aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2012-11-23mfd: wm8994: Add support for WM1811 rev EMark Brown1-0/+1
This is supported identically to the previous revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23mfd: ab8500-core: Add abx500-clk as an mfd child deviceUlf Hansson1-0/+4
Hierarchically, the abx500-clk shall be considered as a child of the ab8500 core. The abx500-clk is intiated at arch init and thus the clks will be available when clients needs them. Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23mfd: Add an AS3711 PMIC MFD driverGuennadi Liakhovetski3-0/+227
AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC, a battery charger and a general purpose ADC. This patch adds support for the MFD with support for a regulator driver and a backlight driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23mfd: stmpe: Use devm_*() routinesViresh Kumar1-39/+21
This patch frees stmpe driver from tension of freeing resources. devm_* derivatives of multiple routines are used while allocating resources, which would be freed automatically by kernel. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-22Input: stmpe-ts - add DT support for stmpe touchscreenVipul Kumar Samar1-0/+1
This patch allows the STMPE Touchscreen driver to be successfully probed and initialised when Device Tree support is enabled. Bindings are mentioned in Documentation too. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21mfd: twl4030: Fix chained irq handling on resume from suspendKalle Jokiniemi1-1/+2
The irqs are enabled one-by-one in pm core resume_noirq phase. This leads to situation where the twl4030 primary interrupt handler (PIH) is enabled before the chained secondary handlers (SIH). As the PIH cannot clear the pending interrupt, and SIHs have not been enabled yet, a flood of interrupts hangs the device. Fixed the issue by setting the SIH irqs with IRQF_EARLY_RESUME flags, so they get enabled before the PIH. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@jollamobile.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: lpc_ich: One uninitialized cell is no errorPaul Bolle1-5/+6
At every boot of an (outdated) laptop lpc_ich prints an error: lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized But if one looks at lpc_ich's probe function one notices that the code only cares if both lpc_ich_init_wdt() and lpc_ich_init_gpio() fail to add any cells. So stop treating the failure to add a single cell as an error. Those messages can be printed at notice level. And then only warn if no cells were added. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: lpc_ich: Fix resource request for [mem 0x00000000]Peter Hurley1-1/+4
The older southbridges supported by the lpc_ich driver do not provide memory-mapped space of the root complex. The driver correctly avoids computing the iomem address in this case, yet submits a zeroed resource request anyway (via mfd_add_devices()). Remove the iomem resource from the resource array submitted to the mfd core for the older southbridges. Acked-by: Aaron Sierra <asierra@xes-inc.com> Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl-core: Change TWL4030_MODULE_* ids to TWL_MODULE_*Peter Ujfalusi1-8/+6
To facilitate upcoming cleanup in twl stack. No functional changes. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl4030-irq: Change TWL4030_MODULE_* ids to TWL_MODULE_*Peter Ujfalusi1-2/+2
To facilitate upcoming cleanup in twl stack. No functional changes. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl4030-power: Change TWL4030_MODULE_* ids to TWL_MODULE_*Peter Ujfalusi1-73/+51
To facilitate upcoming cleanup in twl stack. No functional changes. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl4030-madc: Change TWL4030_MODULE_* ids to TWL_MODULE_*Peter Ujfalusi1-7/+7
To facilitate upcoming cleanup in twl stack. No functional changes. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl-core: re-group the twl_mapping table for easier readingPeter Ujfalusi1-4/+5
Group the twl_mapping table in 5 lines chunks so it is more easier to find the row we are looking for (if we need to). Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl: Convert module id definitions to enumsPeter Ujfalusi1-6/+3
Use enum list for the module definitions (TWL4030_MODULE_*) which will ease up future work with the IDs. At the same time group the IDs in block of five so it is easier to find the ID we are looking for (to count the number they stand for). At the same time define TWL_MODULE_LED so client drivers can switch to use it as soon as it is possible. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl-core: Clean up and correct child registrationPeter Ujfalusi1-15/+12
Make the twl child registration calls a bit more uniform by always using the SUB_CHIP_ID* define instead of the mixed use of the define and magic number. At the same time correct the following devices so they are registered for the correct parent device (i2c slave): twl4030_wdt is accessible on 0x4b address and not 0x48 twl4030_pwrbutton is accessible on 0x4b address and not 0x49 twl4030-audio is on 0x49 all the time Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd/rtc/gpio: twl: No need to allocate bigger buffer for writePeter Ujfalusi3-12/+7
