aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-13mmc: core: Invent MMC_CAP_3_3V_DDRUlf Hansson1-4/+7
According the JEDEC specification an eMMC card supporting 1.8V vccq in DDR mode should also be capable of 3.3V. However, it's been reported that some mmc hosts supports 3.3V, but not 1.8V. Currently the mmc core implements an error handling when the host fails to set 1.8V for vccq, by falling back to 3.3V. Unfortunate, this seems to be insufficient for some mmc hosts. To enable these to use eMMC DDR mode let's invent a new mmc cap, MMC_CAP_3_3V_DDR, which tells whether they support the eMMC 3.3V DDR mode. In case MMC_CAP_3_3V_DDR is set, but not MMC_CAP_1_8V_DDR, let's change to remain on the 3.3V, as it's the default voltage level for vccq, set by the earlier power up sequence. As this change introduces MMC_CAP_3_3V_DDR, let's take the opportunity to do some re-formatting of the related defines in the header file. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: core: Rename __mmc_set_signal_voltage() to mmc_set_signal_voltage()Ulf Hansson3-14/+14
Earlier the mmc_set_signal_voltage() existed, but since it has been renamed to mmc_set_uhs_voltage(), we can now use that name instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: core: Clarify usage of mmc_set_signal_voltage()Ulf Hansson4-7/+5
The mmc_set_signal_voltage() function is used for SD/SDIO when switching to 1.8V for UHS mode. To clarify this let's do the following changes. - We are always providing MMC_SIGNAL_VOLTAGE_180 as the signal_voltage parameter to the function. Then, let's just remove the parameter as it serves no purpose. - Rename the function to mmc_set_uhs_voltage(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: core: Remove redundant code in mmc_set_signal_voltage()Ulf Hansson1-7/+0
The mmc_set_signal_voltage() function is used for SD/SDIO when switching to 1.8V for UHS mode. Therefore let's remove the redundant code dealing with MMC_SIGNAL_VOLTAGE_330. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-02-13mmc: sh_mobile_sdhi: add support for 2 clocksChris Brandt1-0/+23
Some controllers have 2 clock sources instead of 1. The 2nd clock is for the internal card detect logic and must be enabled/disabled along with the main core clock for proper operation. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-02-13mmc: meson: cleanup stray debug messagesKevin Hilman1-3/+4
Cleanup some debug prints that cause needless noise during normal usage. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: stop passing around pointless return valuesLinus Walleij2-25/+15
The mmc_blk_issue_rq() function is called in exactly one place in queue.c and there the return value is ignored. So the functions called from that function that also meticulously return 0/1 do so for no good reason. Error reporting on the asynchronous requests are done upward to the block layer when the requests are eventually completed or fail, which may happen during the flow of the mmc_blk_issue_* functions directly (for "special commands") or later, when an asynchronous read/write request is completed. The issuing functions do not give rise to errors on their own, and there is nothing to return back to the caller in queue.c. Drop all return values and make the function return void. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: introduce new_areq and old_areqLinus Walleij1-6/+8
Recycling the same variable in an x=x+1 fashion may seem clever here but it makes the code terse and hard to follow for humans. Introduce a new_areq and old_areq variable so we see what is going on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: inline command abortionsLinus Walleij1-5/+13
Setting rqc to NULL followed by a goto to cmd_abort is just a way to do unconditional abort without starting any new command. Inline the calls to mmc_blk_rw_cmd_abort() and return immediately in those cases. Add some comments to the code flow so it is clear that this is where the asynchronous requests come back in and the result of them gets handled. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: do not assign mq_rq when aborting commandLinus Walleij1-1/+0
The code in mmc_blk_issue_rq_rq() aborts a command if the request is not properly aligned on large sectors. As part of the path jumping out, it assigns the local variable mq_rq reflecting a MMC queue request to the current MMC queue request, which is confusing since the variable is not used after this jump. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: break out mmc_blk_rw_start_new()Linus Walleij1-10/+17
