aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/misc/vmw_vmci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-28vmw_vmci: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-3/+4
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09VMCI: fix error handling path when registering guest driverDmitry Torokhov1-4/+6
When host capabilities check failed or when we were unable to register doorbell bitmap we were forgetting to set error code and were returning 0 which would make upper layers believe that probe was successful. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05vmw_vmci: Convert driver to use get_user_pages_fast()Jan Kara2-20/+7
Convert vmci_host_setup_notify() and qp_host_get_user_memory() to use get_user_pages_fast() instead of get_user_pages(). Note that qp_host_get_user_memory() was using mmap_sem for writing without an apparent reason. CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26VMCI: fix to pass correct device identity to free_irq()Wei Yongjun1-1/+1
free_irq() expects the same device identity that was passed to corresponding request_irq(), otherwise the IRQ is not freed. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27VMCI: Add support for virtual IOMMUAndy King4-83/+128
This patch adds support for virtual IOMMU to the vmci module. We switch to DMA consistent mappings for guest queuepair and doorbell pages that are passed to the device. We still allocate each page individually, since there's no guarantee that we'll get a contiguous block of physical for an entire queuepair (especially since we allow up to 128 MiB!). Also made the split between guest and host in the kernelIf struct much clearer. Now it's obvious which fields are which. Acked-by: George Zhang <georgezhang@vmware.com> Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27VMCI: Remove non-blocking/pinned queuepair supportAndy King2-145/+22
We added this for a special case that doesn't exist on Linux. Remove the non-blocking/pinned queuepair code and simplify the driver in preparation for adding virtual IOMMU support. Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20Hoist memcpy_fromiovec/memcpy_toiovec into lib/Rusty Russell2-2/+2
ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-03misc/vmw_vmci: Add dependency on CONFIG_NETGuenter Roeck1-1/+1
Building the vmw_vmci driver with CONFIG_NET undefined results in: drivers/built-in.o: In function `__qp_memcpy_from_queue.isra.13': vmci_queue_pair.c:(.text+0x1671a8): undefined reference to `memcpy_toiovec' drivers/built-in.o: In function `__qp_memcpy_to_queue.isra.14': vmci_queue_pair.c:(.text+0x167341): undefined reference to `memcpy_fromiovec' make[1]: [vmlinux] Error 1 (ignored) since memcpy_toiovec and memcpy_fromiovec are defined in the networking code. Add the missing dependency. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15VMCI: Fix process-to-process DRGAMs.Andy King1-1/+3
When sending between processes, we always schedule a work item. Our work info struct has the message embedded in the middle, which means that we end up overwriting subsequent fields when we copy the (variable-length) message into it. Move it to the end of the struct. Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin2-9/+4
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-25drivers, vmci: Fix build errorDavid Rientjes1-0/+1
We can't rely on vmalloc.h being included by other included files because under some configs it is possible for the build to fail: drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_free_queue': drivers/misc/vmw_vmci/vmci_queue_pair.c:270: error: implicit declaration of function 'vunmap' drivers/misc/vmw_vmci/vmci_queue_pair.c:277: error: implicit declaration of function 'vfree' drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_alloc_queue': drivers/misc/vmw_vmci/vmci_queue_pair.c:302: error: implicit declaration of function 'vmalloc' drivers/misc/vmw_vmci/vmci_queue_pair.c:302: warning: assignment makes pointer from integer without a cast drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: implicit declaration of function 'vmap' drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: 'VM_MAP' undeclared (first use in this function) drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: (Each undeclared identifier is reported only once drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: for each function it appears in.) drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_host_map_queues': drivers/misc/vmw_vmci/vmci_queue_pair.c:843: error: 'VM_MAP' undeclared (first use in this function) Fix the build by directly including vmalloc.h. Signed-off-by: David Rientjes <rientjes@google.com> Cc: George Zhang <georgezhang@vmware.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22VMCI: Fix broken context ID retrievalAndy King1-4/+1
I'm an idiot. The context ID can be a really large unsigned number, which means it'll appear negative as an int. So actually the right fix here is just to set it regardless of the returned value (but only for this particular hypercall; normally we would check it). Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: include slab.h into files using kmalloc/kfreeDmitry Torokhov2-0/+4
Do not rely on implicit header dependencies as they are known to break. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: rename PPNset to ppn_set to avoid camel caseDmitry Torokhov2-5/+5
Acked-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Fix "always true condition"Andy King1-1/+1
vmci_send_datagram() returns an int, with negative values indicating failure. But we store it locally in a u32, which makes comparison of >= 0 useless. Fixed to use an int. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Fix deref before NULL-check of queuepair ptrAndy King1-2/+2
Check for a valid queuepair ptr before trying to lock the queuepair (which will deref it). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Remove dependency on BLOCK I/OAndy King1-12/+16
No need to bring in dm-mapper.h and along with it a dependency on BLOCK I/O just to use dm_div_up(). Just use the existing DIV_ROUND_UP(). Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Add PCI as a dependencyAndy King1-1/+1
Add PCI as a dependency to our build, since we always compile in the guest-side PCI device support. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: Some header and config files.George Zhang2-0/+20
VMCI head config patch Adds all the necessary files to enable building of the VMCI module with the Linux Makefiles and Kconfig systems. Also adds the header files used for building modules against the driver. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: host side driver implementation.George Zhang1-0/+1042
VMCI host side driver code implementation. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: guest side driver implementation.George Zhang1-0/+759
VMCI guest side driver code implementation. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: routing implementation.George Zhang2-0/+256
VMCI routing code is responsible for routing between various hosts/guests as well as routing in nested scenarios. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: resource object implementation.George Zhang2-0/+288
VMCI resource tracks all used resources within the vmci code. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: queue pairs implementation.George Zhang2-0/+3611
VMCI queue pairs allow for bi-directional ordered communication between host and guests. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: handle array implementation.George Zhang2-0/+194
VMCI handle code adds support for dynamic arrays that will grow if they need to. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: event handling implementation.George Zhang2-0/+249
VMCI event code that manages event handlers and handles callbacks when specific events fire. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: device driver implementaton.George Zhang2-0/+167
VMCI driver code implementes both the host and guest personalities of the VMCI driver. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: doorbell implementation.George Zhang2-0/+655
VMCI doorbell code allows for notifcations between host and guest. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: datagram implementation.George Zhang2-0/+552
VMCI datagram Implements datagrams to allow data to be sent between host and guest. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08VMCI: context implementation.George Zhang2-0/+1396
VMCI Context code maintains state for vmci and allows the driver to communicate with multiple VMs. Signed-off-by: George Zhang <georgezhang@vmware.com> Acked-by: Andy king <acking@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.