the timer will miss its mark every so often. The debugfs file /sys/kernel/debug/cec/cecX/status gives some statistics with respect to the timer overruns. When the adapter is unconfigured and the low-level driver supports interrupts, then the interrupt will be used to detect changes. This should be quite accurate. But when the adapter is configured a hrtimer has to be used. The hrtimer implements a state machine where for each state the code will read the bus or drive the bus and go on to the next state. It will re-arm the timer with a delay based on the next state. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec: add core support for low-level CEC pin monitoringHans Verkuil2-2/+29
Add support for the new MONITOR_PIN mode. Add the cec_pin_event function that the CEC pin code will call to queue pin change events. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec: rework the cec event handlingHans Verkuil2-64/+110
Event handling was always fairly simplistic since there were only two events. With the addition of pin events this needed to be redesigned. The state_change and lost_msgs events are now core events with the guarantee that the last state is always available. The new pin events are a queue of events (up to 64 for each event) and the oldest event will be dropped if the application cannot keep up. Lost events are marked with a new event flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: cec: add adap_free opHans Verkuil1-0/+2
This is needed for CEC adapters that allocate resources that have to be freed before the cec_adapter is deleted. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.