aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/bareudp.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-03-30bareudp: allow UDP L4 GRO passthrouPaolo Abeni1-0/+1
Similar to the previous commit, let even geneve passthrou the L4 GRO packets Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-04udp: call udp_encap_enable for v6 sockets when enabling encapXin Long1-6/+0
When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive(). This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock(). v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch. Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18bareudp: add NETIF_F_FRAGLIST flag for dev featuresXin Long1-2/+3
Like vxlan and geneve, bareudp also needs this dev feature to support some protocol's HW GSO. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: bareudp: simplify error paths calling dellinkJakub Kicinski1-6/+2
bareudp_dellink() only needs the device list to hand it to unregister_netdevice_queue(). We can pass NULL in, and unregister_netdevice_queue() will do the unregistering. There is no chance for batching on the error path, anyway. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20210111052922.2145003-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06net: bareudp: add missing error handling for bareudp_link_config()Jakub Kicinski1-8/+14
.dellink does not get called after .newlink fails, bareudp_newlink() must undo what bareudp_configure() has done if bareudp_link_config() fails. v2: call bareudp_dellink(), like bareudp_dev_create() does Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Link: https://lore.kernel.org/r/20210105190725.1736246-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04bareudp: Fix use of incorrect min_headroom sizeTaehee Yoo1-1/+1
In the bareudp6_xmit_skb(), it calculates min_headroom. At that point, it uses struct iphdr, but it's not correct. So panic could occur. The struct ipv6hdr should be used. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 2001:db8:0::2/64 dev veth1 for i in {10..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec A ip link set bareudp$i up ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \ 2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \ dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec B ip link set bareudp$i up ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \ 2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \ dev bareudp$i done ip netns exec A ping 2001:db8:7::2 Splat looks like: [ 66.436679][ C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0 [ 66.441626][ C2] ------------[ cut here ]------------ [ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109! [ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819 [ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f [ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80 [ 66.462314][ C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286 [ 66.464281][ C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000 [ 66.467216][ C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0 [ 66.469768][ C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d [ 66.472297][ C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e [ 66.474833][ C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0 [ 66.477361][ C2] FS: 00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000 [ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.482296][ C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0 [ 66.484811][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.487793][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.490424][ C2] Call Trace: [ 66.491469][ C2] <IRQ> [ 66.492374][ C2] ? eth_header+0x28/0x190 [ 66.494054][ C2] ? eth_header+0x28/0x190 [ 66.495401][ C2] skb_push.cold.99+0x22/0x22 [ 66.496700][ C2] eth_header+0x28/0x190 [ 66.497867][ C2] neigh_resolve_output+0x3de/0x720 [ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0 [ 66.501176][ C2] __neigh_update+0x8bd/0x20a0 [ 66.502749][ C2] ndisc_update+0x34/0xc0 [ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80 [ 66.505041][ C2] ? pndisc_redo+0x20/0x20 [ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 66.506965][ C2] ndisc_rcv+0x3a0/0x470 [ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00 [ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560 [ 66.509719][ C2] ip6_input_finish+0x5b/0xf0 [ 66.510615][ C2] ip6_input+0xcd/0x2d0 [ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0 [ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0 [ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560 [ 66.514414][ C2] ipv6_rcv+0xe8/0x300 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04bareudp: set NETIF_F_LLTX flagTaehee Yoo1-0/+1
Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ #819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02bareudp: constify device_type declarationJonas Bonn1-1/+1