As a step toward breaking apart the very complex function mmc_blk_issue_rw_rq() we break out the code to start a new request. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: break out mmc_blk_rw_cmd_abort()Linus Walleij1-5/+12
As a first step toward breaking apart the very complex function mmc_blk_issue_rw_rq() we break out the command abort code. This code assumes "ret" is != 0 and then repeatedly hammers blk_end_request() until the request to the block layer to end the request succeeds. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-s3c: use the bitops API for bit operationJaehoon Chung1-20/+21
Use the bitops API instead of shifting directly. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-s3c: remove the sdhci-s3c-regs header fileJaehoon Chung2-88/+69
Remove the sdhci-s3c-regs.h file. Instead, it located those defined values into sdhci-s3c.c. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: tmio: discard obsolete SDIO irqs before enabling irqsWolfram Sang2-2/+13
Before enabling SDIO irqs, clear the status bit, so we discard old and stale interrupts. Needed to get two wireless cards working. Use the newly introduced macro in all places. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: tmio: SDIO_STATUS_QUIRK is rather SDIO_STATUS_SETBITSWolfram Sang2-5/+3
QUIRK sounds like there is something wrong, but actually there are just some bits which need to be 1. Rename it to be more clear. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: tmio: refactor calls to sdio irqWolfram Sang1-3/+2
tmio_mmc_sdio_irq() is not used as a seperate irq handler anymore, so we can make it similar to the other irq helper functions, namely: * only give the host as argument function which is what it really needs * prefix function name with __ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: pwrseq: add support for Marvell SD8787 chipMatt Ranostay3-0/+128
Allow power sequencing for the Marvell SD8787 Wifi/BT chip. This can be abstracted to other chipsets if needed in the future. Cc: Tony Lindgren <tony@atomide.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: tmio: disable clocks when unbindingWolfram Sang1-2/+9
Create a helper function to disable clocks and use it in remove(), too. Now, clk_summary in debugfs reports the clocks as disabled and unprepared after unbinding. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Provide enhanced_strobe mode feature supportRitesh Harjani1-9/+25
This provides enhanced_strobe mode feature support in sdhci-msm driver. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Make HS400 tuning follow as per recommeneded HW sequenceRitesh Harjani1-2/+14
During tuning execution for HS400 mode, HW sequence recommends to select MCLK_SEL/2(0x3) in VENDOR_SPEC & sdhc msm clock at GCC to be 400MHZ (nearest supported clk). Add this change in tuning sequence during HS400 tuning. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci: Clear SDHCI_HS400_TUNING flag after platform_execute_tuningRitesh Harjani1-2/+4
Clear SDHCI_HS400_TUNING flag after platform_execute_tuning so that platform_execute_tuning may use it if needed. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: configure CORE_CSR_CDC_DELAY_CFG to recommended valueSubhash Jadavani1-1/+1
Program CORE_CSR_CDC_DELAY_CFG for hardware recommended 1.25ns delay. We may see data CRC errors if it's programmed for any other delay value. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Reset vendor specific func register on probeVenkat Gopalakrishnan1-11/+4
The vendor specific func register doesn't get reset when using the software reset register. The various bootloader's could leave this in an unknown state, hence reset this register to it's power on reset value during probe. Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Factor out sdhci_msm_hs400Ritesh Harjani1-6/+26
Factor out sdhci_msm_hs400 used for DLL calibration in HS400 modes. This function will be needed for enhanced_strobe as well. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Factor out function to set/get msm clock rateRitesh Harjani1-24/+40
Factor out msm_set/get_clock_rate_for_bus_mode for it's later use in changing the tuning sequence for selecting HS400 bus speed mode. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Factor out sdhci_msm_hc_select_modeRitesh Harjani1-87/+114
This factors out sdhci_msm_hc_select_mode to later use it during enhanced_strobe mode select. It also further breaks sdhci_msm_hc_select_mode into separate functions for configuring HS400 mode or other modes. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Tested-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mxs-mmc: Implement CMD23 supportStefan Wahren1-4/+12
