aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
AgeCommit message (Collapse)AuthorFilesLines
2014-05-22mmc: sdhci: move FSL ESDHC reset handling quirk into esdhc codeRussell King3-8/+10
The Freescale esdhc driver is the only driver which needs the interrupt registers restored after a reset. Move this quirk to be part of the ESDHC driver implementation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert reset into a library functionRussell King19-31/+53
Rather than having platform_reset_enter/platform_reset_exit methods, turn the core of the reset handling into a library function which platforms can call at the appropriate moment in their (new) reset method. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert generic bus width setup to library functionRussell King19-50/+50
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: plug hole in disabling card detection interruptsRussell King1-8/+9
When we disable card detection interrupts, we should disable both the insert and remove interrupts irrespective of the current state - this avoids races between the hardware card detect changing state before we've read that updated state and altered the interrupt mask. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: more efficient interrupt enable register handlingRussell King1-51/+47
Rather than wasting cycles read-modify-writing the interrupt enable registers, cache the value locally instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: allow sdio interrupts while sdhci runtime suspendedRussell King3-8/+16
Allow SDIO interrupts to be received while the SDHCI host is runtime suspended. We do this by leaving the AHB clock enabled while the host is runtime suspended so we can access the SDHCI registers, and so read and raise the SDIO card interrupt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: push card_tasklet into threaded irq handlerRussell King1-14/+9
There's no requirement to have the card tasklet separate now that we have a threaded interrupt handler, so kill this and move the called code into the threaded part of the handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert to new SDIO IRQ handlingRussell King1-23/+39
Use a generic threaded interrupt handler for SDIO interrupt handling, rather than allowing the SDIO core code to buggily spawn its own thread. This results in host drivers to be more in control of how SDIO interrupts are acknowledged in the hardware, rather than having the internals of the SDIO core placed upon them, possibly resulting in sub-standard handling. At least one SDHCI implementation specifies a very specific sequence to deal with a card interrupt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: clean up sdio interrupt enable handlingRussell King1-18/+17
We don't need to change the SDHCI_SDIO_IRQ_ENABLED flag when we're merely receiving an interrupt - IRQ handling thread in the MMC core will either re-enable or disable the interrupt via the enable_sdio_irq callback, which will update this status appropriately. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: clean up interrupt handlingRussell King1-65/+57
sdhci interrupt handling is a mess; there is a lot of code doing very similar things. Let's clean this up a bit: 1. set's clear down cmd, data and bus power interrupts in one go - we're always going to handle these. 2. use a do { } while () loop for looping while there are pending interrupts. 3. group clearing of bits in intmask into one place. This results in the code becoming simpler and easier to read. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-20mmc: mmci: Enforce max frequency configuration through DTUlf Hansson1-4/+1
Remove the option to provide a maximum frequency as platform data, enforce it through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-16drivers/mmc/host/mmc_spi.c: Use get/put_unaligned_be32George Spelvin1-12/+6
Very minor source and binary size reduction. Signed-off-by: George Spelvin <linux@horizon.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16lib/crc7: Shift crc7() output left 1 bitGeorge Spelvin1-1/+1
This eliminates a 1-bit left shift in every single caller, and makes the inner loop of the CRC computation more efficient. Renamed crc7 to crc7_be (big-endian) since the interface changed. Also purged #include <linux/crc7.h> from files that don't use it at all. Signed-off-by: George Spelvin <linux@horizon.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13mmc: sdhci: remove mdelay in eMMC tuningNick Sanders1-1/+4
This patch removes an unneccesary 1ms mdelay in the HS200 tuning loop, called 40 times per retuning. Currently this causes a latency of >40ms on any emmc accesses triggering wake from runtime PM, which can occur for a significant portion of reads on a mostly idle system. The delay is left in place for SD Cards, which use MMC_SEND_TUNING_BLOCK rather than MMC_SEND_TUNING_BLOCK_HS200. I'm not able to find evidence that this is required for SD in the specs I have access to, however this delay has been present from initial checkin for SD so I have preserved the original behavior for compatibility. This has been verified to fix observed glitching on local audio playback and recording on apps with inbuilt assumptions on storage latency. Signed-off-by: Nick Sanders <nsanders@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mxcmmc: Use mmc_regulator_get_supply() APIAlexander Shiyan1-27/+17
