aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mfd/omap-usb-host.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-01-22mfd: omap-usb-host: Remove some unused functionsRickard Strandqvist1-10/+0
Removes some functions that are not used anywhere: usbhs_readb() usbhs_writeb() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-10-20mfd: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-20mfd: omap-usb-host: Fix %d confusingly prefixed with 0x in format stringHans Wennborg1-1/+1
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-29mfd: omap-usb-host: Fix improper mask use.Michael Welling1-1/+1
single-ulpi-bypass is a flag used for older OMAP3 silicon. The flag when set, can excite code that improperly uses the OMAP_UHH_HOSTCONFIG_UPLI_BYPASS define to clear the corresponding bit. Instead it clears all of the other bits disabling all of the ports in the process. Cc: stable@vger.kernel.org Signed-off-by: Michael Welling <mwelling@emacinc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: omap-usb-host: Make of_device_id array constKrzysztof Kozlowski1-1/+1
Array of struct of_device_id may be be const as expected by of_platform_populate() call. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13mfd: omap-usb-host: Use clock names as per function for reference clocksRoger Quadros1-6/+6
Use a meaningful name for the reference clocks so that it indicates the function. Update the OMAP4+ USB Host node as well to be in sync with the changes. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13mfd: omap-usb-host: Use proper clock name instead of aliasRoger Quadros1-2/+3
Use the proper clock name 'usbhost_120m_fck' instead of the alias 'ehci_logic_fck' Get rid of the 'ehci_logic_fck' alias from the OMAP3 hwmod data as well. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13mfd: omap-usb-host: Always fail on clk_get() errorRoger Quadros1-22/+40
Be more strict and always fail on clk_get() error. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13mfd: omap-usb-host: Get clocks based on hardware revisionRoger Quadros1-11/+32
Not all revisions have all the clocks so get the necessary clocks based on hardware revision. This should avoid un-necessary clk_get failure messages that were observed earlier. Also remove the dummy USB host clocks from the OMAP3 clock data. These are no longer expected by the driver. Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data] Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13mfd: omap-usb-host: Use resource managed clk_get()Roger Quadros1-65/+16
Use devm_clk_get() instead of clk_get(). Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06mfd: omap-usb-host: Raw read and write endian fixVictor Kamensky1-4/+4
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: omap-usb: prepare/unprepare clock while enable/disableRoger Quadros1-8/+8
This should fix the following warning at boot on OMAP5 uEVM [ 8.783155] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x94/0xa4() Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: omap-usb: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: omap-usb-host: Staticize usbhs_driver_nameSachin Kamat1-1/+1
usbhs_driver_name is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-31mfd: Use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-04-09mfd: omap-usb-host: Convert to devm_ioremap_resource()Sachin Kamat1-5/+4
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09mfd: omap-usb-host: Add device tree support and binding informationRoger Quadros1-6/+155
Allows the OMAP HS USB host controller to be specified via device tree. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09mfd: omap-usb-host: Remove PHY reset handling codeRoger Quadros1-28/+0
PHY reset GPIO handling will be done in the PHY driver Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09mfd: omap-usb-tll: Move configuration code to omap_tll_init()Roger Quadros1-2/+5
This is because we want to get rid of platform_data usage from probe(). The only information we need is PORT_MODE, and this can be supplied to us by the user (i.e. omap-usb-host.c). We also move channel clock management from runtime PM handlers into omap_tll_enable/disable(). Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09mfd: omap-usb-host: Update nports in platform_dataRoger Quadros1-0/+1
EHCI driver would need to know the number of ports available on the platform. We set the nports parameter of platform_data based on IP version if it was not already provided. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: omap-usb-host: Use devm_gpio_request_one()Jingoo Han1-21/+2
Use devm_gpio_request_one() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: omap-usb-host: Actually update hostconfigRoger Quadros1-3/+3
The helper functions omap_usbhs_rev1_hostconfig() and omap_usbhs_rev2_hostconfig() don't write into the hostconfig register. Make sure that we write the return value into the hostconfig register. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-13mfd: omap-usb-host: get rid of build warningRoger Quadros1-1/+1
