aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/bcm_sf2.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-06drivers: net: dsa: remove duplicate includesPravin Shedge1-1/+0
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHYFlorian Fainelli1-1/+1
The PHY on BCM7278 has an additional bit that needs to be cleared: IDDQ_GLOBAL_PWR, without doing this, the PHY remains stuck in reset out of suspend/resume cycles. Fixes: 0fe9933804eb ("net: dsa: bcm_sf2: Add support for BCM7278 integrated switch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Pass a port to get_tag_protocol()Florian Fainelli1-1/+2
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29net: dsa: b53: Export b53_configure_vlan()Florian Fainelli1-40/+1
bcm_sf2 and b53 replicate the same operations: clear all VLANs and set their ports to the default VLAN tag (1 for these devices) so export the b53 function doing just that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28net: dsa: use dsa_is_user_port everywhereVivien Didelot1-5/+4
Most of the DSA code still check ds->enabled_port_mask directly to inspect a given port type instead of using the provided dsa_is_user_port helper. Change this. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-23net: dsa: bcm_sf2: Add support for IPv6 CFP rulesFlorian Fainelli1-0/+1
Inserting IPv6 CFP rules complicates the code a little bit in that we need to insert two rules side by side and chain them to match a full IPv6 tuple (src, dst IPv6 + port + protocol). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: split dsa_port's netdev memberVivien Didelot1-3/+3
The dsa_port structure has a "netdev" member, which can be used for either the master device, or the slave device, depending on its type. It is true that today, CPU port are not exposed to userspace, thus the port's netdev member can be used to point to its master interface. But it is still slightly confusing, so split it into more explicit "master" and "slave" members inside an anonymous union. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net: dsa: bcm_sf2: Turn on ACB at the switch levelFlorian Fainelli1-0/+30
Turn on the out of band Advanced Congestion Buffering (ACB) mechanism at the switch level now that we have properly established the queue mapping between the switch egress queues and the SYSTEMPORT egress queues. This allows the switch to correctly backpressure the host system when one of its queue drops below the configured thresholds. This is also helping achieve so called "lossless" behavior by adapting the TX interrupt pacing to the actual speed and capacity of the switch port. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01Revert "net: dsa: bcm_sf2: Defer port enabling to calling port_enable"Florian Fainelli1-3/+6
This reverts commit e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") because this now makes an unbind followed by a bind to fail connecting to the ingrated PHY. What this patch missed is that we need the PHY to be enabled with bcm_sf2_gphy_enable_set() before probing it on the MDIO bus. This is correctly done in the ops->setup() function, but by the time ops->port_enable() runs, this is too late. Upon unbind we would power down the PHY, and so when we would bind again, the PHY would be left powered off. Fixes: e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: dsa: use dedicated CPU portVivien Didelot1-3/+3
Each port in DSA has its own dedicated CPU port currently available in its parent switch's ds->ports[port].cpu_dp. Use it instead of getting the unique tree CPU port, which will be deprecated soon. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Utilize b53_{enable, disable}_portFlorian Fainelli1-24/+2
Export b53_{enable,disable}_port and use these two functions in bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions cannot be used without wrapping because we need to manage additional switch integration details (PHY, Broadcom tag etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Export b53_imp_vlan_setup()Florian Fainelli1-22/+1
bcm_sf2 and b53 do exactly the same thing, so share that piece. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Move EEE functions to b53Florian Fainelli1-60/+6
Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared code amongst Gigabit capable switch, only 5325 and 5365 are too old to support that. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Move Broadcom header setup to b53Florian Fainelli1-41/+2
The code to enable Broadcom tags/headers is largely switch independent, and in preparation for enabling it for multiple devices with b53, move the code we have in bcm_sf2.c to b53_common.c Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Defer port enabling to calling port_enableFlorian Fainelli1-6/+3
There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05net: dsa: bcm_sf2: Configure IMP port TC2QOS mappingFlorian Fainelli1-0/+9