This patch implements support for multiblock transfers bounded by SET_BLOCK_COUNT (CMD23) on the MXS MMC host driver. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: wbsd: safer check if dma_addr is valid DMA addressAlexey Khoroshilov1-2/+5
host->dma_addr can store a value that is not returned by the DMA API, so it is safer to check if is a valid DMA address indirectly. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-acpi: support deferred probeZhang Rui1-1/+4
With commit 67bf5156edc4 ("gpio / ACPI: fix returned error from acpi_dev_gpio_irq_get()"), mmc_gpiod_request_cd() returns -EPROBE_DEFER if GPIO is not ready when sdhci-acpi driver is probed, and sdhci-acpi driver should be probed again later in this case. This fixes an order issue when both GPIO and sdhci-acpi drivers are built as modules. CC: stable@vger.kernel.org # v4.9 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177101 Tested-by: Jonas Aaberg <cja@gmx.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: Move public functions from host.h to private headersUlf Hansson7-1/+54
A significant amount of functions are available through the public mmc host.h header file. Let's slim down this public mmc interface, as to prevent users from abusing it, by moving some of the functions to private mmc host.h header file. This change concentrates on moving the functions into private mmc headers, following changes may continue with additional clean-ups. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-02-13mmc: core: Move public functions from card.h to private headersUlf Hansson15-2/+263
A significant amount of functions and other definitions are available through the public mmc card.h header file. Let's slim down this public mmc interface, as to prevent users from abusing it, by moving some of the functions/definitions to private mmc header files. This change concentrates on moving the functions into private mmc headers, following changes may continue with additional clean-ups. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-02-13mmc: vub300: Don't use mmc_card_present() when validating for inserted cardUlf Hansson1-4/+2
The mmc_card_present() function helps the mmc core to track an internal state of the card device. More importantly, it's not intended to be used by mmc host drivers to check for an inserted card. Therefore, let's stop using it and instead rely on checking for a valid pointer to a struct mmc_card, as it should be good enough. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13mmc: omap: Don't use mmc_card_present() when validating for inserted cardUlf Hansson1-1/+1
The mmc_card_present() function helps the mmc core to track an internal state of the card device. More importantly, it's not intended to be used by mmc host drivers to check for an inserted card. Therefore, let's stop using it and instead rely on checking for a valid pointer to a struct mmc_card, as it should be good enough. Cc: linux-omap@vger.kernel.org Cc: Tony Lindgren <tony@atomide.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13mmc: core: Move public functions from core.h to private headersUlf Hansson9-1/+58
A significant amount of functions are available through the public mmc core.h header file. Let's slim down this public mmc interface, as to prevent users from abusing it, by moving some of the functions to private mmc header files. This change concentrates on moving the functions into private mmc headers, following changes may continue with additional clean-ups, as an example some functions can be turned into static. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-02-13mmc: core: First step in cleaning up private mmc header filesUlf Hansson13-4/+54
This is the first step in cleaning up the private mmc header files. In this change we makes sure each header file builds standalone, as that helps to resolve dependencies. While changing this, it also seems reasonable to stop including other headers from inside a header itself which it don't depend upon. Additionally, in some cases such dependencies are better resolved by forward declaring the needed struct. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-02-13mmc: s3cmci: include linux/interrupt.h for tasklet_structArnd Bergmann1-0/+1
I got this new build error on today's linux-next drivers/mmc/host/s3cmci.h:69:24: error: field 'pio_tasklet' has incomplete type struct tasklet_struct pio_tasklet; drivers/mmc/host/s3cmci.c: In function 's3cmci_enable_irq': drivers/mmc/host/s3cmci.c:390:4: error: implicit declaration of function 'enable_irq';did you mean 'enable_imask'? [-Werror=implicit-function-declaration] While I haven't found out why this happened now and not earlier, the solution is obvious, we should include the header that defines the structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: tmio: Remove redundant check of mmc->slot.cd_irqUlf Hansson1-2/+1