Fixes the below build warning when driver is built-in. drivers/mfd/omap-usb-host.c:750:12: warning: ‘usbhs_omap_remove’ defined but not used [-Wunused-function] Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: Don't spam console on clk_set_parent failureRoger Quadros1-9/+9
clk_set_parent is expected to fail on OMAP3 platforms. We don't consider that as fatal so don't spam console. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: clean up omap_usbhs_init()Roger Quadros1-48/+81
We split initializing revision 1 and revision 2 into different functions. Initialization is now done dynamically so that only the number of ports available on the system are initialized. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: Get rid of unnecessary spinlockRoger Quadros1-16/+0
The driver does not have an interrupt handler and we don't really need a spinlock, so get rid of it. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: Manage HSIC clocks for HSIC modeRoger Quadros1-14/+83
Enable the optional HSIC clocks (60MHz and 480MHz) for the ports that are configured in HSIC mode. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: cleanup clock management codeRoger Quadros1-80/+106
All ports have similarly named port clocks so we can bunch them into a port data structure and use for loop to enable/disable the clocks. Dynamically allocate and get clocks based on number of ports available on the platform Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: override number of ports from platform dataRoger Quadros1-13/+21
Both OMAP4 and 5 exhibit the same revision ID in the REVISION register but they have different number of ports i.e. 2 and 3 respectively. So we can't rely on REVISION register for number of ports on OMAP5 and depend on platform data (or device tree) instead. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: know about number of ports from revision registerRoger Quadros1-5/+28
The revision register should tell us how many ports are present. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: Use devm_kzalloc() and devm_request_and_ioremap()Roger Quadros1-27/+11
Use devm_ variants of kzalloc and ioremap. Also clean up error path. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap_usb_host: Avoid missing platform data checks in suspend/resumeRoger Quadros1-10/+0
Get rid of the unnecessary missing platform data checks in runtime_suspend/resume. We are already checking for missing platform data in probe. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-02-13mfd: omap-usb-host: Consolidate OMAP USB-HS platform data (part 2/3)Roger Quadros1-37/+26
Let's have a single platform data structure for the OMAP's High-Speed USB host subsystem instead of having 3 separate ones i.e. one for board data, one for USB Host (UHH) module and one for USB-TLL module. This makes the code much simpler and avoids creating multiple copies of platform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> For the ehci-omap.c part: Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-12-14mfd: omap-usb-host: get rid of cpu_is_omap..() macrosRoger Quadros1-2/+1
Instead of using cpu_is_omap..() macros in the device driver we rely on information provided in the platform data. The only information we need is whether the USB Host module has a single ULPI bypass control bit for all ports or individual bypass control bits for each port. OMAP3 REV2.1 and earlier have the former. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> [tony@atomide.com: updated to remove plat/cpu.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+4
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-11-28mfd: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mfd: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h>Felipe Balbi1-1/+4
In order to make single zImage work for ARM architecture, we need to make sure we don't depend on private headers. Move USB platform_data to <linux/platform_data/omap-usb.h> and add a minimal drivers/mfd/usb-omap.h. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated for local mfd/usb-omap.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-21mfd: omap-usb-host: Remove TLL specific code from USB HS core driverKeshava Munegowda1-221/+10
The TLL specific code such as channels clocks enable/disable, initialization functions are removed from the USBHS core driver. The hwmod of the usb tll is retrieved and omap device build is performed to created the platform device for the usb tll component. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-21mfd: omap-usb-host: Invoke the TLL driver from USB HS core driverKeshava Munegowda1-2/+5
The usbhs driver invokes the enable/disable APIs of the usb tll driver in the runtime resume/suspend callbacks of the runtime get sync and put sync of the usbhs driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues.Russ Dill1-1/+47
