aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/dsa_loop.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-04net: phy: fixed-phy: Drop GPIO from fixed_phy_add()Linus Walleij1-1/+1
All users of the fixed_phy_add() pass -1 as GPIO number to the fixed phy driver, and all users of fixed_phy_register() pass -1 as GPIO number as well, except for the device tree MDIO bus. Any new users should create a proper device and pass the GPIO as a descriptor associated with the device so delete the GPIO argument from the calls and drop the code looking requesting a GPIO in fixed_phy_add(). In fixed phy_register(), investigate the "fixed-link" node and pick the GPIO descriptor from "link-gpios" if this property exists. Move the corresponding code out of of_mdio.c as the fixed phy code anyways requires OF to be in use. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25net: dsa: dsa_loop: Make dynamic debugging helpfulFlorian Fainelli1-14/+17
Remove redundant debug prints from phy_read/write since we can trace those calls through trace events. Enhance dynamic debug prints to print arguments which helps figuring how what is going on at the driver level with higher level configuration interfaces. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27net: dsa: loop: Hook PHY statisticsFlorian Fainelli1-2/+3
We just return the same statistics through ethtool_get_stats() and ethtool_get_phy_stats() for simplicity since this is just a mock-up driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27net: dsa: Pass stringset to ethtool operationsFlorian Fainelli1-2/+9
Up until now we largely assumed that we were interested in ETH_SS_STATS type of strings for all ethtool operations, this is about to change with the introduction of additional string sets, e.g: ETH_SS_PHY_STATS. Update all functions to take an appropriate stringset argument and act on it when it is different than ETH_SS_STATS for now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04dsa: Pass the port to get_sset_count()Andrew Lunn1-1/+1
By passing the port, we allow different ports to have different statistics. This is useful since some ports have SERDES interfaces with their own statistic counters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: remove trans argument from vlan opsVivien Didelot1-5/+4
The DSA switch VLAN ops pass the switchdev_trans structure down to the drivers, but no one is using them and they aren't supposed to anyway. Remove the trans argument from VLAN prepare and add operations. At the same time, fix the following checkpatch warning: WARNING: line over 80 characters #74: FILE: drivers/net/dsa/dsa_loop.c:177: + const struct switchdev_obj_port_vlan *vlan) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Pass a port to get_tag_protocol()Florian Fainelli1-1/+2
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: dsa: dsa_loop: remove .set_addrVivien Didelot1-8/+0
The .set_addr function does nothing, remove the dsa_loop implementation before getting rid of it completely in DSA. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2017-09-03net: dsa: loop: Do not unregister invalid fixed PHYFlorian Fainelli1-1/+1
During error injection it was possible to crash in dsa_loop_exit() because of an attempt to unregister an invalid PHY. We actually want to the driver probing in dsa_loop_init() even though fixed_phy_register() may return an error to exercise how DSA deals with such cases, but we should not be crashing during driver removal. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net: dsa: make dsa_switch_ops constBhumika Goyal1-1/+1
Make these structures const as they are only stored in the ops field of a dsa_switch structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Remove support for vlan dump from DSA's driversArkadi Sharshevsky1-38/+0
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net: dsa: loop: Implement ethtool statisticsFlorian Fainelli1-2/+77
When a DSA driver implements ethtool statistics, we also override the master network device's ethtool statistics with the CPU port's statistics and this has proven to be a possible source of bugs in the past. Enhance the dsa_loop.c driver to provide statistics under the forme of ok/error reads and writes from the per-port PHY read/writes. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net: dsa: loop: Inline unregister_fixed_phys()Florian Fainelli1-10/+5
This is a simple function that only gets used in the driver's remove function, inline it there. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: remove dev arg of dsa_register_switchVivien Didelot1-1/+1
The current dsa_register_switch function takes a useless struct device pointer argument, which always equals ds->dev. Drivers either call it with ds->dev, or with the same device pointer passed to dsa_switch_alloc, which ends up being assigned to ds->dev. This patch removes the second argument of the dsa_register_switch and _dsa_register_switch functions. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: use switchdev_obj_dump_cb_t everywhereVivien Didelot1-1/+1
Now that the DSA public header includes switchdev.h, use the provided switchdev_obj_dump_cb_t typedef for the object dump callback. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include switchdev.h only onceVivien Didelot1-1/+0
DSA drivers and core use switchdev. Include switchdev.h only once, in the dsa.h public header, so that inclusion in DSA drivers or forward declarations of switchdev structures in not necessary anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08net: dsa: loop: Check for memory allocation failureChristophe Jaillet1-0/+3
If 'devm_kzalloc' fails, a NULL pointer will be dereferenced. Return -ENOMEM instead, as done for some other memory allocation just a few lines above. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06net: dsa: loop: Initialize err in dsa_loop_vlan_dumpFlorian Fainelli1-1/+1
Dan's static checker reported the following: drivers/net/dsa/dsa_loop.c:223 dsa_loop_port_vlan_dump() error: uninitialized symbol 'err'. which could happen if we do hit the continue statement for each iteration of the loop. Initialize err to 0 here. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06net: dsa: loop: Fix uninitialized pvid variableFlorian Fainelli1-1/+1
Dan's static analyzer reported the following: drivers/net/dsa/dsa_loop.c:181 dsa_loop_port_vlan_del() error: XXX uninitialized symbol 'pvid'. we were missing the assignment of pvid to ps->vid, so add that. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-01net: dsa: Mock-up driverFlorian Fainelli1-0/+328
This patch adds support for a DSA mock-up driver which essentially does the following: - registers/unregisters 4 fixed PHYs to the slave network devices - uses eth0 (configurable) as the master netdev - registers the switch as a fixed MDIO device against the fixed MDIO bus at address 31 - includes dynamic debug prints for dsa_switch_ops functions that can be enabled to get call traces This is a good way to test modular builds as well as exercise the DSA APIs without requiring access to real hardware. This does not test the data-path, although this could be added later on. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.