To validate whether native hotplug needs to be used, the tmio driver checks whether the mmc->slot.cd_irq has been successfully assigned. This check is redundant at its current place in tmio_mmc_host_probe(), as the mmc core assigns mmc->slot.cd_irq a valid value first when mmc_gpiod_request_cd_irq() is called. Therefore, let's just remove the check for now, as that also removes a layering violation of the tmio driver accessing core specific data via ->slot.cd_irq. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-02-13mmc: sdhci-of-esdhc: avoid clock glitch when frequency is changingyangbo lu2-3/+23
The eSDHC_PRSSTAT[SDSTB] bit indicates whether the internal card clock is stable. This bit is for the host driver to poll clock status when changing the clock frequency. It is recommended to clear eSDHC_SYSCTL[SDCLKEN] to remove glitch on the card clock when the frequency is changing. This patch is to disable SDCLKEN bit before changing frequency and enable it after SDSTB bit is set. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-pci: Add support for HS200 tuning mode on AMD, eMMC-4.5.1Shyam Sundar S K1-3/+91
This patch adds support for HS200 tuning mode on AMD eMMC-4.5.1 Reviewed-by: Sen, Pankaj <Pankaj.Sen@amd.com> Reviewed-by: Shah, Nehal-bakulchandra <Nehal-bakulchandra.Shah@amd.com> Reviewed-by: Agrawal, Nitesh-kumar <Nitesh-kumar.Agrawal@amd.com> Signed-off-by: S-k, Shyam-sundar <Shyam-sundar.S-k@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: vub300: Remove bogus check of irqs_queuedShawn Lin1-2/+0
It's unnecessary to check the irqs_queued value as it always needs to queue one if irq isn't enabled. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdio: don't use rocr to check if the card could support UHS modeShawn Lin1-7/+17
Per SDIO Simplified Specification V3, section 3.1.2, A host that supports UHS-I sets S18R to 1 in the argument of CMD5 to request a change of the signal voltage to 1.8V. If the card supports UHS-I and the current signal voltage is 3.3V, S18A is set to 1 in the R4 response. If the signal voltage is already 1.8V, the card sets S18A to 0 so that host maintains the current signal voltage. UHS-I is supported in SD mode and S18A is always 0 in SPI mode. For the current code, if the signaling voltage is fixed 1.8v, so the card will set S18A to 0 for rocr and thus we would clear the R4_18V_PRESENT from ocr, which make core won't try to use uhs mode. To fix it, we expect sdio_read_cccr would fail if the uhs mode won't work at all. Note that it's interesting that some sdio cards still response S18A even the voltage is fixed to 1.8v and the CMD11 will also accepted and finish enabling UHS mode successfully. I guess this is why folks didn't notice this problem. Anyway, fix it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdio: Factor out retry init card helper functionShawn Lin1-4/+10
Add new helper function, mmc_sdio_resend_if_cond, to be reused when trying to retry the init sequence. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: Use kmalloc_array() in mmc_alloc_sg()Markus Elfring1-1/+1
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mmc_test: Use kcalloc() in mmc_test_alloc_mem()Markus Elfring1-2/+1
* The script "checkpatch.pl" pointed information out like the following. WARNING: Prefer kcalloc over kzalloc with multiply Thus fix the affected source code place. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mmc_test: Improve a size determination in five functionsMarkus Elfring1-6/+5
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mmc_test: Combine substrings for 5 messagesMarkus Elfring1-10/+5
The script "checkpatch.pl" pointed information out like the following. WARNING: quoted string split across lines Thus fix affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mmc_test: Add some spaces for better code readabilityMarkus Elfring1-21/+21
Use space characters at some source code places according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mmc_test: Use seq_puts() in mtf_testlist_show()Markus Elfring1-1/+1
The script "checkpatch.pl" pointed information out like the following. WARNING: Prefer seq_puts to seq_printf Thus fix the affected source code place. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mmc_test: Fix a typo in a comment lineMarkus Elfring1-1/+1
Add a missing character in the function description. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.