aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mfd/max8997.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23mfd: max8997: Disable interrupt handling for suspend/resume cycleMarek Szyprowski1-0/+2
Disable IRQs during suspend/resume cycle to ensure handling of wakeup interrupts (i.e. RTC wake alarm) after max8997_resume(). This way it can be properly handled when I2C bus is finally available. This pattern is also used in other MAX PMIC MFD drivers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: max8997: Enale irq-wakeup unconditionallyMarek Szyprowski1-7/+1
IRQ wake up support for MAX8997 driver was initially configured by respective property in pdata. However, after the driver conversion to device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD drivers initialized from device-tree assume that they can be an irq wakeup source, so enable it also for MAX8997. This fixes support for wakeup from MAX8997 RTC alarm. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: maxim: Add SPDX license identifiersKrzysztof Kozlowski1-22/+8
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-16mfd: max8997: Delete error message for a failed memory allocationMarkus Elfring1-3/+1
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max8997: Make it explicitly non-modularPaul Gortmaker1-27/+3
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX8997 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX8997/8966 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: Use to_i2c_client() instead of open-coding itGeliang Tang1-4/+4
Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: max8997: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11mfd: Drop owner assignment from i2c_driversKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: max8997: Make of_device_id array constKrzysztof Kozlowski1-1/+1
Array of struct of_device_id may be be const as expected by both of_match_table field and of_match_node() call. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-0/+18
During probe the driver allocates dummy I2C devices for RTC, haptic and MUIC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-19mfd: max8997: Naturalise cross-architecture discrepanciesLee Jones1-3/+3
If we compile the MAX8997 for a 64bit architecture we receive the following warnings: drivers/mfd/max8997.c: In function ‘max8997_i2c_get_driver_data’: drivers/mfd/max8997.c:173:10: warning: cast from pointer to integer of different size return (int)match->data; ^ Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.Manish Badarkhe1-12/+2
Instead of "#if define CONFIG_OF" use "IS_ENABLED(CONFIG_OF)" option for DT code to avoid if-deffery in code. Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max8997: Enforce mfd_add_devices() return value checkLaszlo Papp1-4/+5
The original author provided a random return value check which is redundant and seemingly floating. This patch not only relocates the check so it is more clearly associated with the invokation of mfd_add_devices(), but provides a store for the error value. We also print a meaningful message on error before returning. Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06mfd: maxim: Constify struct mfd_cell where possibleGeert Uytterhoeven1-1/+1
As of commit 03e361b25ee8dfb1fd9b890072c23c4aae01c6c7 ("mfd: Stop setting refcounting pointers in original mfd_cell arrays"), the "cell" parameter of mfd_add_devices() is "const" again. Hence make all cell data passed to mfd_add_devices() const where possible. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: max8997: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-20mfd: max8997: Use devm_*() functionsJingoo Han1-9/+5
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-01mfd: max8997: Cast void pointer to data of max8997_pmic_dt_matchJingoo Han1-1/+1
Casting (void *) data of max8997_pmic_dt_match is necessary, because variable 'data' of struct 'of_device_id' is defined as 'const void *data'. Thus, pointer should be used instead of value. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-31mfd: Use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-03Drivers: mfd: remove __dev* attributes.Greg Kroah-Hartman1-1/+1
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27regulator: add device tree support for max8997Thomas Abraham1-1/+72
Add device tree based discovery support for max8997. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-15mfd: core: Push irqdomain mapping out into devicesMark Brown1-1/+1
Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Add irq domain support for max8997 interruptsThomas Abraham1-1/+0
Add irq domain support for max8997 interrupts. The reverse mapping method used is linear mapping since the sub-drivers of max8997 such as regulator and charger drivers can use the max8997 irq_domain to get the linux irq number for max8997 interrupts. All uses of irq_base in platform data and max8997 driver private data are removed. Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Add missing max8997 static storage class specifierSachin Kamat1-4/+4
Fixes the following sparse warnings: drivers/mfd/max8997.c:209:4: warning: symbol 'max8997_dumpaddr_pmic' was not declared. Should it be static? drivers/mfd/max8997.c:334:4: warning: symbol 'max8997_dumpaddr_muic' was not declared. Should it be static? drivers/mfd/max8997.c:344:4: warning: symbol 'max8997_dumpaddr_haptic' was not declared. Should it be static? drivers/mfd/max8997.c:426:25: warning: symbol 'max8997_pm' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data and devices for MAX8997 LED controlDonggeun Kim1-1/+2
MAX8997 device does not support LED control function of it. To enable MAX8997-LED driver, platform data and devices for LED are updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds1-0/+1
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31mfd: Add module.h to the implicit drivers/mfd usersPaul Gortmaker1-0/+1
With the pending module.h cleanup, these files will fail to compile, unless they explicitly call out the include of this file. [omap-usb-host addition courtesy of Anand Gadiyar <gadiyar@ti.com>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-24mfd: Wake-up from Suspend MAX8997 supportMyungJoo Ham1-1/+26
- Support wake-up from suspend-to-ram. - Handle pending interrupt after a resume. - If pdata->wakeup is enabled, by default, the device is assumed to be capable of wakeup (the interrupt pin is connected to a wakeup-source GPIO) and may wakeup the system (MAX8997 has a power button input pin). Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-09-06mfd: Set MAX8997 irq pointerMyungJoo Ham1-0/+5
Required platform information is not handed to max8997-irq.c properly. This patch enables to hand over such information to max8997-irq.c so that max8997-irq functions properly. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: MAX8997/8966 supportMyungJoo Ham1-0/+427
MAX8997/MAX8966 chip is a multi-function device with I2C bussses. The chip includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and Battery (charging) control. This patch is an initial release of a MAX8997/8966 driver that supports to enable the chip with its primary I2C bus that connects every device mentioned above except for Fuel Gauge, which uses another I2C bus. The fuel gauge is not supported by this mfd driver and is supported by a seperated driver of MAX17042 Fuel Gauge (yes, the fuel gauge part is compatible with MAX17042). Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.