aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-04Merge tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds3-1234/+0
Pull spi updates from Mark Brown: "A fairly quiet release for SPI, the biggest thing is the conversion to use GPIO descriptors which is now 90% done but still needs some stragglers converting. Summary: - Support for inter-word delays - Conversion of the core and most drivers to use GPIO descriptors for GPIO controlled chip selects - New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum" * tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits) spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3 spi: sifive: Remove redundant dev_err call in sifive_spi_probe() spi: sifive: Remove spi_master_put in sifive_spi_remove() spi: spi-gpio: fix SPI_CS_HIGH capability spi: pxa2xx: Setup maximum supported DMA transfer length spi: sifive: Add driver for the SiFive SPI controller spi: sifive: Add DT documentation for SiFive SPI controller spi: sprd: Add a prefix for SPI DMA channel macros spi: sprd: spi: sprd: Add DMA mode support dt-bindings: spi: Add the DMA properties for the SPI dma mode spi: sprd: Add the SPI irq function for the SPI DMA mode dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO spi: gpio: Advertise support for SPI_CS_HIGH spi: sh-msiof: Replace spi_master by spi_controller spi: sh-hspi: Replace spi_master by spi_controller spi: rspi: Replace spi_master by spi_controller spi: atmel-quadspi: add support for sam9x60 qspi controller dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 spi: atmel-quadspi: add support for named peripheral clock ...
2019-03-04Merge tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtdLinus Torvalds34-653/+4383
Pull MTD updates from Boris Brezillon: "Core MTD changes: - Use struct_size() where appropriate - mtd_{read,write}() as wrappers around mtd_{read,write}_oob() - Fix misuse of PTR_ERR() in docg3 - Coding style improvements in mtdcore.c SPI NOR changes: Core changes: - Add support of octal mode I/O transfer - Add a bunch of SPI NOR entries to the flash_info table SPI NOR controller driver changes: - cadence-quadspi: * Add support for Octal SPI controller * write upto 8-bytes data in STIG mode - mtk-quadspi: * rename config to a common one * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask - Add Tudor as SPI-NOR co-maintainer NAND changes: NAND core changes: - Fourth batch of fixes/cleanup to the raw NAND core impacting various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2). - Check the return code of nand_reset() and nand_readid_op(). - Remove ->legacy.erase and single_erase(). - Simplify the locking. - Several implicit fall through annotations. Raw NAND controllers drivers changes: - Fix various possible object reference leaks (MTK, JZ4780, Atmel) - ST: * Add support for STM32 FMC2 NAND flash controller - Meson: * Add support for Amlogic NAND flash controller - Denali: * Several cleanup patches - Sunxi: * Several cleanup patches - FSMC: * Disable NAND on remove() * Reset NAND timings on resume() SPI-NAND drivers changes: - Toshiba: * Add support for all Toshiba products. - Macronix: * Fix ECC status read. - Gigadevice: * Add support for GD5F1GQ4UExxG" * tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd: (64 commits) mtd: spi-nor: Fix wrong abbreviation HWCPAS mtd: spi-nor: cadence-quadspi: fix spelling mistake: "Couldnt't" -> "Couldn't" mtd: spi-nor: Add support for en25qh64 mtd: spi-nor: Add support for MX25V8035F mtd: spi-nor: Add support for EN25Q80A mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC mtd: spi-nor: split s25fl128s into s25fl128s0 and s25fl128s1 mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode mtd: spi-nor: Add support for mx25u3235f mtd: rawnand: denali_dt: remove single anonymous clock support mtd: rawnand: mtk: fix possible object reference leak mtd: rawnand: jz4780: fix possible object reference leak mtd: rawnand: atmel: fix possible object reference leak mtd: rawnand: fsmc: Disable NAND on remove() mtd: rawnand: fsmc: Reset NAND timings on resume() mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG mtd: rawnand: denali: remove unused dma_addr field from denali_nand_info mtd: rawnand: denali: remove unused function argument 'raw' mtd: rawnand: denali: remove unneeded denali_reset_irq() call ...
