aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/can (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-08-13Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-0/+7
Conflicts: drivers/net/netxen/netxen_nic_main.c
2009-08-13can: fix oops caused by wrong rtnl newlink usageOliver Hartkopp1-0/+7
For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created with the ip tool ... The invocation of 'ip link add type can' lead to an oops as the standard rtnl newlink function was called: http://bugzilla.kernel.org/show_bug.cgi?id=13954 This patch adds a private newlink function for the CAN device driver interface that unconditionally returns -EOPNOTSUPP. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: Patrick McHardy <kaber@trash.net> CC: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-23Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller2-3/+6
Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
2009-07-23can: sja1000: Add support for the new 4 channel EMS CPC-PCI cardsSebastian Haas2-47/+112
This patch adds support to the ems_pci driver for the new, v2, 4 channel CPC-PCI/PCIe/104P CAN cards from EMS Dr. Thomas Wuensche. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20can: switch carrier on if device was stopped while in bus-off stateWolfgang Grandegger1-0/+4
This patch fixes a problem when a device is stopped while in the bus-off state. Then the carrier remains off forever. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@skynet.be> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20can: restart device even if dev_alloc_skb() failsWolfgang Grandegger1-2/+2
If dev_alloc_skb() failed in can_restart(), the device was left behind in the bus-off state. This patch restarts the device nevertheless. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20can: sja1000: remove duplicated includesWolfgang Grandegger1-1/+0
Remove duplicated #include('s) in drivers/net/can/sja1000/sja1000.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy1-1/+1
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23can: let SJA1000 driver depend on HAS_IOMEMHeiko Carstens1-1/+1
Fixes this compile error on s390: drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_read_reg': drivers/net/can/sja1000/sja1000_platform.c:42: error: implicit declaration of function 'ioread8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_write_reg': drivers/net/can/sja1000/sja1000_platform.c:47: error: implicit declaration of function 'iowrite8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_probe': drivers/net/can/sja1000/sja1000_platform.c:79: error: implicit declaration of function 'ioremap_nocache' Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10can: sja1000_of_platform: fix build problems with printk formatWolfgang Grandegger1-4/+6
According to "Documentation/printk-formats.txt", if the type is dependent on a config option for its size, like resource_size_t, we should use a format specifier of its largest possible type and explicitly cast to it. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01can: sja1000: generic OF platform bus driverWolfgang Grandegger3-0/+243
This patch adds a generic driver for SJA1000 chips on the OpenFirmware platform bus found on embedded PowerPC systems. You need a SJA1000 node definition in your flattened device tree source (DTS) file similar to: can@3,100 { compatible = "nxp,sja1000"; reg = <3 0x100 0x80>; interrupts = <2 0>; interrupt-parent = <&mpic>; nxp,external-clock-frequency = <16000000>; }; See also Documentation/powerpc/dts-bindings/can/sja1000.txt. CC: devicetree-discuss@ozlabs.org Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01can: sja1000: stop misusing member base_addr of struct net_deviceWolfgang Grandegger5-98/+95
As discussed on the netdev mailing list, the member "base_addr" of "struct net_device" should not be (mis)used to store the virtual address to the SJA1000 register area. According to David Miller, it's only use is to allow ISA and similar primitive bus devices to have their I/O ports changed via ifconfig. The virtual address is now stored in the private data structure of the SJA1000 device and the callback functions use "struct sja1000_priv" instead of the unneeded "struct net_device". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01can: some fixes and cleanups to the initial device driver interfaceWolfgang Grandegger3-5/+2
This patch fixes a few errors sneaked into the initial version of the device driver interface. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18The patch adds support for the PCI cards: PCIcan and PCIcanx (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com).Wolfgang Grandegger3-0/+419
Signed-off-by: Per Dalen <per.dalen@cnw.se> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18can: SJA1000 driver for EMS PCI cardsWolfgang Grandegger3-0/+337
The patch adds support for the one or two channel CPC-PCI and CPC-PCIe cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Markus Plessing <plessing@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18can: SJA1000 generic platform bus driverWolfgang Grandegger3-0/+175
This driver adds support for the SJA1000 chips connected to the "platform bus", which can be found on various embedded systems. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18can: Driver for the SJA1000 CAN controllerWolfgang Grandegger5-0/+832
This patch adds the generic Socket-CAN driver for the Philips SJA1000 full CAN controller. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18can: CAN Network device driver and Netlink interfaceWolfgang Grandegger3-0/+685
The CAN network device driver interface provides a generic interface to setup, configure and monitor CAN network devices. It exports a set of common data structures and functions, which all real CAN network device drivers should use. Please have a look to the SJA1000 or MSCAN driver to understand how to use them. The name of the module is can-dev.ko. Furthermore, it adds a Netlink interface allowing to configure the CAN device using the program "ip" from the iproute2 utility suite. For further information please check "Documentation/networking/can.txt" Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17vcan: whitespace fixesOliver Hartkopp1-10/+10
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16vcan: convert to net_device_opsOliver Hartkopp1-1/+5
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CAN]: Add virtual CAN netdevice driverOliver Hartkopp3-0/+199
This patch adds the virtual CAN bus (vcan) network driver. The vcan device is just a loopback device for CAN frames, no real CAN hardware is involved. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.