aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x_cmn.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-02-06bnx2x: MTU for FCoE L2 ringVladislav Zolotarov1-14/+39
Always configure an FCoE L2 ring with a mini-jumbo MTU size (2500). To do that we had to move the rx_buf_size parameter from per function level to a per ring level. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add DCB supportVladislav Zolotarov1-0/+2
Adding DCB initialization and handling on 57712 FW/HW Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add a select queue callbackVladislav Zolotarov1-0/+29
This callback required to allow FCoE traffic to be sent on separate priority queue from other L2 traffic, which is managed by PFC in HW. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add FCoE ringVladislav Zolotarov1-17/+64
Includes new driver structures and FW/HW configuration for FCoE ring Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09bnx2x: LSO code was broken on BE platformsVladislav Zolotarov1-16/+26
Make the LSO code work on BE platforms: parsing_data field of a parsing BD (PBD) for 57712 was improperly composed which made FW read wrong values for TCP header's length and offset and, as a result, the corresponding PCI device was performing bad DMA reads triggering EEH. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01bnx2x: Add Nic partitioning mode (57712 devices)Dmitry Kravkov1-10/+24
NIC partitioning is another flavor of multi function - having few PCI functions share the same physical port. Unlike the currently supported mode of multi-function which depends on the switch configuration and uses outer-VLAN, the NPAR mode is switch independent and uses the MAC addresses to distribute incoming packets to the different functions. This patch adds the specific HW setting of the NPAR mode and some distinctions between switch dependent (SD) and switch independent (SI) multi-function (MF) modes where the configuration is not the same. Advance driver version to 1.60.00-6 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28bnx2x: Use helpers instead of direct access to the shinfo(skb) fieldsVladislav Zolotarov1-5/+4
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12bnx2x: Look inside vlan when determining checksum proto.Hao Zheng1-1/+1
Currently the skb->protocol field is used to setup checksum offloading on transmit for the correct protocol. However, if vlan offloading is disabled or otherwise not used, the protocol field will be ETH_P_8021Q, not the actual protocol. This will cause the checksum to be not computed correctly, even though the hardware is capable of looking inside vlan tags. Instead, look inside the header if necessary to determine the correct protocol type. To some extent this fixes a regression from 2.6.36 because it was previously not possible to disable vlan offloading and this error case was not exposed. Signed-off-by: Hao Zheng <hzheng@nicira.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24bnx2x: make local function static and remove dead codestephen hemminger1-1/+2
Make many functions that are only used in one file static. Remove dead code for override_led_value. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bnx2x: Update bnx2x to use new vlan accleration.Hao Zheng1-49/+11
Make the bnx2x driver use the new vlan accleration model. Signed-off-by: Hao Zheng <hzheng@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross1-2/+1
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: Use correct FW constant for header paddingDmitry Kravkov1-1/+1
the value of the constant is the same, but it's clearer to use original constant provided by HSI Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: do not deal with power if no capabilityDmitry Kravkov1-0/+6
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: remove redundant commands during error handlingDmitry Kravkov1-2/+0
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: Optimized the branching in the bnx2x_rx_int()Vladislav Zolotarov1-5/+6
Optimized the branching in the bnx2x_rx_int() based on the fact that FP CQE will always have at least one of START or STOP flags set, so if not both bits are set and START bit is not set, then it's a STOP bit that is set. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: code beautifyDmitry Kravkov1-27/+33
This patch does not include any functional changes. The changes are: empty lines, indentation and comments. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x, cnic: Fix SPQ return creditDmitry Kravkov1-13/+0
Return proper L2 and L5 SPQ (slow path queue) credits. Previously, all SPQ events were counted as L5 types. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: move msix table initialization to probe()Dmitry Kravkov1-113/+93
Decide which interrupt mode to use (MSI-X, MSI, INTa) only once in probe() and initialize appropriate structures. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: use L1_CACHE_BYTES instead of magic numberDmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: use proper constants for dma_unmap* callsDmitry Kravkov1-1/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: remove unused parameter in reuse_rx_skb()Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: Add 57712 supportDmitry Kravkov1-94/+181
57712 HW supported with same set of features as for 57710/57711 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x: rename MF related fieldsDmitry Kravkov1-1/+1
MF (multi-function) mode supported not only by 57711E (E1H) devices, but also by coming 57712E, then we use more generic names. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bnx2x, cnic, bnx2i: use new FW/HSIDmitry Kravkov1-218/+270
This is the new FW HSI blob and the relevant definitions without logic changes. It also included code adaptation for new HSI. New features are not enabled. New FW/HSI includes: - Support for 57712 HW - Future support for VF (not used) - Improvements in FW interrupts scheme - FW FCoE hooks (stubs for future usage) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-29bnx2x: Moved enabling of MSI to the bnx2x_set_num_queues()Dmitry Kravkov1-6/+11
Moved enabling of MSI to the bnx2x_set_num_queues() - the same functions that handles the initialization of the MSI-X. From: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27bnx2x: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-2/+4
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13bnx2x: Spread rx buffers between allocated queuesDmitry Kravkov1-1/+5
Default number of rx buffers will be divided equally between allocated queues. This will decrease amount of pre-allocated buffers on systems with multiple CPUs. User can override this behavior with ethtool -G. Minimum amount of rx buffers per queue set to 128. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07bnx2x: Add dual-media changesYaniv Rosner1-7/+7
Add required changes in order to support dual-media boards. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02drivers/net: avoid some skb->ip_summed initializationsEric Dumazet1-1/+1
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16bnx2x: Load firmware in open() instead of probe()Dmitry Kravkov1-0/+20
Loading firmware when actually bringing eth device up. This also will allow driver to be insmoded when filesystem with firmware files is not available yet. Suggested by Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28net: bnx2x_cmn.c needs net/ip6_checksum.h for csum_ipv6_magicStephen Rothwell1-0/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create bnx2x_cmn.* filesDmitry Kravkov1-0/+2251
Newly created files have no functionality changes, but includes some functionality from bnx2x_main.c which is common for PF and coming in the future VF driver. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.