2019-03-04Merge branch 'spi-5.1' into spi-nextMark Brown3-1234/+0
2019-02-25Merge tag 'nand/for-5.1' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon22-553/+4243
NAND core changes: - Fourth batch of fixes/cleanup to the raw NAND core impacting various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2). - Checking the return code of nand_reset() and nand_readid_op(). - Removing ->legacy.erase and single_erase(). - Simplifying the locking. - Several implicit fall through annotations. Raw NAND controllers drivers changes: - Fixing various possible object reference leaks (MTK, JZ4780, Atmel). - ST: * Adding support for STM32 FMC2 NAND flash controller. - Meson: * Adding support for Amlogic NAND flash controller. - Denali: * Several cleanup patches. - Sunxi: * Several cleanup patches. - FSMC: * Disabling NAND on remove(). * Resetting NAND timings on resume(). SPI-NAND drivers changes: - Toshiba: * Adding support for all Toshiba products. - Macronix: * Fixing ECC status read. - Gigadevice: * Adding support for GD5F1GQ4UExxG.
2019-02-25Merge tag 'spi-nor/for-5.1' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon6-31/+108
SPI NOR Changes Core changes: - Add support of octal mode I/O transfer - Add a bunch of SPI NOR entries to the flash_info table SPI NOR controller driver changes: - cadence-quadspi: * Add support for Octal SPI controller * write upto 8-bytes data in STIG mode - mtk-quadspi: * rename config to a common one * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask MAINTAINERS: - Add Tudor as SPI-NOR co-maintainer
2019-02-21mtd: spi-nor: cadence-quadspi: fix spelling mistake: "Couldnt't" -> "Couldn't"Colin Ian King1-1/+1
There is a spelling mistake in a dev_error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-21mtd: spi-nor: Add support for en25qh64Roger Pueyo Centelles1-0/+2
The Eon EN25QH64 is a 64 Mbit SPI NOR flash memory chip found on recent wireless routers. Its 32, 128 and 256 Mbit siblings are already supported. Tested on a COMFAST CF-E120A v3 router board. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-21mtd: spi-nor: Add support for MX25V8035FFrieder Schrempf1-0/+2
This adds support for the Macronix MX25V8035F, a 8Mb SPI NOR chip. It is used on i.MX6UL/ULL SoMs by Kontron Electronics GmbH (N631x). It was only tested with a single data line connected, by writing and reading random data with dd. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-21mtd: spi-nor: Add support for EN25Q80AFrieder Schrempf1-0/+2
This adds support for the EON EN25Q80A, a 8Mb SPI NOR chip. It is used on i.MX6 boards by Kontron Electronics GmbH (N60xx, N61xx). It was only tested with a single data line connected, by writing and reading random data with dd. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-13mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controllerVignesh R1-12/+47
Cadence OSPI controller IP supports Octal IO (x8 IO lines), It also has an integrated PHY. IP register layout is very similar to existing QSPI IP except for additional bits to support Octal and Octal DDR mode. Therefore, extend current driver to support Octal mode. Only Octal SDR read (1-1-8)mode is supported for now. Tested with mt35xu512aba Octal flash on TI's AM654 EVM. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-13mtd: spi-nor: split s25fl128s into s25fl128s0 and s25fl128s1Ahmet Celenk1-1/+4
Due to two different versions (S25FL128SAGBHI200 and S25FL128SAGBHI210) of the s25fl128s qspi memory, the single "s25fl128s" device entry must be split into two to match the correct JEDEC ID's for each version. Solves paging related issues of S25FL128SAGBHI210 chips. Signed-off-by: Ahmet Celenk <ahmet.celenk@procenne.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-13mtd: powernv_flash: Fix device registration errorAneesh Kumar K.V1-1/+1
