aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/benet/be_hw.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-08-03be2net: add support for flashing Teranetics PHY firmwareSathya Perla1-7/+14
Support for flashing RJ45 PHY (from Teranetics) on a 10GBaseT BE3 card. Signed-off-by: Naresh G <bgottumukkala@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30be2net: Support for FAT dump retrieval using ethtool --register-dump optionSomnath Kotur1-0/+4
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16be2net: Copyright notice change. Update to Emulex instead of ServerEnginesAjit Khaparde1-5/+5
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14be2net: changes for BE3 native mode supportSathya Perla1-3/+38
So far be2net has been using BE3 in legacy mode. It now checks for native mode capability and if available it sets it. In native mode, the RX_COMPL structure is different from that in legacy mode. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Add error recovery during load for LancerPadmanabh Ratnakar1-0/+12
Add error recovery during load for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: use hba_port_num instead of port_numAjit Khaparde1-0/+47
Use hba_port_num for phy loopback and ethtool phy identification. From: Suresh R <suresh.reddy@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27be2net: adding support for Lancer family of CNAsSathya Perla1-4/+35
Key changes are: - EQ ids are not assigned consecutively in Lancer. So, fix mapping of MSIx vector to EQ-id. - BAR mapping and some req locations different for Lancer. - TCP,UDP,IP checksum fields must be compulsorily set in TX wrb for TSO in Lancer. - CEV_IST reg not present in Lancer; so, peek into event queue to check for new entries - cq_create and mcc_create cmd interface is different for Lancer; handle accordingly Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03be2net: fix net-snmp error because of wrong packet statsAjit Khaparde1-2/+5
Wrong packet statistics for multicast Rx was causing net-snmp error messages every 15 seconds. Instead of picking the multicast stats from hardware, now maintain it in the driver itself. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-07-30be2net: add code to dump registers for debugAjit Khaparde1-0/+10
when the BE device becomes unresponsive, dump the registers to help debugging Signed-off-by: Somnath K <somnathk@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16be2net: enable ipv6 tso supportAjit Khaparde1-1/+1
Add ipv6 support to the be2net driver. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16fix typos concerning "management"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-01be2net: Adding PCI SRIOV supportSarveshwar Bandi1-0/+3
- Patch adds support to enable PCI SRIOV in the driver and changes to handle initialization of PCI virtual functions. - Function handler to change mac addresses for VF from its corresponding PF. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03be2net: download NCSI section during firmware updateSarveshwar Bandi1-2/+3
Adding code to update NCSI section while updating firmware on the controller. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: update copyright datesAjit Khaparde1-1/+1
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix for flashing the BladeEngine3 ASICAjit Khaparde1-36/+83
Now flashing both BE2 and BE3 devices is supported. From: Naresh G <nareshg@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Support for WoL using magic packet after suspend.Ajit Khaparde1-0/+4
Add support for WOL using Magic Packet after suspend is done. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20be2net: Patch to flash redboot section while firmware update.Sarveshwar Bandi1-0/+5
Please apply patch to update redboot section while firmware update. Code checks if section needs to be updated before actually doing it. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07be2net: Changes to support flashing of the be2 network adapterAjit Khaparde1-1/+84
Changes to support flashing of the be2 network adapter using the request_firmware() & ethtool infrastructure. The trigger to flash the device will come from ethtool utility. The driver will invoke request_firmware() to start the flash process. The file containing the flash image is expected to be available in /lib/firmware/ Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-01be2net: remove pci_func field from be_adapter structSathya Perla1-3/+0
pci function is available as PCI_FUNC(pdev->devfn); no need for a separate field. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03be2net: fix spurious interrupt handling in intx modeSathya Perla1-0/+4
Occasionally we may see an interrupt without an event in the eq. In intx, we currently see the event queue and return IRQ_NONE causing a the irq to be disabled ("no one cared".) Instead, read the CEV_ISR reg to check the existence of the interrupt. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: Add MCC queue mechanism for BE cmdsSathya Perla1-1/+7
Currenlty all cmds use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. Instead cmds that may be called in BH context must use the MCC queue to post cmds. The cmd completions are rcvd in a separate completion queue and the events are placed in the tx-event queue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-11net: Add be2net driver.Sathya Perla1-0/+211
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.