aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2017-04-17[media] b2c2: constify nxt200x_config structureBhumika Goyal1-1/+1
Declare nxt200x_config structure as const as it is only passed as an argument to the function dvb_attach. dvb_attach calls its first argument on the rest of its arguments. The first argument of dvb_attach in the changed case is nxt200x_attach and the parameter of this function to which the object reference is passed is of type const. So, nxt200x_config structures having this property can be made const. File size before: text data bss dec hex filename 7566 568 0 8134 1fc6 common/b2c2/flexcop-fe-tuner.o File size after: text data bss dec hex filename 7582 536 0 8118 1fb6 common/b2c2/flexcop-fe-tuner.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-17[media] dvb-usb-dibusb-mc-common: Add MODULE_LICENSEBen Hutchings1-0/+2
dvb-usb-dibusb-mc-common is licensed under GPLv2, and if we don't say so then it won't even load since it needs a GPL-only symbol. Fixes: e91455a1495a ("[media] dvb-usb: split out common parts of dibusb") Reported-by: Dominique Dumont <dod@debian.org> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-17[media] drivers/media: Convert remaining use of pr_warning to pr_warnJoe Perches1-2/+2
To enable eventual removal of pr_warning This makes pr_warn use consistent for drivers/media Prior to this patch, there was 1 use of pr_warning and 310 uses of pr_warn in drivers/media Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] vimc: Virtual Media Controller core, capture and sensorHelen Koike10-0/+1657
First version of the Virtual Media Controller. Add a simple version of the core of the driver, the capture and sensor nodes in the topology, generating a grey image in a hardcoded format. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix small typo in Kconfig] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] media: i2c: Add support for OV5647 sensorRamiro Oliveira3-0/+646
The OV5647 sensor from Omnivision supports up to 2592x1944 @ 15 fps, RAW 8 and RAW 10 output formats, and MIPI CSI-2 interface. The driver adds support for 640x480 RAW 8. Signed-off-by: Ramiro Oliveira <roliveir@synopsys.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] media: Add a driver for the ov5645 camera sensorTodor Tomov3-0/+1358
The ov5645 sensor from Omnivision supports up to 2592x1944 and CSI2 interface. The driver adds support for the following modes: - 1280x960 - 1920x1080 - 2592x1944 Output format is packed 8bit UYVY. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] vsp1: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for histogram controlsHans Verkuil1-0/+2
The two histogram controls will modify the layout of the metadata, so this flag should be set. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l2-ctrls.c: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for ROTATEHans Verkuil1-0/+4
The rotate control will modify the layout by definition. Always set this flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: vsp1: Add HGT supportNiklas Söderlund10-5/+343
The HGT is a Histogram Generator Two-Dimensions. It computes a weighted frequency histograms for hue and saturation areas over a configurable region of the image with optional subsampling. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: Define a pixel format for the R-Car VSP1 2-D histogram engineNiklas Söderlund1-0/+1
The format is used on the R-Car VSP1 video queues that carry 2-D histogram statistics data. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: vsp1: Add HGO supportLaurent Pinchart10-13/+367
The HGO is a Histogram Generator One-Dimension. It computes per-channel histograms over a configurable region of the image with optional subsampling. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: Define a pixel format for the R-Car VSP1 1-D histogram engineLaurent Pinchart1-0/+1
The format is used on the R-Car VSP1 video queues that carry 1-D histogram statistics data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: vsp1: Fix HGO and HGT routing register addressesLaurent Pinchart1-2/+2
The addresses are incorrect, fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: vsp1: Support histogram generators in pipeline configurationLaurent Pinchart6-28/+134
Histogram generators are single-pad entities that branch as leaf nodes at any point in the pipeline. Make sure that pipeline traversal and routing configuration support them correctly. Support for the actual HGO and HGT operation will come later. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: vsp1: Add histogram supportLaurent Pinchart4-0/+732
The histogram common code will be used to implement support for both the HGO and HGT histogram computation engines. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: Add metadata buffer type and formatLaurent Pinchart4-6/+66
The metadata buffer type is used to transfer metadata between userspace and kernelspace through a V4L2 buffers queue. It comes with a new metadata capture capability and format description. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: removed left-over 'experimental' note] [hans.verkuil@cisco.com: add newline after _v4l2-meta-format label] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: vsp1: wpf: Implement rotation supportLaurent Pinchart5-54/+177
Some WPF instances, on Gen3 devices, can perform 90° rotation when writing frames to memory. Implement support for this using the V4L2_CID_ROTATE control. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] ov2640: avoid calling ov2640_select_win() twiceHans Verkuil1-11/+7
Simplify ov2640_set_params and ov2640_set_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] ov9740: avoid calling ov9740_res_roundup() twiceHans Verkuil1-17/+1
Simplify ov9740_s_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] ov9640: avoid calling ov9640_res_roundup() twiceHans Verkuil1-21/+3
Simplify ov9640_s_fmt and ov9640_set_fmt Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] ov772x: avoid calling ov772x_select_params() twiceHans Verkuil1-28/+13
