aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds30-66/+88
Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook1-2/+3
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook5-7/+10
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook3-4/+4
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook13-19/+23
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook15-34/+48
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-3/+3
Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
2018-06-10Merge tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds8-24/+165
Pull UBI and UBIFS updates from Richard Weinberger: - the UBI on-disk format header file is now dual licensed - new way to detect Fastmap problems during runtime - bugfix for Fastmap - minor updates for UBIFS (spelling, comments, vm_fault_t, ...) * tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs: mtd: ubi: Update ubi-media.h to dual license ubi: fastmap: Detect EBA mismatches on-the-fly ubi: fastmap: Check each mapping only once ubi: fastmap: Correctly handle interrupted erasures in EBA ubi: fastmap: Cancel work upon detach ubifs: lpt: Fix wrong pnode number range in comment ubifs: gc: Fix typo ubifs: log: Some spelling fixes ubifs: Spelling fix someting -> something ubifs: journal: Remove wrong comment ubifs: remove set but never used variable ubifs, xattr: remove misguided quota flags fs: ubifs: Adding new return type vm_fault_t
2018-06-08Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtdLinus Torvalds36-519/+659
Pull MTD updates from Boris Brezillon: "Core changes: - Add a sysfs attribute to expose available OOB size Driver changes: - Remove HAS_DMA dependency on various drivers - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3 - Replace msleep by usleep_range() in the dataflash driver - Avoid VLA usage in nftl layers - Remove useless .owner assignment in pismo - Fix various issues in the CFI driver - Improve TRX partition handling expose a DT compat for this part parser - Clarify OFFSET_CONTINUOUS meaning NAND core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: + Cleanup/simplification of a few aspects in the driver + Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: + Use of_device_get_match_data() instead of of_match_device() + Add an entry in MAINTAINERS for this driver + Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata() SPI NOR core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: + Mark the driver as "dangerous" in Kconfig + Fix atomic sequence handling + Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: + fix a typo in a function name + add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line" * tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits) mtd: nand: Pass mode information to nand_page_io_req mtd: cfi_cmdset_0002: Change erase one block to enable XIP once mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS mtd: bcm47xxpart: add of_match_table with a new DT binding dt-bindings: mtd: document Broadcom's BCM47xx partitions mtd: spi-nor: Add support for EN25QH32 mtd: spi-nor: Add support for is25wp series chips mtd: spi-nor: Add Winbond w25q32jv support mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control mtd: spi-nor: intel: provide a range for poll_timout mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig mtd: spi-nor: intel-spi: Fix atomic sequence handling mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op mtd: rawnand: use bit-wise majority to recover the ONFI param page ...
2018-06-07Merge tag 'spi-nor/for-4.18' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon7-24/+218
Core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: * Mark the driver as "dangerous" in Kconfig * Fix atomic sequence handling * Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: * fix a typo in a function name * add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line
2018-06-07Merge tag 'nand/for-4.18' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon16-400/+267
Core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: * Cleanup/simplification of a few aspects in the driver * Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: * Use of_device_get_match_data() instead of of_match_device() * Add an entry in MAINTAINERS for this driver * Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata()
2018-06-07mtd: ubi: Update ubi-media.h to dual licenseLionel Debieve1-19/+3
Update license template using SPDX. Move the global layout of UBI headers to dual license helping UBI to be the standard solution for raw NAND management. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Detect EBA mismatches on-the-flyRichard Weinberger1-0/+17
