aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/can/peak_canfd (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-11can: peak_canfd: provide hw timestamps in rx skbsStephane Grosjean1-2/+16
PEAK-System's CAN FD interfaces based on an IP core provide a timestamp for each CAN and STATUS message received. This patch transfers these received timestamps (clocked in microseconds) to hardware timestamps (clocked in nanoseconds) in the corresponding skbs raised to the network layer. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-11can: peak_canfd: fix checkpatch warningsMarc Kleine-Budde3-9/+7
This patch fixes checkpatch warnings in the peak_canfd driver. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-25can: mark expected switch fall-throughsGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/can/peak_canfd/peak_pciefd_main.c:668:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/spi/mcp251x.c:875:7: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/at91_can.c:895:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/at91_can.c:953:15: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/can/usb/peak_usb/pcan_usb.c: In function ‘pcan_usb_decode_error’: drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (n & PCAN_USB_ERROR_BUS_LIGHT) { ^ drivers/net/can/usb/peak_usb/pcan_usb.c:428:2: note: here case CAN_STATE_ERROR_WARNING: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Notice that in some cases spelling mistakes were fixed. In other cases, the /* fall through */ comment is placed at the bottom of the case statement, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 10 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.259525894@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 100 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-27can: peak_canfd: rearrange the way resources are releasedStephane Grosjean1-3/+6
This patch improves the sequence the resources are released by, first, - disabling the IRQ in the controller, then by - resetting the DMA logic, and finally, by - adding a read cycle to ensure that the above commands have been received before freeing the system interrupt. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-07-27can: peak_canfd: fix typo in error messageStephane Grosjean1-1/+1
This patch fixes a typo in the error message in pciefd_can_probe(). Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-07-27can: peak_canfd: use ndev irq instead of pci_dev oneStephane Grosjean1-3/+3
This cosmetic change should facilitate in the future the use of MSI rather than legacy INTx interrupts. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-07-27can: peak_canfd: remove useless defined symbolsStephane Grosjean1-3/+0
CANFD_IRQ_SET as well as CANFD_TX_PATH_SET are not used. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-07-27can: peak_canfd: improves 32-bit alignmentStephane Grosjean1-1/+1
The embedded firmware aligns its messages on 32-bit boundaries. This patch makes sure to browse through the list of received messages while respecting 32-bit alignment. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-07-23can: peak_canfd: fix firmware < v3.3.0: limit allocation to 32-bit DMA addr onlyStephane Grosjean1-0/+19
The DMA logic in firmwares < v3.3.0 embedded in the PCAN-PCIe FD cards family is not capable of handling a mix of 32-bit and 64-bit logical addresses. If the board is equipped with 2 or 4 CAN ports, then such a situation might lead to a PCIe Bus Error "Malformed TLP" packet as well as "irq xx: nobody cared" issue. This patch adds a workaround that requests only 32-bit DMA addresses when these might be allocated outside of the 4 GB area. This issue has been fixed in firmware v3.3.0 and next. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook1-2/+1
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-12can: peak/pcie_fd: remove useless code when interface startsStephane Grosjean1-11/+2
When an interface starts, the echo_skb array is empty and the network queue should be started only. This patch replaces useless code and locks when the internal RX_BARRIER message is received from the IP core, telling the driver that tx may start. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-03-12can: peak/pcie_fd: fix echo_skb is occupied! bugStephane Grosjean2-8/+12
This patch makes atomic the handling of the linux-can echo_skb array and the network tx queue. This prevents from the "BUG! echo_skb is occupied!" message to be printed by the linux-can core, in SMP environments. Reported-by: Diana Burgess <diana@peloton-tech.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-08can: peak/pcie_fd: fix potential bug in restarting tx queueStephane Grosjean1-6/+3
Don't rely on can_get_echo_skb() return value to wake the network tx queue up: can_get_echo_skb() returns 0 if the echo array slot was not occupied, but also when the DLC of the released echo frame was 0. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: peak/pci: fix potential bug when probe() failsStephane Grosjean1-1/+4
PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the PCI config during probing. In case one of these accesses fails, a POSITIVE PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be converted into a NEGATIVE errno for the probe() function to indicate it failed. Using the pcibios_err_to_errno() function, we make sure that the return code will always be negative. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10can: peak: Add support for new PCIe/M2 CAN FD interfacesStephane Grosjean1-2/+12
This adds support for the following PEAK-System CAN FD interfaces: PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels) PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.) PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels) PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.) PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels) Like the PCAN-PCIe FD interface, all of these boards run the same IP Core that is able to handle CAN FD (see also http://www.peak-system.com). Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-09can: peak_canfd: fix uninitialized symbol warningsStephane Grosjean1-1/+1
This patch fixes two uninitialized symbol warnings in the new code adding support of the PEAK-System PCAN-PCI Express FD boards, in the socket-CAN network protocol family. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boardsStephane Grosjean5-0/+1716
This patch adds the support of the PCAN-PCI Express FD boards made by PEAK-System, for computers using the PCI Express slot. The PCAN-PCI Express FD has one or two CAN FD channels, depending on the model. A galvanic isolation of the CAN ports protects the electronics of the card and the respective computer against disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated with ambient temperatures in a range of -40 to +85 °C. Such boards run an extented version of the CAN-FD IP running into USB CAN-FD interfaces from PEAK-System, so this patch adds several new commands and their corresponding data types to the PEAK CAN-FD common definitions header file too. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.