This change helps me to get multiple mtd device registered. Without this I get sysfs: cannot create duplicate filename '/bus/nvmem/devices/flash0' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2-00557-g1ef20ef21f22 #13 Call Trace: [c0000000b38e3220] [c000000000b58fe4] dump_stack+0xe8/0x164 (unreliable) [c0000000b38e3270] [c0000000004cf074] sysfs_warn_dup+0x84/0xb0 [c0000000b38e32f0] [c0000000004cf6c4] sysfs_do_create_link_sd.isra.0+0x114/0x150 [c0000000b38e3340] [c000000000726a84] bus_add_device+0x94/0x1e0 [c0000000b38e33c0] [c0000000007218f0] device_add+0x4d0/0x830 [c0000000b38e3480] [c0000000009d54a8] nvmem_register.part.2+0x1c8/0xb30 [c0000000b38e3560] [c000000000834530] mtd_nvmem_add+0x90/0x120 [c0000000b38e3650] [c000000000835bc8] add_mtd_device+0x198/0x4e0 [c0000000b38e36f0] [c00000000083619c] mtd_device_parse_register+0x11c/0x280 [c0000000b38e3780] [c000000000840830] powernv_flash_probe+0x180/0x250 [c0000000b38e3820] [c00000000072c120] platform_drv_probe+0x60/0xf0 [c0000000b38e38a0] [c0000000007283c8] really_probe+0x138/0x4d0 [c0000000b38e3930] [c000000000728acc] driver_probe_device+0x13c/0x1b0 [c0000000b38e39b0] [c000000000728c7c] __driver_attach+0x13c/0x1c0 [c0000000b38e3a30] [c000000000725130] bus_for_each_dev+0xa0/0x120 [c0000000b38e3a90] [c000000000727b2c] driver_attach+0x2c/0x40 [c0000000b38e3ab0] [c0000000007270f8] bus_add_driver+0x228/0x360 [c0000000b38e3b40] [c00000000072a2e0] driver_register+0x90/0x1a0 [c0000000b38e3bb0] [c00000000072c020] __platform_driver_register+0x50/0x70 [c0000000b38e3bd0] [c00000000105c984] powernv_flash_driver_init+0x24/0x38 [c0000000b38e3bf0] [c000000000010904] do_one_initcall+0x84/0x464 [c0000000b38e3cd0] [c000000001004548] kernel_init_freeable+0x530/0x634 [c0000000b38e3db0] [c000000000011154] kernel_init+0x1c/0x168 [c0000000b38e3e20] [c00000000000bed4] ret_from_kernel_thread+0x5c/0x68 mtd mtd1: Failed to register NVMEM device With the change we now have root@(none):/sys/bus/nvmem/devices# ls -al total 0 drwxr-xr-x 2 root root 0 Feb 6 20:49 . drwxr-xr-x 4 root root 0 Feb 6 20:49 .. lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@0 -> ../../../devices/platform/ibm,opal:flash@0/mtd/mtd0/flash@0 lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@1 -> ../../../devices/platform/ibm,opal:flash@1/mtd/mtd1/flash@1 Fixes: 1cbb4a1c433a ("mtd: powernv: Add powernv flash MTD abstraction driver") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-13mtd: Use mtd->name when registering nvmem deviceAneesh Kumar K.V1-0/+1
With this patch, we use the mtd->name instead of concatenating the name with '0'. Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-10mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG modePurna Chandra Mandal1-3/+12
cadence-quadspi controller allows upto eight bytes of data to be written in software Triggered Instruction generator (STIG) mode of operation. Lower 4 bytes are written through writedatalower and upper 4 bytes by writedataupper register. This patch allows all the 8 bytes to be written. Signed-off-by: Purna Chandra Mandal <purna.chandra.mandal@intel.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-10mtd: spi-nor: Add support for mx25u3235fAndré Valentin1-0/+2
The mx25u3235f is found on the ZyXEL NBG6817 router, therefore add driver support for it so that we can upstream board support. Minimal tested with u-boot tools fw_printenv/fw_setenv on GlobalScale ESPRESSObin v5 board. Signed-off-by: André Valentin <avalentin@marcant.net> [miyatsu@qq.com: Remove unnecessary white space.] Signed-off-by: Ding Tao <miyatsu@qq.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-07mtd: rawnand: denali_dt: remove single anonymous clock supportMasahiro Yamada1-23/+4
Commit 6f1fe97bec34 ("mtd: rawnand: denali_dt: add more clocks based on IP datasheet") introduced a more correct binding that requires three named clocks. Now that all upstream DT files migrated over to it, remove the single anonymous clock support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-07mtd: rawnand: mtk: fix possible object reference leakWen Yang1-2/+6
of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device, there is no need to call get_device() twice. We also should make sure to drop the reference to the device taken by of_find_device_by_node() on driver unbind. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Wen Yang <yellowriver2010@hotmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-07mtd: rawnand: jz4780: fix possible object reference leakWen Yang1-3/+6
of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device, there is no need to call get_device() twice. We also should make sure to drop the reference to the device taken by of_find_device_by_node() on driver unbind. Fixes: ae02ab00aa3c ("mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs") Signed-off-by: Wen Yang <yellowriver2010@hotmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-07mtd: rawnand: atmel: fix possible object reference leakWen Yang1-6/+15