Now we have the machinery to detect EBA mismatches on-the-fly by comparing the in-memory volume ID and LEB number with the found VID header. This helps to detect malfunction of Fastmap. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Check each mapping only onceRichard Weinberger6-1/+52
Maintain a bitmap to keep track of which LEB->PEB mapping was checked already. That way we have to read back VID headers only once. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Correctly handle interrupted erasures in EBARichard Weinberger1-1/+89
Fastmap cannot track the LEB unmap operation, therefore it can happen that after an interrupted erasure the mapping still looks good from Fastmap's point of view, while reading from the PEB will cause an ECC error and confuses the upper layer. Instead of teaching users of UBI how to deal with that, we read back the VID header and check for errors. If the PEB is empty or shows ECC errors we fixup the mapping and schedule the PEB for erasure. Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Cc: <stable@vger.kernel.org> Reported-by: martin bayern <Martinbayern@outlook.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Cancel work upon detachRichard Weinberger2-3/+4
Ben Hutchings pointed out that 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") does not really fix the problem, it just reduces the risk to hit the race window where fastmap work races against free()'ing ubi->volumes[]. The correct approach is making sure that no more fastmap work is in progress before we free ubi data structures. So we cancel fastmap work right after the ubi background thread is stopped. By setting ubi->thread_enabled to zero we make sure that no further work tries to wake the thread. Fixes: 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Martin Townsend <mtownsend1973@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-06Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-2/+3
Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook1-2/+3
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05Merge tag 'rslib-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds2-39/+35
Pull reed-salomon library updates from Kees Cook: "Refactors rslib and callers to provide a per-instance allocation area instead of performing VLAs on the stack" * tag 'rslib-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: rslib: Allocate decoder buffers to avoid VLAs mtd: rawnand: diskonchip: Allocate rs control per instance rslib: Split rs control struct rslib: Simplify error path rslib: Remove GPL boilerplate rslib: Add SPDX identifiers rslib: Cleanup top level comments rslib: Cleanup whitespace damage dm/verity_fec: Use GFP aware reed solomon init rslib: Add GFP aware init function
2018-06-04Merge tag 'spi-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds2-158/+81
Pull spi updates from Mark Brown: "Quite a busy release for SPI, mainly as a result of Boris Brezillon's work on improving the integration with MTD for accelerated SPI flash controllers. He's added a new spi_mem interface which works a lot better with general hardware and converted the users over to it, as a result of this work we've got some MTD changes in here as well. Other highlights include: - Lots of spring cleaning for the s3c64xx driver. - Removal of the bcm53xx, the hardware is also supported by the mspi driver but SoC naming had caused people to miss the duplication. - Conversion of the pxa2xx driver to use the standard message processing loop rather than open coding. - A bunch of improvements to the runtime PM of the OMAP McSPI driver" * tag 'spi-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits) spi: Fix typo on SPI_MEM help text spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCAC mtd: devices: m25p80: Use spi_mem_set_drvdata() instead of spi_set_drvdata() spi: omap2-mcspi: Remove unnecessary pm_runtime_force_suspend() spi: Add missing pm_runtime_put_noidle() after failed get spi: ti-qspi: Make sure res_mmap != NULL before dereferencing it spi: spi-s3c64xx: Fix system resume support spi: bcm-qspi: Fix build failure caused by spi_flash_read() API removal spi: Get rid of the spi_flash_read() API mtd: spi-nor: Use the spi_mem_xx() API spi: ti-qspi: Implement the spi_mem interface spi: bcm-qspi: Implement the spi_mem interface spi: Make support for regular transfers optional when ->mem_ops != NULL spi: Extend the core to ease integration of SPI memory controllers spi: remove forgotten CONFIG_SPI_BCM53XX spi: remove the older/duplicated bcm53xx driver spi: pxa2xx: check clk_prepare_enable() return value spi: lpspi: Switch to SPDX identifier spi: mxs: Switch to SPDX identifier spi: imx: Switch to SPDX identifier ...