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-01mfd: Fix build breakage in omap-usb-host.cRuss Dill1-0/+1
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' removes the include for linux/gpio.h from omap-usb-host.c. This include indirectly includes plat/cpu.h which is required by omap-usb-host.c. Fix the build breakage by including it directly. Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issueKeshava Munegowda1-44/+0
It is observed that the echi ports of 3430 sdp board are not working due to the random timing of programming the associated GPIOs of the ULPI PHYs of the EHCI for reset. If the PHYs are reset at during usbhs core driver, host ports will not work because EHCI driver is loaded after the resetting PHYs. The PHYs should be in reset state while initializing the EHCI controller. The code which does the GPIO pins associated with the PHYs are programmed to reset is moved from the USB host core driver to EHCI driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Move omap-usb-host usbhs init before allocing child devGovindraj.R1-2/+1
There could be possible race condition where the host dev's are alloced and added to platform dev just before usbhs_init. Just move usbhs_init before adding child dev. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Remove omap-usb-host magic numbers for dev dma maskGovindraj.R1-2/+2
Remove the hardcoded magic values for dma mask and use the dma mask api/macro available. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-13Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds1-12/+6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-09mfd: Use gpio_request_one from omap-usb-hostAxel Lin1-12/+6
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-16MFD: OMAP: USB: Runtime PM supportKeshava Munegowda1-450/+303
The usbhs core driver does not enable/disable the interface and functional clocks directly, These clocks are handled by runtime pm, hence instead of the clock enable/disable, the runtime pm APIS are used. however,the optional clocks and port clocks are handled by the usbhs core. Dependency: This patch is dependent on this series: [PATCH 0/5 v13 or latest version] omap: usb: host: Runtime PM preparation for EHCI and OHCI drivers. Validation performed: The global suspend/resume of EHCI and OHCI is validated on OMAP3430 sdp board with this patch combined with the series: [PATCH 0/5 v13 or latest version] omap: usb: host: Runtime PM preparation for EHCI and OHCI drivers. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-16ARM: OMAP: USB: device name change for the clk names of usbhsKeshava Munegowda1-1/+1
device name usbhs clocks are changed from usbhs-omap.0 to usbhs_omap; this is because in the hwmod registration the device name is set as usbhs_omap; The redudant clock nodes are removed. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-06mfd: Fix omap-usb-host build failureMing Lei1-0/+1
The patch fixes the build failure: drivers/mfd/omap-usb-host.c:1034:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1034:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/mfd/omap-usb-host.c:1034:1: warning: parameter names (without types) in function declaration drivers/mfd/omap-usb-host.c:1040:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1040:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/mfd/omap-usb-host.c:1040:1: warning: parameter names (without types) in function declaration drivers/mfd/omap-usb-host.c:1045:13: error: 'THIS_MODULE' undeclared here (not in a function) drivers/mfd/omap-usb-host.c:1050:15: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1050:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1050:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mfd/omap-usb-host.c:1050:15: warning: function declaration isn't a prototype drivers/mfd/omap-usb-host.c:1051:14: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1051:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1051:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/mfd/omap-usb-host.c:1051:14: warning: function declaration isn't a prototype drivers/mfd/omap-usb-host.c:1052:16: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1052:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1052:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/mfd/omap-usb-host.c:1052:16: warning: function declaration isn't a prototype drivers/mfd/omap-usb-host.c:1053:20: error: expected declaration specifiers or '...' before string constant drivers/mfd/omap-usb-host.c:1053:1: warning: data definition has no type or storage class drivers/mfd/omap-usb-host.c:1053:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/mfd/omap-usb-host.c:1053:20: warning: function declaration isn't a prototype make[2]: *** [drivers/mfd/omap-usb-host.o] Error 1 CC fs/proc/namespaces.o make[1]: *** [drivers/mfd] Error 2 make: *** [drivers] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.