Merge ov772x_s_fmt into ov772x_set_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] ov5642: avoid calling ov5642_find_datafmt() twiceHans Verkuil1-1/+1
Simplify ov5642_set_fmt(). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] mt9v022: avoid calling mt9v022_find_datafmt() twiceHans Verkuil1-4/+4
Simplify mt9v022_s_fmt and mt9v022_set_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] mt9m001: avoid calling mt9m001_find_datafmt() twiceHans Verkuil1-4/+4
Simplify mt9m001_s_fmt and mt9m001_set_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] imx074: avoid calling imx074_find_datafmt() twiceHans Verkuil1-1/+1
Simplify imx074_set_fmt(). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] si2157: Add support for Si2141-A10Stefan Brüns2-2/+23
The Si2141 needs two distinct commands for powerup/reset, otherwise it will not respond to chip revision requests. It also needs a firmware to run properly. Cc: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] si2157: revert si2157: Si2141/2151 tuner supportAntti Palosaari2-66/+6
'Reset' loop does not look correct. I tested it very many times and it never repeated those commands. If problem, it tries to solve, really occurs on some situations better solution should be find out. There is another patch which does not have such hackish looking loop. Lets change to it. Cc: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] v4l2-tpg: don't clamp XV601/709 to lim rangeHans Verkuil1-1/+8
The XV601/709 encodings are special: they signal limited range, but use the full range to encode a larger gamut with R', G' and B' values outside the [0-1] range. So don't clamp to limited range for these two encodings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] imon: use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] wl128x: use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] c8sectpfe: use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] fsl-viu: use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] av7110: use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] netup_unidvb: use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ivtv: use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] cx18: use setup_timerGeliang Tang1-3/+1
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] bt8xx: use setup_timerGeliang Tang1-3/+1
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] saa7146: use setup_timerGeliang Tang2-6/+4
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] saa7134: use setup_timerGeliang Tang3-9/+6
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] m2m-deinterlace: don't return zero on failure paths in deinterlace_probe()Alexey Khoroshilov1-0/+1
If DMA does not support INTERLEAVE, deinterlace_probe() breaks off initialization, releases dma channel, but returns zero. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] coda: do not enumerate YUYV if VDOA is not availablePhilipp Zabel1-0/+6
TRY_FMT already disables the YUYV format if the VDOA is not available. ENUM_FMT must do the same. Fixes: d40e98c13b3e ("[media] coda: support YUYV output if VDOA is used") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] tvp5150: fix pad format frame heightPhilipp Zabel1-1/+1
Even if field order is set to V4L2_FIELD_ALTERNATE, the width and height values in struct v4l2_mbus_framefmt still refer to frame size, not field size. Fixes: 4f57d27be2a5 ("[media] tvp5150: fix tvp5150_fill_fmt()") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] tvp5150: allow get/set_fmt on the video source padPhilipp Zabel1-1/+1
To let userspace propagate formats downstream in a media controller scenario, the video source pad (now pad 1, DEMOD_PAD_VID_OUT) must allow setting and getting the format. Incidentally, tvp5150_fill_fmt was implemented for this pad, not for the new analog input pad (now pad 0, DEMOD_PAD_IF_INPUT). Fixes: 55606310e77f ("[media] tvp5150: create the expected number of pads") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] coda: remove redundant call to v4l2_m2m_get_vqColin Ian King1-2/+0
The call to v4ls_m2m_get_vq is only used to get the return value which is not being used, so it appears to be redundant and can be removed. Detected with CoverityScan, CID#1420674 ("Useless call") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] em28xx: drop last soc_camera linkHans Verkuil1-9/+0
The em28xx driver still used the soc_camera.h header for the ov2640 driver. Since this driver no longer uses soc_camera, that include can be removed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ov2640: add MC supportHans Verkuil1-2/+20
The MC support is needed by the em28xx driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ov2640: use standard clk and enable itHans Verkuil1-17/+14
Convert v4l2_clk to normal clk and enable the clock. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ov2640: convert from soc-camera to a standard subdev sensor driverHans Verkuil5-81/+27
Convert ov2640 to a standard subdev driver. The soc-camera driver no longer uses this driver, so it can safely be converted. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] cec: fix confusing CEC_CAP_RC and IS_REACHABLE(CONFIG_RC_CORE) codeHans Verkuil1-3/+5
It is a bit confusing how CEC_CAP_RC and IS_REACHABLE(CONFIG_RC_CORE) interact. By stripping CEC_CAP_RC at the beginning rather than after #else it should be a bit clearer what is going on. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] cec: Fix runtime BUG when (CONFIG_RC_CORE && !CEC_CAP_RC)Lee Jones1-1/+1
Currently when the RC Core is enabled (reachable) core code located in cec_register_adapter() attempts to populate the RC structure with a pointer to the 'parent' passed in by the caller. Unfortunately if the caller did not specify RC capability when calling cec_allocate_adapter(), then there will be no RC structure to populate. This causes a "NULL pointer dereference" error. Fixes: f51e80804f0 ("[media] cec: pass parent device in register(), not allocate()") Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.