of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device, there is no need to call get_device() twice. We also should make sure to drop the reference to the device taken by of_find_device_by_node() on driver unbind. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Wen Yang <yellowriver2010@hotmail.com> Suggested-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-mtd@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06mtd: rawnand: gpmi: fix MX28 bus master lockup problemMartin Kepplinger1-7/+6
Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft reset may cause bus master lock up") for MX28 too. It has the same problem. Observed problem: once per 100,000+ MX28 reboots NAND read failed on DMA timeout errors: [ 1.770823] UBI: attaching mtd3 to ubi0 [ 2.768088] gpmi_nand: DMA timeout, last DMA :1 [ 3.958087] gpmi_nand: BCH timeout, last DMA :1 [ 4.156033] gpmi_nand: Error in ECC-based read: -110 [ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64 bytes from PEB 0:0, read only 0 bytes, retry [ 4.171283] step 1 error [ 4.173846] gpmi_nand: Chip: 0, Error -1 Without BCH soft reset we successfully executed 1,000,000 MX28 reboots. I have a quote from NXP regarding this problem, from July 18th 2016: "As the i.MX23 and i.MX28 are of the same generation, they share many characteristics. Unfortunately, also the erratas may be shared. In case of the documented erratas and the workarounds, you can also apply the workaround solution of one device on the other one. This have been reported, but I’m afraid that there are not an estimated date for updating the Errata documents. Please accept our apologies for any inconveniences this may cause." Fixes: 6f2a6a52560a ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems") Cc: stable@vger.kernel.org Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-02-06mtd: Make sure mtd->erasesize is valid even if the partition is of size 0Boris Brezillon1-0/+4
Commit 33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent erase properties") introduced a check to make sure ->erasesize and ->_erase values are consistent with the MTD_NO_ERASE flag. This patch did not take the 0 bytes partition case into account which can happen when the defined partition is outside the flash device memory range. Fix that by setting the partition erasesize to the parent erasesize. Fixes: 33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent erase properties") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-05mtd: rawnand: fsmc: Disable NAND on remove()Linus Walleij1-0/+15
This disables the NAND on remove() and the errorpath, making sure the chipselect gets deasserted when the NAND is not in use. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: fsmc: Reset NAND timings on resume()Linus Walleij1-0/+1
When we go through a suspend/resume cycle the NAND timings and other settings may have been lost so reset the chip to bring it up in a known working state. The FSMC only supports single CS chips so we only need to call nand_reset(chip, 0). Cc: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxGStefan Roese1-0/+83
Add support for GigaDevice GD5F1GQ4UExxG SPI NAND chip. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chuanhong Guo <gch981213@gmail.com> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: denali: remove unused dma_addr field from denali_nand_infoMasahiro Yamada1-1/+0
This is a leftover of commit 997cde2a2220 ("mtd: nand: denali: skip driver internal bounce buffer when possible"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: denali: remove unused function argument 'raw'Masahiro Yamada1-9/+9
This argument is not used at all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: denali: remove unneeded denali_reset_irq() callMasahiro Yamada1-3/+0
This code was added by commit 26d266e10e5e ("mtd: nand: denali: fix raw and oob accessors for syndrome page layout"), but I do not see sensible reason. The IRQ flags are correctly reset by denali_cmd_ctrl(), so this code is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: check return code of nand_reset() and nand_readid_op()Masahiro Yamada1-4/+10
