linux-dev - Linux kernel development work

Age	Commit message (Collapse)	Author	Files	Lines
2011-05-24	mmc: sd: add support for driver type selection	Arindam Nath	1	-1/+1
	This patch adds support for setting driver strength during UHS-I initialization procedure. Since UHS-I cards set S18A (bit 24) in response to ACMD41, we use this as a base for UHS-I initialization. We modify the parameter list of mmc_sd_get_cid() so that we can save the ROCR from ACMD41 to check whether bit 24 is set. We decide whether the Host Controller supports A, C, or D driver type depending on the Capabilities register. Driver type B is suported by default. We then set the appropriate driver type for the card using CMD6 mode 1. As per Host Controller spec v3.00, we set driver type for the host only if Preset Value Enable in the Host Control2 register is not set. SDHCI_HOST_CONTROL has been renamed to SDHCI_HOST_CONTROL1 to conform to the spec. Tested by Zhangfei Gao with a Toshiba uhs card and general hs card, on mmp2 in SDMA mode. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-08-11	mmc: split mmc_sd_init_card()	Michal Miroslaw	1	-0/+17
	This series adds support for SD combo cards to MMC/SD driver stack. SD combo consists of SD memory and SDIO parts in one package. Since the parts have a separate SD command sets, after initialization, they can be treated as independent cards on one bus. Changes are divided into two patches. First is just moving initialization code around so that SD memory part init can be called from SDIO init. Second patch is a proper change enabling SD memory along SDIO. I tried to move as much no-op changes to the first patch so that it's easier to follow the required changes to initialization flow for SDIO cards. This is based on Simplified SDIO spec v.2.00. The init sequence is slightly modified to follow current SD memory init implementation. Command sequences, assuming SD memory and SDIO indeed ignore unknown commands, are the same as before for both parts. This patch: Prepare for SD-combo (IO+mem) support by splitting SD memory card init and related functions. Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>