device_type may be declared as const. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Link: https://lore.kernel.org/r/20201202122324.564918-1-jonas@norrbonn.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09net: switch to dev_get_tstats64Heiner Kallweit1-1/+1
Replace ip_tunnel_get_stats64() with the new identical core function dev_get_tstats64(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06bareudp: use dev_sw_netstats_rx_add()Fabian Frederick1-8/+3
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04tunnels: PMTU discovery support for directly bridged IP packetsStefano Brivio1-2/+3
It's currently possible to bridge Ethernet tunnels carrying IP packets directly to external interfaces without assigning them addresses and routes on the bridged network itself: this is the case for UDP tunnels bridged with a standard bridge or by Open vSwitch. PMTU discovery is currently broken with those configurations, because the encapsulation effectively decreases the MTU of the link, and while we are able to account for this using PMTU discovery on the lower layer, we don't have a way to relay ICMP or ICMPv6 messages needed by the sender, because we don't have valid routes to it. On the other hand, as a tunnel endpoint, we can't fragment packets as a general approach: this is for instance clearly forbidden for VXLAN by RFC 7348, section 4.3: VTEPs MUST NOT fragment VXLAN packets. Intermediate routers may fragment encapsulated VXLAN packets due to the larger frame size. The destination VTEP MAY silently discard such VXLAN fragments. The same paragraph recommends that the MTU over the physical network accomodates for encapsulations, but this isn't a practical option for complex topologies, especially for typical Open vSwitch use cases. Further, it states that: Other techniques like Path MTU discovery (see [RFC1191] and [RFC1981]) MAY be used to address this requirement as well. Now, PMTU discovery already works for routed interfaces, we get route exceptions created by the encapsulation device as they receive ICMP Fragmentation Needed and ICMPv6 Packet Too Big messages, and we already rebuild those messages with the appropriate MTU and route them back to the sender. Add the missing bits for bridged cases: - checks in skb_tunnel_check_pmtu() to understand if it's appropriate to trigger a reply according to RFC 1122 section 3.2.2 for ICMP and RFC 4443 section 2.4 for ICMPv6. This function is already called by UDP tunnels - a new function generating those ICMP or ICMPv6 replies. We can't reuse icmp_send() and icmp6_send() as we don't see the sender as a valid destination. This doesn't need to be generic, as we don't cover any other type of ICMP errors given that we only provide an encapsulation function to the sender While at it, make the MTU check in skb_tunnel_check_pmtu() accurate: we might receive GSO buffers here, and the passed headroom already includes the inner MAC length, so we don't have to account for it a second time (that would imply three MAC headers on the wire, but there are just two). This issue became visible while bridging IPv6 packets with 4500 bytes of payload over GENEVE using IPv4 with a PMTU of 4000. Given the 50 bytes of encapsulation headroom, we would advertise MTU as 3950, and we would reject fragmented IPv6 datagrams of 3958 bytes size on the wire. We're exclusively dealing with network MTU here, though, so we could get Ethernet frames up to 3964 octets in that case. v2: - moved skb_tunnel_check_pmtu() to ip_tunnel_core.c (David Ahern) - split IPv4/IPv6 functions (David Ahern) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-7/+22
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28bareudp: forbid mixing IP and MPLS in multiproto modeGuillaume Nault1-7/+22
In multiproto mode, bareudp_xmit() accepts sending multicast MPLS and IPv6 packets regardless of the bareudp ethertype. In practice, this let an IP tunnel send multicast MPLS packets, or an MPLS tunnel send IPv6 packets. We need to restrict the test further, so that the multiproto mode only enables * IPv6 for IPv4 tunnels, * or multicast MPLS for unicast MPLS tunnels. To improve clarity, the protocol validation is moved to its own function, where each logical test has its own condition. v2: s/ntohs/htons/ Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21bareudp: Reverted support to enable & disable rx metadata collectionMartin Varghese1-16/+5
The commit fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") breaks the the original(5.7) default behavior of bareudp module to collect RX metadadata at the receive. It was added to avoid the crash at the kernel neighbour subsytem when packet with metadata from bareudp is processed. But it is no more needed as the commit 394de110a733 ("net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb") solves this crash. Fixes: fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-28bareudp: Added attribute to enable & disable rx metadata collectionMartin1-6/+17