nand_scan_ident() iterates over maxchips to find as many homogeneous chips as possible. Since commit 2d472aba15ff ("mtd: nand: document the NAND controller/NAND chip DT representation"), new drivers should pass in the exact number of CS lines instead of possible max, but old platforms may still rely on nand_scan_ident() to detect the actual number of connected CS lines. In that case, this loop bails out when manufacturer or device ID unmatches. The reason of unmatch is most likely no chip is connected to that CS line. If so, nand_reset() should already have failed, and the following nand_readid_op() is pointless. Before ->exec_op hook was introduced, drivers had no way to tell the failure of NAND_CMD_RESET to the framework because the legacy ->cmdfunc() has void return type. Now drivers implementing ->exec_op hook can return the error code. You can save nand_readid_op() by checking the return value of nand_reset(). The return value of nand_readid_op() should be checked as well. If it fails, probably id[0] and id[1] are undefined values. Just for consistency, it should be sensible to check the return code in nand_do_write_oob() as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: remove ->legacy.erase and single_erase()Masahiro Yamada1-27/+4
Now that the last user of this hook, denali.c, stopped using it, we can remove the erase hook from nand_legacy. I squashed single_erase() because only the difference between single_erase() and nand_erase_op() is the number of bit shifts. The status/ret conversion in nand_erase_nand() is unneeded since commit eb94555e9e97 ("mtd: nand: use usual return values for the ->erase() hook"). Cleaned it up now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: denali: remove ->erase hookMasahiro Yamada1-21/+0
Commit f9ebd1bb4103 ("mtd: rawnand: Deprecate ->erase()") discouraged the use of this hook, so I am happy to follow the suggestion. Although the Denali IP provides a special MAP10 command for erasing, using it would not buy us much. The Denali IP actually works with the generic erasing by single_erase() + ->cmdfunc hook (nand_command_lp) + ->cmd_ctrl hook (denali_cmd_ctrl). This method is also deprecated, but denali_erase() can go away irrespective of ->exec_op conversion. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: Annotate implicit fall through in nand_scan_tailMathieu Malaterre1-0/+3
There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings (W=1). This commit removes the following warnings: drivers/mtd/nand/raw/nand_base.c:5556:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/mtd/nand/raw/nand_base.c:5575:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/mtd/nand/raw/nand_base.c:5613:13: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: Annotate implicit fall through in nand_command/nand_command_lpMathieu Malaterre1-1/+2
There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings (W=1). This commit removes the following warnings: drivers/mtd/nand/raw/nand_legacy.c:332:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/mtd/nand/raw/nand_legacy.c:483:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: spinand: Add support for all Toshiba Memory productsYoshio Furuyama1-14/+65
Add device table for Toshiba Memory products. Also, generalize OOB layout structure and function names. Signed-off-by: Yoshio Furuyama <tmcmc-mb-yfuruyama7@ml.toshiba.co.jp> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: meson: add support for Amlogic NAND flash controllerLiang Yang3-0/+1473
Add initial support for the Amlogic NAND flash controller which is available on Meson SoCs. Signed-off-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: Simplify the lockingBoris Brezillon1-66/+45
nand_get_device() was complex for apparently no good reason. Let's replace this locking scheme with 2 mutexes: one attached to the controller and another one attached to the chip. Every time the core calls nand_get_device(), it will first lock the chip and if the chip is not suspended, will then lock the controller. nand_release_device() will release both lock in the reverse order. nand_get_device() can sleep, just like the previous implementation, which means you should never call that from an atomic context. We also get rid of - the chip->state field, since all it was used for was flagging the chip as suspended. We replace it by a field called chip->suspended and directly set it from nand_suspend/resume() - the controller->wq and controller->active fields which are no longer needed since the new controller->lock (now a mutex) guarantees that all operations are serialized at the controller level - panic_nand_get_device() which would anyway be a no-op. Talking about panic write, I keep thinking the rawnand implementation is unsafe because there's not negotiation with the controller to know when it's actually done with it's previous operation. I don't intend to fix that here, but that's probably something we should look at, or maybe we should consider dropping the ->_panic_write() implementation Last important change to mention: we now return -EBUSY when someone tries to access a device that as been suspended, and propagate this error to the upper layer. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: Stop using chip->state in driversBoris Brezillon3-11/+5