2018-06-04Merge branch 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-13/+1
Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-04Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-blockLinus Torvalds1-6/+14
Pull block updates from Jens Axboe: - clean up how we pass around gfp_t and blk_mq_req_flags_t (Christoph) - prepare us to defer scheduler attach (Christoph) - clean up drivers handling of bounce buffers (Christoph) - fix timeout handling corner cases (Christoph/Bart/Keith) - bcache fixes (Coly) - prep work for bcachefs and some block layer optimizations (Kent). - convert users of bio_sets to using embedded structs (Kent). - fixes for the BFQ io scheduler (Paolo/Davide/Filippo) - lightnvm fixes and improvements (Matias, with contributions from Hans and Javier) - adding discard throttling to blk-wbt (me) - sbitmap blk-mq-tag handling (me/Omar/Ming). - remove the sparc jsflash block driver, acked by DaveM. - Kyber scheduler improvement from Jianchao, making it more friendly wrt merging. - conversion of symbolic proc permissions to octal, from Joe Perches. Previously the block parts were a mix of both. - nbd fixes (Josef and Kevin Vigor) - unify how we handle the various kinds of timestamps that the block core and utility code uses (Omar) - three NVMe pull requests from Keith and Christoph, bringing AEN to feature completeness, file backed namespaces, cq/sq lock split, and various fixes - various little fixes and improvements all over the map * tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits) blk-mq: update nr_requests when switching to 'none' scheduler block: don't use blocking queue entered for recursive bio submits dm-crypt: fix warning in shutdown path lightnvm: pblk: take bitmap alloc. out of critical section lightnvm: pblk: kick writer on new flush points lightnvm: pblk: only try to recover lines with written smeta lightnvm: pblk: remove unnecessary bio_get/put lightnvm: pblk: add possibility to set write buffer size manually lightnvm: fix partial read error path lightnvm: proper error handling for pblk_bio_add_pages lightnvm: pblk: fix smeta write error path lightnvm: pblk: garbage collect lines with failed writes lightnvm: pblk: rework write error recovery path lightnvm: pblk: remove dead function lightnvm: pass flag on graceful teardown to targets lightnvm: pblk: check for chunk size before allocating it lightnvm: pblk: remove unnecessary argument lightnvm: pblk: remove unnecessary indirection lightnvm: pblk: return NVM_ error on failed submission lightnvm: pblk: warn in case of corrupted write buffer ...
2018-05-30mtd: cfi_cmdset_0002: Change erase one block to enable XIP onceTokunori Ikegami1-4/+2
To enable XIP it is executed both normal and error cases. This call can be moved after the for loop as same with erase chip. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-30mtd: cfi_cmdset_0002: Change erase functions to check chip good onlyTokunori Ikegami1-10/+12
Currently the functions use to check both chip ready and good. But the chip ready is not enough to check the operation status. So change this to check the chip good instead of this. About the retry functions to make sure the error handling remain it. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-30mtd: cfi_cmdset_0002: Change erase functions to retry for errorTokunori Ikegami1-0/+10
For the word write functions it is retried for error. But it is not implemented to retry for the erase functions. To make sure for the erase functions change to retry as same. This is needed to prevent the flash erase error caused only once. It was caused by the error case of chip_good() in the do_erase_oneblock(). Also it was confirmed on the MACRONIX flash device MX29GL512FHT2I-11G. But the error issue behavior is not able to reproduce at this moment. The flash controller is parallel Flash interface integrated on BCM53003. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-30mtd: cfi_cmdset_0002: Change definition naming to retry write operationTokunori Ikegami1-3/+3
The definition can be used for other program and erase operations also. So change the naming to MAX_RETRIES from MAX_WORD_RETRIES. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-30mtd: cfi_cmdset_0002: Change write buffer to check correct valueTokunori Ikegami1-1/+1
For the word write it is checked if the chip has the correct value. But it is not checked for the write buffer as only checked if ready. To make sure for the write buffer change to check the value. It is enough as this patch is only checking the last written word. Since it is described by data sheets to check the operation status. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-25Merge tag 'davinci-for-v4.18/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/socOlof Johansson1-3/+3