Since the twl-core has been converted to use regmap it is no longer needed to allocate bigger buffer for data when writing to twl. CC: Grant Likely <grant.likely@secretlab.ca> CC: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl-core: Convert to use regmap for I/OPeter Ujfalusi1-65/+78
Remove the custom code to do I/O and replace it with standard regmap calls. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl-core: Support for proper PWM driversPeter Ujfalusi1-2/+9
The twl6030-pwm driver is going to be deleted since it was only able to control the Charging indicator LED on the twl6030 PMIC. The new set of drivers are going to provide support for both PWMs and PWM driven LED outputs on TWL4030 and TWL6030 PMICs. The twl-pwm driver will handle the PWMs (2 instance) while the twl-pwmled driver is to control the two LED instance on TWL4030 and to charging indicator LED (1 instance) on TWL6030. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl-core: Register twl4030-madc child only for twl4030 classPeter Ujfalusi1-1/+2
twl4030-madc driver can only handle twl4030 class MADC. The newer revisions of twl does not have MADC, instead they have different IP called GPADC which is not backward compatible. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: Introduce retu-mfd driverAaro Koskinen3-0/+274
Retu is a multi-function device found on Nokia Internet Tablets implementing at least watchdog, RTC, headset detection and power button functionality. This patch implements minimum functionality providing register access, IRQ handling and power off functions. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: twl6040: Remove duplicate inclusion of linux/err.hSachin Kamat1-1/+0
linux/err.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: wm5102: Make FLL NCO test registers readableMark Brown1-0/+4
They contain documented status readback fields. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: tps65217: Set PMIC to shutdown on PWR_EN toggleColin Foe-Parker1-0/+12
Set tps65217 PMIC status to OFF if power enable toggle is supported. By setting this bit to 1 to enter PMIC to OFF state when PWR_EN pin is pulled low. Also adds a DT flag to specify that device pmic supports shutdown control or not. Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com> [anilkumar@ti.com: move the additions to tps65217 MFD driver] Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: tps65090: Use regmap irq framework for interrupt supportLaxman Dewangan1-165/+98
Use the regmap irq framework for implementing TPS65090 interrupt support in place of implementing it locally. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: tps65090: Move register access APIs to headerLaxman Dewangan1-34/+0
Since tps65090 register is accessed via regmap, moving the register access APIs to header and making it as inline. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: tps65090: Remove unused member of struct tps65090Laxman Dewangan1-5/+1
Remove unused member from tps65090 data structure as these are not used. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: tps65090: Add error prints when mem alloc failedLaxman Dewangan1-3/+4
Add error prints when memory allocation failed for tps65090 data. Also cleanups the melloc arguments. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: Add battery charger in tps65090 sub devsLaxman Dewangan1-1/+1
TPS65090 supports the battery charging and hence adding the device name in the list of TPS65090 children. Also remove the tps65090-regulator as it duplicates with tps65090-pmic for regulator driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mfd: Add TI TPS80031 mfd core driverLaxman Dewangan3-0/+588
TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. The device provides five configurable step-down converters, 11 general purpose LDOs, USB OTG Module, ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with Power Path from USB, 32K clock generator. Add the mfd core driver for TPS80031/TPS80032. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: arizona: Sync regcache after resetCharles Keepax1-0/+8
In the absence of a physical reset line the chip is reset by writing the first register, which is done after the register patch has been applied. This patch synchronises the register cache after the reset to preserve any register changes that had been applied. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: arizona: Correctly report when AIF2/AIF1 is underclockedCharles Keepax1-2/+2
In the interrupt handler for an underclocked event, whilst checking for the source of the interrupt, AIF3 was checked twice and AIF1 was not checked. This change correctly checks the AIF1 underclocked bit and reports the correct error messages for all cases. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: arizona: Use correct array for ARRAY_SIZE in mfd_add_devices callCharles Keepax1-1/+1
