aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices/docg3.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-01-09mtd: docg3: add ECC correction codeRobert Jarzmik1-22/+94
Credit for discovering the BCH algorith parameters, and bit reversing algorithm is to be give to Mike Dunn and Ivan Djelic. The BCH correction code relied upon the BCH library, where all data and ECC is bit-reversed. The BCH library works correctly when each input byte is bit-reversed, and accordingly ECC output is also bit-reversed. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: map erase and write functionsRobert Jarzmik1-10/+4
Map the developped write and erase functions into the mtd structure. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add erase functionsRobert Jarzmik1-0/+90
Add erase capability to the docg3 driver. The erase block is made of 2 physical blocks, as both share all 64 pages. That makes an erase block of at least 64 kBytes. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add write functionsRobert Jarzmik1-12/+541
Add write capability to the docg3 driver. The writes are possible on a single page (512 bytes + 16 bytes), even if that page is split on 2 physical pages on 2 blocks (each on one plane). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add OOB layout to mtdinfoRobert Jarzmik1-0/+15
Add OOB layout description for docg3, so that userspace can use this information to setup the data for write_oob(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add multiple floor supportRobert Jarzmik1-56/+125
Add support for multiple floors, ie. cascaded docg3 chips. There might be 4 docg3 chips cascaded, sharing the same address space, and providing up to 4 times the storage capacity of a unique chip. Each floor will be seen as an independant mtd device. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix reading oob+data without correctionRobert Jarzmik1-99/+95
Fix the docg3 reads to be able to cope with all possible data buffer / oob buffer / file mode combinations from docg3_read_oob(). This especially ensures that raw reads do not use ECC corrections, and AUTOOOB and PLACEOOB do use ECC correction. The approach is to empty docg3_read() and make it a wrapper to docg3_read_oob(). As docg3_read_oob() handles all the funny cases (no data buffer but oob buffer, data buffer but no oob buffer, ...), docg3_read() is just a special use of docg3_read_oob(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix protection areas readingRobert Jarzmik1-7/+9
The protection areas boundaries were on 16bit registers, not 8bit. This is consistent with block numbers, which can extend up to 4096 on bigger chips (and is 2048 on the docg3). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix tracing of IO in writebRobert Jarzmik1-1/+1
Writeb was incorrectly traced as a 16 bits write, instead of a 8 bits write. Fix it by tracing the correct width. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix debug log verbosityRobert Jarzmik1-1/+1
Change the NOP debug log verbosity to very verbose to unburden log analysis. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-10-14mtd: Add DiskOnChip G3 supportRobert Jarzmik1-0/+1114
Add support for DiskOnChip G3 chips. The support is quite limited yet : - no flash writes/erases are implemented - ECC fixes are not implemented - powerdown is not implemented - IPL handling is not yet done On the brighter side, the chip reading does work. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.