DaVinci SoC support updates for v4.18 Mainly contains patches to move NAND chipselect to platform data (currently platform device id is being used). These patches have been acked by NAND maintainer and because of the driver dependency an immutable branch has been provided to Boris. The other patch is to remove an unnecessary postcore_initcall() on DM644x which is needed for common clock framework conversion. * tag 'davinci-for-v4.18/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: dm644x: remove unnecessary postcore_initcall() ARM: davinci: aemif: stop using pdev->id as nand chipselect mtd: rawnand: davinci: stop using pdev->id as chipselect ARM: davinci: neuros-osd2: specify the chipselect in davinci_nand_pdata ARM: davinci: dm646x-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: mityomapl138: specify the chipselect in davinci_nand_pdata ARM: davinci: dm644x-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: dm365-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: dm355-leopard: specify the chipselect in davinci_nand_pdata ARM: davinci: dm355-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: da850-evm: specify the chipselect in davinci_nand_pdata ARM: davinci: da830-evm: specify the chipselect in davinci_nand_pdata mtd: rawnand: davinci: store the core chipselect number in platform data Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-23mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUSGeert Uytterhoeven1-1/+4
The comment about offset zero was not updated when changing behavior: - Automatic offset calculation is indicated by OFFSET_CONTINUOUS, - Zero really means offset zero. Fixes: b175d03dd2072836 ("[PATCH] mtd cmdlinepart: allow zero offset value") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-23mtd: bcm47xxpart: add of_match_table with a new DT bindingRafał Miłecki1-0/+7
This allows using bcm47xxpart parser to find partitions on flash described in DT using the "brcm,bcm947xx-cfe-partitions" compatible property. It means this parser doesn't have to be explicitly selected by a flash driver anymore. It can be used e.g. together with a generic m25p80 / spi-nor if device is just properly described. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-22mtd: devices: m25p80: Use spi_mem_set_drvdata() instead of spi_set_drvdata()Boris Brezillon1-1/+1
SPI mem drivers should use spi_mem_set_drvdata() not spi_set_drvdata() to store their private data. Using spi_set_drvdata() will mess the spi -> spi-mem link up and cause a kernel panic at shutdown or device removal time. Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com> on R8A7791 Porter Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-18mtd: spi-nor: Add support for EN25QH32YuheiOKAWA1-0/+1
Add support for Eon en25qh32 spi nor flash. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: Add support for is25wp series chipsKimmo Rautkoski1-0/+6
Added support for is25wp032, is25wp064 and is25wp128. Signed-off-by: Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: Add Winbond w25q32jv supportStephen Douthit1-0/+5
Datasheet: https://www.winbond.com/resource-files/w25q32jv%20dtr%20revf%2002242017.pdf Minimal testing done with fw_printenv/fw_setenv, test board did not support dual or quad access. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Tested-by: Stephen Douthit <stephend@silicom-usa.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080aYogesh Gaur1-0/+11
LS2080a/LS1088a supports Freescale Quad SPI controller. Add fsl-quadspi driver support for ls2080a and ls1088a chip. Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset controlPhilipp Zabel1-1/+1
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: intel: provide a range for poll_timoutNicholas Mc Guire1-2/+2
The overall poll time here is INTEL_SPI_TIMEOUT * 1000 which is 5000 * 1000 - so 5seconds and it is coded as a tight loop here delay_us to readl_poll_timeout() is set to 0. As this is never called in an atomic context sleeping should be no issue and there is no reasons for the tight-loop here. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_readYogesh Gaur1-2/+2
Fix api naming typo _init_ahb_read fsl_qspi_init_abh_read --> fsl_qspi_init_ahb_read Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in KconfigMika Westerberg1-2/+2
The driver is not meant for normal users at all but instead such users who really know what they are doing and are able to build their own kernel to enable it. Mark both driver Kconfig entries as dangerous to make sure the driver is not accidentally enabled without understanding possible consequences in doing so. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-18mtd: spi-nor: intel-spi: Fix atomic sequence handlingMika Westerberg1-9/+67
On many older systems using SW sequencer the PREOP_OPTYPE register contains two preopcodes as following: PREOP_OPTYPE=0xf2785006 The last two bytes are the opcodes decoded to: 0x50 - Write enable for volatile status register 0x06 - Write enable The former is used to modify volatile bits in the status register. For non-volatile bits the latter is needed. Preopcodes are used in SW sequencer to send one command "atomically" without anything else interfering the transfer. The sequence that gets executed is: - Send preopcode (write enable) from PREOP_OPTYPE register - Send the actual SPI command - Poll busy bit in the status register (0x05, RDSR) Commit 8c473dd61bb5 ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be programmed by BIOS") enabled atomic sequence handling but because both preopcodes are programmed, the following happens: if (preop >> 8) val |= SSFSTS_CTL_SPOP; Since on these systems preop >> 8 == 0x50 we end up picking volatile write enable instead. Because of this the actual write command is pretty much NOP unless there is a WREN latched in the chip already. Furthermore we should not really just assume that WREN was issued in previous call to intel_spi_write_reg() because that might not be the case. This updates driver to first check that the opcode is actually available in PREOP_OPTYPE register and if not return error back to the spi-nor core (if the controller is not locked we program it now). In addition we save the opcode to ispi->atomic_preopcode field which is checked in next call to intel_spi_sw_cycle() to actually enable atomic sequence using the requested preopcode. Fixes: 8c473dd61bb5 ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be programmed by BIOS") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig1-13/+1