Even though TC2QOS mapping is for switch egress queues, we need to configure it correclty in order for the Broadcom tag ingress (CPU -> switch) queue selection to work correctly since there is a 1:1 mapping between switch egress queues and ingress queues. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05net: dsa: bcm_sf2: Advertise number of egress queuesFlorian Fainelli1-1/+4
The switch supports 8 egress queues per port, so indicate that such that net/dsa/slave.c::dsa_slave_create can allocate the right number of TX queues. While at it use SF2_NUM_EGRESS_QUEUE as a define for the number of queues we support. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278Florian Fainelli1-0/+4
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set, fix that. Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29net: dsa: make some structures constBhumika Goyal1-1/+1
Make these const as they are not modified anywhere. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for vlan dump from DSA's driversArkadi Sharshevsky1-1/+0
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove prepare phase for FDBArkadi Sharshevsky1-1/+0
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03net: dsa: bcm_sf2: dst in not an arrayVivien Didelot1-2/+2
It's been a while now since ds->dst is not an array anymore, but a simple pointer to a dsa_switch_tree. Fortunately, SF2 does not support multi-chip and thus ds->index is always 0. This patch substitutes 'ds->dst[ds->index].' with 'ds->dst->'. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: dsa: rename switch EEE opsVivien Didelot1-6/+6
To avoid confusion with the PHY EEE settings, rename the .set_eee and .get_eee ops to respectively .set_mac_eee and .get_mac_eee. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: dsa: remove PHY device argument from .set_eeeVivien Didelot1-1/+0
The DSA switch operations for EEE are only meant to configure a port's MAC EEE settings. The port's PHY EEE settings are accessed by the DSA layer and must be made available via a proper PHY driver. In order to reduce this confusion, remove the phy_device argument from the .set_eee operation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: dsa: call phy_init_eee in DSA layerVivien Didelot1-8/+1
All DSA drivers are calling phy_init_eee if eee_enabled is true. Move up this statement in the DSA layer to simplify the DSA drivers. qca8k does not require to cache the ethtool_eee structures from now on. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: dsa: bcm_sf2: remove unneeded supported flagsVivien Didelot1-4/+0
The SF2 driver is masking the supported bitfield of its private copy of the ports' ethtool_eee structures. It is used nowhere, thus remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23net: dsa: bcm_sf2: Remove special handling of "internal" phy-modeFlorian Fainelli1-11/+5
The PHY library now supports an "internal" phy-mode, thus making our custom parsing code now unnecessary. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Remove master_netdev and use dst->cpu_dp->netdevFlorian Fainelli1-2/+2
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include switchdev.h only onceVivien Didelot1-1/+0
DSA drivers and core use switchdev. Include switchdev.h only once, in the dsa.h public header, so that inclusion in DSA drivers or forward declarations of switchdev structures in not necessary anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot1-2/+2
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Add support for port mirroringFlorian Fainelli1-0/+2
We can use b53_mirror_add and b53_mirror_del because the Starfighter 2 is register compatible in that specific case. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Add support for ethtool::rxnfcFlorian Fainelli1-0/+14
Add support for configuring classification rules using the ethtool::rxnfc API. This is useful to program the switch's CFP/TCAM to redirect specific packets to specific ports/queues for instance. For now, we allow any kind of IPv4 5-tuple matching. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Configure traffic classes to queue mappingFlorian Fainelli1-0/+9
By default, all traffic goes to queue 0, re-configure the traffic classes to quality of service mapping such that priority X maps to queue X, where X is from 0 through 7. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: dsa: bcm_sf2: Allow non-IMP ports to have Broadcom tags enabledFlorian Fainelli1-0/+7
Parse the "brcm,use-bcm-hdr" boolean property during ports identification to fill a bitmask of ports that should have Broadcom tags enabled. This is needed in some configurations where per-packet metadata can be exchanged using Broadcom tags between the switch and an on-chip acceleration device. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: dsa: bcm_sf2: Move code enabling Broadcom tagsFlorian Fainelli1-27/+34
In preparation for enabling Broadcom tags on different ports based on configuration information, dedicate a function that is responsible for enabling Broadcom tags for a given port and update the IMP port setup to call it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: dsa: bcm_sf2: Add support for BCM7278 integrated switchFlorian Fainelli1-8/+48
