aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mfd/arizona-irq.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-28kernel/irq: Extend lockdep class for request mutexAndrew Lunn1-1/+3
The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch
2017-02-13mfd: arizona: Correctly clean up after IRQsCharles Keepax1-18/+41
Currently we leak a lot of things when tearing down the IRQs this patch fixes this cleaning up both the IRQ mappings and the IRQ domain itself. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: arizona: Add defines for IRQs on the main Arizona IRQ domainCharles Keepax1-6/+15
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: arizona: Use arizona_map_irq instead of hard coding itCharles Keepax1-12/+10
We have arizona_map_irq we might as well use it rather than hard coding it in several places. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-29mfd: arizona: Use irq_find_mapping when appropriateCharles Keepax1-4/+4
No need to use irq_create_mapping (although there is no issue with doing so) when we are only looking up an existing mapping. Just to streamline things a little and make the code a little more clear change some calls from irq_create_mapping to irq_find_mapping. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: arizona: Check if AOD interrupts are pending before dispatchingRichard Fitzgerald1-2/+14
Previously the arizona_irq_thread implementation would call handle_nested_irqs() to handle AOD interrupts without checking if any were actually pending. The kernel will see these as spurious IRQs and will eventually disable the IRQ. This patch ensures we only launch the nested handler if there are AOD interrupts pending in the codec. Signed-off-by: Simon Trimmer <simont@opensource.wolfsonmicro.com> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: arizona: Fix lockdep recursion warning on set_irq_wakeCharles Keepax1-0/+3
Avoid a false recursive locking warning from lockdep by adding a lock class for the arizona IRQ chip. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: arizona: Request parent IRQ before we request child IRQsCharles Keepax1-30/+27
Currently the driver requests the boot done and control interface IRQs before it has requested its own IRQ line. This can cause problems on edge triggered IRQ systems as if an edge occurs before the parent IRQ is enabled it will be missed. Whilst we are changing the error handling remove an unused label as well. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-04mfd: arizona: Support Cirrus Logic CS47L24 and WM1831Richard Fitzgerald1-13/+27
This patch adds the regmap configuration tables and core MFD handling for the CS47L24 and WM1831 codecs. Note that compared to the other Arizona codecs, these devices do not have an LDO1 or micsupp regulators, extcon driver, or the DCVDD isolation control. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: arizona: Fix typo in arizona_irq_mapCharles Keepax1-1/+1
The type of the data for the main Arizona IRQ chip should be struct arizona not struct regmap_irq_chip_data. The bug is harmless but should probably be corrected anyway. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11mfd: Kill off set_irq_flags usageRob Herring1-7/+0
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11mfd: arizona: Add support for WM8998 and WM1814Richard Fitzgerald1-0/+9
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: Constify regmap and irq configuration dataKrzysztof Kozlowski1-1/+1
Constify in various drivers configuration data which is not modified: - regmap_irq_chip, - individual regmap_irq's in array, - regmap_config, - irq_domain_ops, Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26mfd: arizona: Add support for WM8280/WM8281Richard Fitzgerald1-0/+1
This adds support for the Wolfson Microelectronics WM8280 and WM8281 codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> [Lee: Minor fixup to remove potentially uninitialised variable. ] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: arizona: Use handle_simple_irq for IRQ dispatch chipCharles Keepax1-1/+1
We use a dummy IRQ chip to dispatch interrupts to the two seperate IRQ domains on the Arizona devices. This is just a simple software IRQ chip and thus the current handle_edge_irq is unnecessary for its needs. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: arizona: Propagate irq_wake through to parent IRQCharles Keepax1-0/+8
If one of the internal Arizona IRQs is set as a wake source this needs to be propogated back to the actual IRQ line that the Arizona device is attached to. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: arizona: Avoid use of legacy IRQ mappingCharles Keepax1-2/+2
regmap_add_irq_chip is called from arizona_irq_init with the irq_base specified as -1 and regmap_add_irq_chip uses if (irq_base) to check if it should use legacy IRQ mapping. As such the irq mappings are currently added with irq_domain_add_legacy, rather than irq_domain_add_linear. This is clearly a typo as there is no reason why this driver can't use irq_domain_add_linear. This patch corrects this by passing the irq_base as zero to regmap_add_irq_chip. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested itCharles Keepax1-7/+12