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-15mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES opBoris Brezillon1-18/+9
The ONFI spec clearly says that FAIL bit is only valid for PROGRAM, ERASE and READ-with-on-die-ECC operations, and should be ignored otherwise. It seems that checking it after sending a SET_FEATURES is a bad idea because a previous READ, PROGRAM or ERASE op may have failed, and depending on the implementation, the FAIL bit is not cleared until a new READ, PROGRAM or ERASE is started. This leads to ->set_features() returning -EIO while it actually worked, which can sometimes stop a batch of READ/PROGRAM ops. Note that we only fix the ->exec_op() path here, because some drivers are abusing the NAND_STATUS_FAIL flag in their ->waitfunc() implementation to propagate other kind of errors, like wait-ready-timeout or controller-related errors. Let's not try to fix those drivers since they worked fine so far. Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-05-14mtd: rawnand: marvell: Fix read logic for layouts with ->nchunks > 2Boris Brezillon1-3/+5
The code is doing monolithic reads for all chunks except the last one which is wrong since a monolithic read will issue the READ0+ADDRS+READ_START sequence. It not only takes longer because it forces the NAND chip to reload the page content into its internal cache, but by doing that we also reset the column pointer to 0, which means we'll always read the first chunk instead of moving to the next one. Rework the code to do a monolithic read only for the first chunk, then switch to naked reads for all intermediate chunks and finally issue a last naked read for the last chunk. Fixes: 02f26ecf8c77 mtd: nand: add reworked Marvell NAND controller driver Cc: stable@vger.kernel.org Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-05-13mtd: rawnand: use bit-wise majority to recover the ONFI param pageWan, Jane (Nokia - US/Sunnyvale)1-5/+47
Per ONFI specification (Rev. 4.0), if all parameter pages have invalid CRC values, the bit-wise majority may be used to recover the contents of the parameter page from the parameter page copies present. Signed-off-by: Jane Wan <Jane.Wan@nokia.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-12mtd: cfi_cmdset_0002: Fix coding style issuesTokunori Ikegami1-13/+13
This patch fixes mainly to remove unneeded spaces after '(' and before ')'. Also some indentation errors are fixed. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-12mtd: bcm47xxpart: improve handling TRX partition sizeRafał Miłecki1-4/+18
When bcm47xxpart finds a TRX partition (container) it's supposed to jump to the end of it and keep looking for more partitions. TRX and its subpartitions are handled by a separate parser. The problem with old code was relying on the length specified in a TRX header. That isn't reliable as TRX is commonly modified to have checksum cover only non-changing subpartitions. Otherwise modifying e.g. a rootfs would result in CRC32 mismatch and bootloader refusing to boot a firmware. Fix it by trying better to figure out a real TRX size. We can securely assume that TRX has to cover all subpartitions and the last one is at least of a block size in size. Then compare it with a length field. This makes code more optimal & reliable thanks to skipping data that shouldn't be parsed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-11mtd_blkdevs: handle highmem pagesChristoph Hellwig1-6/+14
Just kmap the single payload page before passing it on to the FTL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11mtd: spi-nor: Use the spi_mem_xx() APIBoris Brezillon2-157/+80
The spi_mem_xxx() API has been introduced to replace the spi_flash_read() one. Make use of it so we can get rid of spi_flash_read(). Note that using spi_mem_xx() also simplifies the code because this API takes care of using the regular spi_sync() interface when the optimized ->mem_ops interface is not implemented by the controller. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de> Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-10mtd: rawnand: Make sure we wait tWB before polling the STATUS regBoris Brezillon1-0/+5
NAND chips require a bit of time to take the NAND operation into account and set the BUSY bit in the STATUS reg. Make sure we don't poll the STATUS reg too early in nand_soft_waitrdy(). Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-05-09mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pagesJane Wan1-7/+10
Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page read is not valid, the host should read redundant parameter page copies. Fix FSL NAND driver to read the two redundant copies which are mandatory in the specification. Signed-off-by: Jane Wan <Jane.Wan@nokia.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.