aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/can/bfin_can.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21can: bfin_can: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-03net: can: use platform_{get,set}_drvdata()Jingoo Han1-6/+4
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-03-27can: bfin_can: declare locally used functions staticMarc Kleine-Budde1-2/+2
This patch fixes the following sparse warning: drivers/net/can/bfin_can.c:415:13: warning: symbol 'bfin_can_interrupt' was not declared. Should it be static? drivers/net/can/bfin_can.c:507:19: warning: symbol 'alloc_bfin_candev' was not declared. Should it be static? Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-12-03can: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27can: bfin_can: add MODULE_ALIASMarc Kleine-Budde1-0/+1
This patch adds a MODULE_ALIAS for the platform bindings, so that the module can be loaded automatically by udev. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: mark bittiming_const pointer in struct can_priv as constMarc Kleine-Budde1-1/+1
This patch marks the bittiming_const pointer as in the struct can_pric as "const". This allows us to mark the struct can_bittiming_const in the CAN drivers as "const", too. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-06drivers: net: Remove casts to same typeJoe Perches1-1/+1
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-03can: replace the dev_dbg/info/err/... with the new netdev_xxx macrosWolfgang Grandegger1-13/+8
Cc: uclinux-dist-devel@blackfin.uclinux.org Cc: Anant Gole <anantgole@ti.com> Cc: Chris Elston <celston@katalix.com> Cc: Sebastian Haas <haas@ems-wuensche.com> Cc: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Sebastian Haas <dev@sebastianhaas.info> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: bfin_can/ti_hecc/mscan: add missing do_get_berr_counter callbackWolfgang Grandegger1-0/+15
Cc: Anant Gole <anantgole@ti.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-11-29net/can: convert drivers/net/can/* to use module_platform_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/net/can/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Kurt Van Dijck <kurt.van.dijck@eia.be> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27can: bfin_can: auto-calculate accessor sizesMike Frysinger1-59/+59
Since we have a struct that defines the sizes of the registers, we don't need to explicitly use the 16bit read/write helpers. Let the code figure out which size access to make based on the size of the C type. There should be no functional changes here. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27can: bfin_can: simplify xmit id1 setupMike Frysinger1-15/+6
If we look closely, the 4 writes to TRANSMIT_CHL.id1 can be collapsed down into much simpler code. So do just that. This also fixes a build failure due to the I/O macros no longer getting pulled in. Their minor (and accidental) usage here gets dropped as part of the unification. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10net: trans_start cleanupsEric Dumazet1-2/+0
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13Fix some #includes in CAN drivers (rebased for net-next-2.6)Hans J. Koch1-1/+0
In the current implementation, CAN drivers need to #include <linux/can.h> _before_ they #include <linux/can/dev.h>, which is both ugly and unnecessary. Fix this by including <linux/can.h> in <linux/can/dev.h> and remove the #include <linux/can.h> lines from drivers. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22can: bfin_can: switch to common Blackfin can headerMike Frysinger1-90/+7
The MMR bits are being moved to this header, so include it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08can: fix bfin_can build error after alloc_candev() changeBarry Song1-1/+2
Looks like commit a6e4bc530403 didn't include updates to drivers so the Blackfin CAN driver fails to build now. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15can: Proper ctrlmode handling for CAN devicesChristian Pellegrin1-0/+1
This patch adds error checking of ctrlmode values for CAN devices. As an example all availabe bits are implemented in the mcp251x driver. Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-12can: Unify droping of invalid tx skbs and netdev statsOliver Hartkopp1-0/+3
To prevent the CAN drivers to operate on invalid socketbuffers the skbs are now checked and silently dropped at the xmit-function consistently. Also the netdev stats are consistently using the CAN data length code (dlc) for [rx|tx]_bytes now. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-13can: Fix data length code handling in rx pathOliver Hartkopp1-1/+1
A valid CAN dataframe can have a data length code (DLC) of 0 .. 8 data bytes. When reading the CAN controllers register the 4-bit value may contain values from 0 .. 15 which may exceed the reserved space in the socket buffer! The ISO 11898-1 Chapter 8.4.2.3 (DLC field) says that register values > 8 should be reduced to 8 without any error reporting or frame drop. This patch introduces a new helper macro to cast a given 4-bit data length code (dlc) to __u8 and ensure the DLC value to be max. 8 bytes. The different handlings in the rx path of the CAN netdevice drivers are fixed. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11can: add the driver for Analog Devices Blackfin on-chip CAN controllersBarry Song1-0/+783
Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: H.J. Oertel <oe@port.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.