This patch replaces regulator manipulation with mmc_regulator_get_supply() function from MMC core. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: atmel: don't test host->dataAlexandre Belloni1-10/+3
Found using smatch: drivers/mmc/host/atmel-mci.c:827 atmci_pdc_complete() warn: variable dereferenced before check 'host->data' (see line 807) Stop testing host->data as it is not NULL at that point. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: rtsx: fix possible linking error if built-inArnd Bergmann1-2/+3
rtsx_usb_sdmmc module uses the LED classdev if available, but the code failed to consider the situation that it is built-in and the LED classdev is a module, leading to following linking error: LD init/built-in.o drivers/built-in.o: In function `rtsx_usb_sdmmc_drv_remove': rtsx_usb_sdmmc.c:(.text+0x2a018e): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `rtsx_usb_sdmmc_drv_probe': rtsx_usb_sdmmc.c:(.text+0x2a197e): undefined reference to `led_classdev_register' Fix by excluding such condition when defining macro RTSX_USB_USE_LEDS_CLASS. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mxs: fix card detection function for broken card detectDaniel Willmann1-0/+7
Return -ENOSYS in get_cd if broken-cd is specified in the device tree. Commit a91fe279ae75 (mmc: mxs: use standard flag for broken card detection) sets MMC_CAP_NEEDS_POLL when broken-cd is specified. This driver sets this flag unconditionally as it does not support a card detect interrupt. Instead, broken-cd means that there is no card detect signal connected. The mmc core checks the get_cd function return value to determine if a card is present. Only for a non-zero return value it will attempt to initialize the card. So retuning -ENOSYS will allow the card to be initialized. For comparison, mmc_gpio_get_cd in slot-gpio.c also returns -ENOSYS if the card detect GPIO is not valid. Signed-off-by: Daniel Willmann <daniel@totalueberwachung.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: jz4740: don't wait for PRG_DONE after stop command with R1 responseAlex Smith1-4/+7
As of commit bcc3e1726d ("mmc: block: Use R1 responses for stop cmds for read requests"), stop commands for reads do not have MMC_RSP_BUSY set. In this case we should not wait for a PRG_DONE IRQ after sending the stop command: it will not get raised when the busy flag is not set, causing the request to fail with a timeout. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Chris Ball <chris@printf.net> Cc: James Hogan <james.hogan@imgtec.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mvsdio: workaround for spurious irqsSebastian Hesselbarth1-0/+14
SDIO controllers found on Marvell Kirkwood SoCs seem to cause a late, spurious irq although all interrupts have been disabled. This irq doesn't do any harm, neither to HW nor driver. To avoid some "unexpected irq" warning later, we workaround above issue by bailing out of irq handler early, if we didn't expect any. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mvsdio: silence card detect noticeSebastian Hesselbarth1-3/+3
mvsdio reports method of card detection with dev_notice, while for removable cards it may be sane, for non-removable cards it is not. Also, as the user cannot do anything about it, silence the message by reducing it from dev_notice to dev_dbg. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: moxart: Add MOXA ART SD/MMC driverJonas Jensen3-0/+740
Add SD/MMC driver for MOXA ART SoCs. The "MOXA ART MMC controller" is likely a faraday "ftsdc010", a controller with support in U-Boot: http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/ftsdc010_mci.c Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: Add realtek USB sdmmc host driverRoger Tseng3-0/+1463
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek USB card reader MFD driver. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: sdhci-s3c: Remove unused define for NUM_GPIOSAxel Lin1-3/+0
NUM_GPIOS is not used after e19499ae10903 ("mmc: sdhci-s3c: let device core setup the default pin configuration"). Thus remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: restore the card-present checking pointJaehoon Chung1-0/+5
Restore the card-present checking point. (The following part was removed from commit bf626e5 ("mmc: dw_mmc: use slot-gpio to handle cd pin") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: remove dw_mci_of_cd_gpio/wp_gpio()Jaehoon Chung2-59/+3
If mmc_of_parse() is used, dw_mci_of_get_cd_gpio/wp_gpio didn't need. Already implemented into mmc_of_parse(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: remove unnecessary function.Jaehoon Chung1-7/+1
Remove unnecessary function. This function didn't re-use anywhere. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: fix minor coding style.Jaehoon Chung1-3/+2
Fixed an indentation block. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: remove unused member variable.Jaehoon Chung1-30/+3
Since using the device-tree, didn't use the callback pointer. So removed the unused callback pointer. When the set_power callback is used, it should be added in future. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: replace the bus_hz checking pointJaehoon Chung1-10/+8
