| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add __cpu_to_le16/32/64 and __le16/32/64_to_cpu where needed according to
sparse.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following sparse warnings:
drivers/misc/habanalabs/hwmon.c:20:56: warning: Using plain integer as NULL pointer
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch provides a workaround for a bug in the F/W where the response
time for a request from KMD may take more then 100ms. This could cause the
queue between KMD and the F/W to get out of sync.
The WA is to:
1. Increase the timeout of ALL requests to 1s.
2. In case a request isn't answered in time, mark the state as
"cpu_disabled" and prevent sending further requests from KMD to the F/W.
This will eventually lead to a heartbeat failure and hard reset of the
device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for doing various on-the-fly reset of Goya.
The driver supports two types of resets:
1. soft-reset
2. hard-reset
Soft-reset is done when the device detects a timeout of a command
submission that was given to the device. The soft-reset process only resets
the engines that are relevant for the submission of compute jobs, i.e. the
DMA channels, the TPCs and the MME. The purpose is to bring the device as
fast as possible to a working state.
Hard-reset is done in several cases:
1. After soft-reset is done but the device is not responding
2. When fatal errors occur inside the device, e.g. ECC error
3. When the driver is removed
Hard-reset performs a reset of the entire chip except for the PCI
controller and the PLLs. It is a much longer process then soft-reset but it
helps to recover the device without the need to reboot the Host.
After hard-reset, the driver will restore the max power attribute and in
case of manual power management, the frequencies that were set.
This patch also adds two entries to the sysfs, which allows the root user
to initiate a soft or hard reset.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch add the sysfs and hwmon entries that are exposed by the driver.
Goya has several sensors, from various categories such as temperature,
voltage, current, etc. The driver exposes those sensors in the standard
hwmon mechanism.
In addition, the driver exposes a couple of interfaces in sysfs, both for
configuration and for providing status of the device or driver.
The configuration attributes is for Power Management:
- Automatic or manual
- Frequency value when moving to high frequency mode
- Maximum power the device is allowed to consume
The rest of the attributes are read-only and provide the following
information:
- Versions of the various firmwares running on the device
- Contents of the device's EEPROM
- The device type (currently only Goya is supported)
- PCI address of the device (to allow user-space to connect between
/dev/hlX to PCI address)
- Status of the device (operational, malfunction, in_reset)
- How many processes are open on the device's file
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Oded Gabbay