wm5102_devs array was used for ARRAY_SIZE whilst adding the wm5110 devices. This change corrects this to get the size from the wm5110_devs array. As both arrays are the same size no issues should have been caused by this bug. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: wm5110: Disable control interface error report for WM5110 rev BMark Brown1-0/+1
It can misreport. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: wm5102: Update register patch for latest evaluationMark Brown1-518/+1
Latest evaluation of the device has provided some revisions to the configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: twl-core: Fix chip ID for the twl6030-pwm modulePeter Ujfalusi1-1/+1
The correct chip id is 1 since the PWM module is on address 0x49. With the current TWL6030_MODULE_ID1 the kernel will crash early since we have: #define TWL6030_MODULE_ID1 0x0E and static struct twl_client twl_modules[4]; Down in the stack we try to get the module by: struct twl_client *twl = &twl_modules[chip]; Which is obviously going to do nasty things. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: wm5102: Mark some more status registers as volatileMark Brown1-0/+3
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: wm5102: Update maximum registerMark Brown1-2/+4
The DSP memories are mapped into the register map, make them readable and writable by updating max_register appropriately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add myself to copyrightDavide Ciminaghi1-1/+1
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add scr (otp registers) platform driverDavide Ciminaghi1-1/+51
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Use one lock per device instead of one lock per mfdDavide Ciminaghi1-4/+6
The lock is used to implement atomic operations on each platform device's registers, so it looks reasonable having one lock per device instead of one common lock for all the devices belonging to the same sta2x11 instance. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Do not mind about gpio platform dataDavide Ciminaghi1-11/+0
The gpio platform driver will take care of its platform data, let's not do any checks here. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Only add sta2x11_mfd if it hasn't already been addedDavide Ciminaghi1-1/+2
The pci probe method is called twice now, so we have to call sta2x11_mfd_add() only once to avoid a -EBUSY error. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Use defines for platform devices' namesDavide Ciminaghi1-20/+22
Since there are now many sta2x11-mfd platform devices, using defines for their names looks like a better solution. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add sta2x11_mfd_get_regs_data() functionDavide Ciminaghi1-0/+22
A couple of predefined clocks (mux and gated) need to be initialized with the virtual address of the clock's controlling register and the address of a spinlock used to protect against races. This function exports such data for all the mfd cells. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add regmap supportDavide Ciminaghi2-105/+130
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add apb-soc regs driver and factor out common codeDavide Ciminaghi1-109/+241
A driver for the apb-soc registers is needed by the clock infrastructure code to configure and control clocks on the sta2x11 chip. Since some of the functions in sta2x11-mfd.c were almost identical for the two existing platform devices, the following changes have been performed to avoid further code duplication while adding the apb-soc-regs driver: * The sctl_regs and apbreg_regs fields in struct sta2x11_mfd have been turned into just one array of pointers accessed by device index. * Platform probe methods have become one-liners invoking a common probe with the device's index as second parameter. * For loops have been inserted where the same operations were performed for each of the two bars of a pci device. * The apbreg_mask and sctl_mask functions were almost identical, so they were turned into inline functions invoking a common __sta2x11_mfd_mask() with the platform device's index as last parameter. To do this, enum sta2x11_mfd_plat_dev has been declared in sta2x11-mfd.h and more device types have been added to it. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20iio: adc: Add viperboard adc driverLars Poeschel1-0/+3
This adds the mfd cell to use the adc part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20i2c: Add viperboard i2c master driverLars Poeschel1-0/+3
This adds the mfd cell to use the i2c part of the Nano River Technologies viperboard as i2c master. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20gpio: Add viperboard gpio driverLars Poeschel1-0/+3
This adds the mfd cell to use the gpio a and gpio b part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: Add viperboard driverLars Poeschel3-0/+144
Add mfd driver for Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.