It's right to check immediately whether host->bus_hz is assigned or not. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: use the mmc_of_parse() instead of local parserJaehoon Chung1-48/+1
mmc_of_parse() have been already parsed the general capability. Didn't need to use the local parser. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mxcmmc: Convert to SIMPLE_DEV_PM_OPSAlexander Shiyan1-10/+3
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mxcmmc: Convert to devm-* APIAlexander Shiyan1-63/+38
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: exynos: Staticize dw_mci_exynos_pmopsSachin Kamat1-1/+1
'dw_mci_exynos_pmops' is local to this file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mmci: Enforce mmc capabilities through DTUlf Hansson1-2/+0
Remove the option to provide the flags for mmc capabilities as platform data, enforce it through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Enforce DT for signal direction and feedback clockUlf Hansson2-20/+25
Remove the option to provide signal direction configuration and feeback clock as platform data, enforce it through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Enable MMC_CAP_CMD23Ulf Hansson1-0/+3
This is pure software configuration, which mmci has been supporting for a while. Let's enable it as default so we can take benefit from it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Use the common mmc DT parserUlf Hansson1-59/+33
Let mmci DT parser only handle the specific bindings related to mmci and extend the DT support by converting to the common mmc DT parser. While both DT and platform data exist, DT takes precedence. If there are supplied DT data, the card detect and write protect GPIOS are enforced to be provided through it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Add DT bindings for feedback clock pinUlf Hansson1-0/+2
The ST Micro variant supports the option of using a feedback clock signal in favor of the clockout pin when latching incoming signals on the data bus. Since this is matter of how pins are being routed we need to provide a new DT binding to be able to configure this through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-12mmc: mmci: Add DT bindings for signal directionUlf Hansson1-0/+11
Some variants have support for indicating the bus signal directions, which currently are configured through platform data. Add corresponding DT bindings to enable us to move away from using the platform data. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-12mmc: mmci: Convert to devm functionsUlf Hansson1-35/+17
Converting to devm functions to simplify error handling in ->probe() and to cleanup ->remove(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Convert to the mmc gpio APIUlf Hansson2-85/+15
To avoid duplication of code while handling card detect and write protect GPIO pins/irqs, let's convert to use the mmc gpio API. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Put the device into low power state at system suspendUlf Hansson1-31/+2
For CONFIG_PM_SLEEP, the device were always left in full power state after system suspend. We solely relied on a power domain to put it into low power state, which is an unreasonable requirement to put on SOCs to implement. Especially for those SOCs not supporting power domains at all. Use pm_runtime_force_suspend|resume() as the system suspend callbacks, to resolve the issue. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Let runtime PM callbacks be available for CONFIG_PMUlf Hansson1-2/+2
Convert to the SET_PM_RUNTIME_PM macro while defining the runtime PM callbacks. This means the callbacks becomes available for both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME, which is needed to handle the combinations of these scenarios. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Mask IRQs for all variants during runtime suspendUlf Hansson1-12/+11
In runtime suspended state, we are not expecting IRQs and thus we can safely mask them, not only for pwrreg_nopower variants but for all. Obviously we then also need to make sure we restore the IRQ mask while becoming runtime resumed. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-08mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"Micky Ching1-348/+66
This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-28mmc: Add realtek USB sdmmc host driverRoger Tseng3-0/+1463
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek USB card reader MFD driver. Signed-off-by: Roger Tseng <rogerable@realtek.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-22mmc: rtsx: add R1-no-CRC mmc command type handleMicky Ching1-0/+3
a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced a cmd.flags unhandled in realtek pci host driver. This will make MMC card fail to initialize, this patch is used to handle the new cmd.flags condition and MMC card can be used. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: sdhci: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon1-1/+3
Added MMC_DDR52 as eMMC's DDR mode is distinguished from SD-UHS. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: dw_mmc: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon2-4/+3
Replaced UHS_DDR50 with MMC_DDR52. And MMC_CAP_UHS_DDR50 is removed because of non-implementation of UHS signaling. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.