Metadata need not be collected in receive if the packet from bareudp device is not targeted to openvswitch. Signed-off-by: Martin <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18bareudp: Fixed multiproto mode configurationMartin1-0/+3
Code to handle multiproto configuration is missing. Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS") Signed-off-by: Martin <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16bareudp: Fixed configuration to avoid having garbage valuesMartin1-0/+2
Code to initialize the conf structure while gathering the configuration of the device was missing. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Martin <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07net: bareudp: avoid uninitialized variable warningArnd Bergmann1-14/+4
clang points out that building without IPv6 would lead to returning an uninitialized variable if a packet with family!=AF_INET is passed into bareudp_udp_encap_recv(): drivers/net/bareudp.c:139:6: error: variable 'err' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (family == AF_INET) ^~~~~~~~~~~~~~~~~ drivers/net/bareudp.c:146:15: note: uninitialized use occurs here if (unlikely(err)) { ^~~ include/linux/compiler.h:78:42: note: expanded from macro 'unlikely' # define unlikely(x) __builtin_expect(!!(x), 0) ^ drivers/net/bareudp.c:139:2: note: remove the 'if' if its condition is always true if (family == AF_INET) ^~~~~~~~~~~~~~~~~~~~~~ This cannot happen in practice, so change the condition in a way that gcc sees the IPv4 case as unconditionally true here. For consistency, change all the similar constructs in this file the same way, using "if(IS_ENABLED())" instead of #if IS_ENABLED()". Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11bareudp: Fixed bareudp receive handlingMartin Varghese1-0/+6
Reverted commit "2baecda bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()" An explicit call to udp_encap_enable is needed as the setup_udp_tunnel_sock does not call udp_encap_enable if the if the socket is of type v6. Bareudp device uses v6 socket to receive v4 & v6 traffic CC: Taehee Yoo <ap420073@gmail.com> Fixes: 2baecda37f4e ("bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()Taehee Yoo1-3/+0
In the current code, udp_encap_enable() is called in bareudp_socket_create(). But, setup_udp_tunnel_sock() internally calls udp_encap_enable(). So, udp_encap_enable() is unnecessary. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08bareudp: print error message when command failsTaehee Yoo1-3/+10
When bareudp netlink command fails, it doesn't print any error message. So, users couldn't know the exact reason. In order to tell the exact reason to the user, the extack error message is used in this patch. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08bareudp: add module aliasTaehee Yoo1-0/+1
In the current bareudp code, there is no module alias. So, RTNL couldn't load bareudp module automatically. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24bareudp: Fix uninitialized variable warnings.David S. Miller1-0/+2
drivers/net/bareudp.c: In function 'bareudp_xmit_skb': drivers/net/bareudp.c:346:9: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 346 | return err; | ^~~ drivers/net/bareudp.c: In function 'bareudp6_xmit_skb': drivers/net/bareudp.c:407:9: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 407 | return err; Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: Special handling for IP & MPLS.Martin Varghese1-3/+64
Special handling is needed in bareudp module for IP & MPLS as they support more than one ethertypes. MPLS has 2 ethertypes. 0x8847 for MPLS unicast and 0x8848 for MPLS multicast. While decapsulating MPLS packet from UDP packet the tunnel destination IP address is checked to determine the ethertype. The ethertype of the packet will be set to 0x8848 if the tunnel destination IP address is a multicast IP address. The ethertype of the packet will be set to 0x8847 if the tunnel destination IP address is a unicast IP address. IP has 2 ethertypes.0x0800 for IPV4 and 0x86dd for IPv6. The version field of the IP header tunnelled will be checked to determine the ethertype. This special handling to tunnel additional ethertypes will be disabled by default and can be enabled using a flag called multiproto. This flag can be used only with ethertypes 0x8847 and 0x0800. Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.Martin Varghese1-0/+743
The Bareudp tunnel module provides a generic L3 encapsulation tunnelling module for tunnelling different protocols like MPLS, IP,NSH etc inside a UDP tunnel. Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.