Add support for the integrated switch found on BCM7278: - core_reg_align is set to 1, to force a translation into the target address space which is 8 bytes aligned - an alternate SWITCH_REG layout is provided since registers are largely bit/masks compatible but have different offsets - conditional for all CORE_STS_OVERRIDE_{IMP,GMII_P} since those got moved way out of the traditional register space Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: dsa: bcm_sf2: Prepare for different register layoutsFlorian Fainelli1-6/+51
In preparation for supporting a new device with a slightly different register layout, affecting the SWITCH_REG and SWITCH_CORE address spaces, perform a few preparatory steps: - allow matching the compatible string against a data description - convert the SWITCH_REG register accesses into an indirection table - prepare for supporting a SWITCH_CORE register alignment requirement Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Make dsa_switch_ops constFlorian Fainelli1-1/+1
Now that we have properly encapsulated and made drivers utilize exported functions, we can switch dsa_switch_ops to be a annotated with const. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: bcm_sf2: Declare our own dsa_switch_opsFlorian Fainelli1-22/+33
Utilize the b53 exported functions to fill our bcm_sf2_ops structure, also making it clear what we utilize and what we specifically override. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: dsa: bcm_sf2: Utilize nested MDIO read/writeFlorian Fainelli1-2/+2
We are implementing a MDIO bus which is behind another one, so use the nested version of the accessors to get lockdep annotations correct. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: dsa: bcm_sf2: Do not clobber b53_switch_opsFlorian Fainelli1-0/+7
We make the bcm_sf2 driver override ds->ops which points to b53_switch_ops since b53_switch_alloc() did the assignent. This is all well and good until a second b53 switch comes in, and ends up using the bcm_sf2 operations. Make a proper local copy, substitute the ds->ops pointer and then override the operations. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-24net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link changeFlorian Fainelli1-0/+4
In case the link change and EEE is enabled or disabled, always try to re-negotiate this with the link partner. Fixes: 450b05c15f9c ("net: dsa: bcm_sf2: add support for controlling EEE") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22net: dsa: bcm_sf2: Do not rely on kexec_in_progressFlorian Fainelli1-2/+3
After discussing with Eric, it turns out that, while using kexec_in_progress is a nice optimization, which prevents us from always powering on the integrated PHY, let's just turn it on in the shutdown path. This removes a dependency on kexec_in_progress which, according to Eric should not be used by modules Fixes: 2399d6143f85 ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernelsFlorian Fainelli1-0/+14
For a kernel that is being kexec'd we re-enable the integrated GPHY in order for the subsequent MDIO bus scan to succeed and properly bind to the bcm7xxx PHY driver. If we did not do that, the GPHY would be shut down by the time the MDIO driver is probing the bus, and it would fail to read the correct PHY OUI and therefore bind to an appropriate PHY driver. Later on, this would cause DSA not to be able to successfully attach to the PHY, and the interface would not be created at all. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: dsa: bcm_sf2: Fix module autoload for OF registrationJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias alias: platform:brcm-sf2 After this patch: $ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias alias: platform:brcm-sf2 alias: of:N*T*Cbrcm,bcm7445-switch-v4.0C* alias: of:N*T*Cbrcm,bcm7445-switch-v4.0 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net: dsa: bcm_sf2: Fix non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/net/dsa/bcm_sf2.c:963:19: warning: symbol 'bcm_sf2_io_ops' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net: dsa: bcm_sf2: Get VLAN_PORT_MASK from b53_deviceFlorian Fainelli1-1/+1
While migrating the bcm_sf2 driver to use b53_common, we left a small piece untouched where we kept our local copy of the per-port port_vlan_ctl bitmask value. This value is now maintained by b53_device so we need to use it instead of our local (and now stale) copy of it. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: bcm_sf2: Utilize mask clear/set helpers in bcm_sf2_intr_disableFlorian Fainelli1-4/+2
And while at it, remove the unecessary writing of zeroes to the CPU_MASK_CLEAR register since it has no functional use. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: bcm_sf2: Remove duplicate codeFlorian Fainelli1-756/+16
Now that we are using b53_common for most VLAN, FDB and bridge operations, delete all the redundant code that we had in bcm_sf2.c to keep only the integration specific logic that we have to deal with: power management, link management and the external interfaces (RGMII, MDIO). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.