We are about to simplify the locking in the rawnand framework, and part of this simplication is about getting rid of chip->state, so let's first patch drivers that check the state. All of them do that to get a timeout value based on the operation that is being executed. Since a timeout is, by definition, something that is here to prevent hanging on an event that might never happen, picking the maximum timeout value no matter the operation should be harmless. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: omap2: Use nand_controller_init()Boris Brezillon1-5/+8
Stop initializing omap_gpmc_controller fields are declaration time and replace that by a call to nand_controller_init(). Since the same object might be shared by several NAND chips and the NAND controller driver expects a ->probe() per-chip, we need to keep track of the omap_gpmc_controller state (whether it's already been initialized or not). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: tmio: Do not abuse nand_controller->wqBoris Brezillon1-8/+9
nand_controller->wq has never been meant to be used by NAND controller drivers. This waitqueue is used by the framework to serialize accesses to a NAND controller, and messing up with its state is a really bad idea. Declare a completion object in tmio_nand and use it to wait for RB transitions. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: mtk: Use nand_controller_init() instead of open-coding itBoris Brezillon1-2/+1
nand_controller_init() has been added to simplify nand_controller struct initialization. Use this function instead of duplicating the logic. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: marvell: use struct_size() in devm_kzalloc()Gustavo A. R. Silva1-3/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Handle the tREA > tRC / 2 caseBoris Brezillon1-3/+19
In non-EDO, tREA should be less than tRP to guarantee that the controller does not sample the IO lines too early. Unfortunately, the sunxi NAND controller does not allow us to have different values for tRP and tREH (tRP = tREH = tRW / 2). We have 2 options to overcome this limitation: 1/ Extend tRC to fulfil the tREA <= tRC / 2 constraint 2/ Use EDO mode (only works if timings->tRLOH > 0) Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: spinand: macronix: Fix ECC Status ReadEmil Lenngren1-1/+7
The datasheet specifies the upper four bits are reserved. Testing on real hardware shows that these bits can indeed be nonzero. Signed-off-by: Emil Lenngren <emil.lenngren@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Fix kernel doc headersBoris Brezillon1-30/+30
Fix the struct description and use standard kernel-doc header format (even if the file is not parsed by the doc generator). We also replace tabs by a single space. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Migrate to ->exec_op()Boris Brezillon1-120/+174
And get rif of all legacy hooks and unused fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Add an SPDX tagBoris Brezillon1-11/+2
Replace the license text by an SPDX tag and fix MODULE_LICENSE() to match GPL-2.0+. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Stop passing mtd_info objects aroundBoris Brezillon1-110/+94
Replace them by nand_chip pointers. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Name nand_chip objects consistentlyBoris Brezillon1-52/+51
nand_chip objects are sometimes called chip and sometimes nand. Rename all of them into nand to make things consistent. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Use struct_size()Boris Brezillon1-3/+1
Use struct_size() to calculate sunxi_nand object size. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: sunxi: Use a consistent name for sunxi_nand_chip objectsBoris Brezillon1-27/+29
sunxi_nand_chip objects are sometimes called chip and other times called sunxi_nand. Make that consistent and name all occurrences sunxi_nand. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: stm32_fmc2: add polling modeChristophe Kerello1-32/+297
This patch adds the polling mode, a basic mode that do not need any DMA channels. This mode is also useful for debug purpose. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.