We only request the control interface error IRQ if we set ctrlif_error, as such we should only free it in that situation. Otherwise we will attempt to free an IRQ we never requested and get a warning from the IRQ core. This patch moves the ctrlif_error variable into the arizona structure and checks it in all cases we free the control interface error IRQ. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: wm5110: Add new interrupt register definitionsCharles Keepax1-1/+9
Newer versions of the IP have a lot of new interrupts and move several existing interrupts. This patch adds the register definitions and regmap hookup for these interrupts. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: arizona: Correct error message for addition of main IRQ chipCharles Keepax1-1/+1
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-18mfd: arizona: Integrate wm8997 into Arizona mfdCharles Keepax1-0/+8
The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus interfacing, for smartphones, tablets and other portable audio devices based on the Arizona platform. This patch integrates the wm8997 into the Arizona mfd. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: arizona: Try to use interrupt flags from interrupt controllerMark Brown1-2/+25
If no irq_flags are passed in platform data then query the interrupt controller for the trigger type and try to use that. This provides default operation with a wider range of hardware and will be needed for device tree support where the interrupt flags are configured on the interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: arizona: Allow GPIO to be specified for IRQ lineMark Brown1-13/+53
If a GPIO is specified for the chip IRQ line then request it. This improves support for systems that do not put pins into input mode when used as interrupts. Also use this GPIO when the primary IRQ is in edge triggered mode to detect if we have handled pending interrupts in order to improve robustness. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: arizona: Basic support for edge triggered IRQsMark Brown1-5/+7
Allow the user to configure edge triggered IRQs, though we do not yet fully handle new interrupts occurring while an interrupt is being handled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: arizona: Clarify error message for failed primary IRQ requestMark Brown1-1/+1
regmap has a very similar looking error, help identify where the error comes from by changing the error message. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: arizona: Disable all wake sources by defaultMark Brown1-0/+3
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-22mfd: arizona: Disable control interface reporting for WM5102 and WM5110Mark Brown1-16/+2
Rather than disabling the error reporting only for earlier revisions unconditionally disable it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-12-16Merge tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds1-0/+1
Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
2012-12-09mfd: arizona: Log if we fail to create the primary IRQ domainMark Brown1-0/+1
This is the only thing in probe for which we don't log an error. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: wm5110: Disable control interface error report for WM5110 rev BMark Brown1-0/+1
It can misreport. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-28mfd: wm5110: Disable control interface error report for WM5110 rev BMark Brown1-0/+1
It can misreport. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: arizona: Remove unused variableMark Brown1-1/+1
Left over as bitrot from previous changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: arizona: Suppress needless calls to the primary IRQMark Brown1-3/+15
We can read back if the primary IRQ is asserted from the register map, meaning that we can suppress polling of the interrupt status registers when only the AoD IRQ domain is asserting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-11mfd: arizona: Disable control interface error reporting for early devicesMark Brown1-7/+28
Early revisions of the initial Arizona-based devices can generate spurious control interface errors in certain circumstances. Avoid causing confusion by disabling the control interface error reporting on these devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Initial support for the WM5110Mark Brown1-0/+6
The WM5110 is a highly-integrated low-power audio system for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high-performance audio hub CODEC. The support is based on the Arizona core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Add missing WM5102 ifdefsMark Brown1-0/+2
References to the WM5102 tables need to be guarded. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-23mfd: arizona: Interrupt supportMark Brown1-0/+267
Several forthcoming Wolfson devices are based on a common platform known as Arizona allowing a great deal of reuse of driver code. This patch adds support for the interrupt controller on Arizona class devices. Since there are two interrupt domains in the device which share a single /IRQ pin by default we use two regmap IRQ domains with a trivial demux interrupt domain used to distribute the interrupts to the two devices. The devices do support multiple interrupt signals, future work will enable support for using this feature to avoid the demux. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.