aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/mv88e6xxx/serdes.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-01net: dsa: mv88e6xxx: centralize SERDES IRQ handlingVivien Didelot1-142/+0
The .serdes_irq_setup are all following the same steps: get the SERDES lane, get the IRQ mapping, request the IRQ, then enable it. So do the .serdes_irq_free implementations: get the SERDES lane, disable the IRQ, then free it. This patch removes these operations in favor of generic functions. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_statusVivien Didelot1-21/+38
Introduce a new .serdes_irq_status operation to prepare the abstraction of IRQ thread from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_enableVivien Didelot1-44/+29
Introduce a new .serdes_irq_enable operation to prepare the abstraction of IRQ enabling from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: pass lane to .serdes_powerVivien Didelot1-19/+13
Now the first step of all .serdes_power implementations is getting the lane mapping. Since we have an operation for that, call it in the wrapper and pass the lane down to the .serdes_power operation. This also allows to avoid querying the SERDES lane twice in mv88e6xxx_port_set_cmode. At the same time provide mv88e6xxx_serdes_power_{up,down} helpers and prefer up/down instead of on/off as in the documentation. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: merge mv88e6352_serdes_power_setVivien Didelot1-14/+4
The mv88e6352_serdes_power_set helper is only used at one place, in mv88e6352_serdes_power. Keep it simple and merge the two functions together. Use mv88e6xxx_serdes_get_lane instead of mv88e6352_port_has_serdes to avoid moving code. No functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: implement mv88e6352_serdes_get_laneVivien Didelot1-1/+10
Even though 88E6352 has no dedicated lane for SERDES interfaces, it uses a similar code as the other .serdes_get_lane implementations to check the port's CMODE and ensure that SERDES operations are doable. For consistency, implement mv88e6352_serdes_get_lane for the 88E6352 and similar switches which simply returns an unused 0xff lane address. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: simplify .serdes_get_laneVivien Didelot1-97/+55
Because the mapping between a SERDES interface and its lane is static, we don't need to stick with negative error codes actually and we can simply return 0 if there is no lane, just like the IRQ mapping. This way we can keep a simple and intuitive API using unsigned lane numbers while simplifying the implementations with single return statements. Last but not least, fix the reverse chrismas tree in mv88e6390x_serdes_get_lane. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_mappingVivien Didelot1-6/+20
Introduce a new .serdes_irq_mapping operation to prepare the abstraction of IRQ mapping from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: fix SERDES IRQ mappingVivien Didelot1-10/+4
The current mv88e6xxx SERDES code checks for negative error code from irq_find_mapping, while this function returns an unsigned integer. This patch removes this dead code and simply returns 0 is no IRQ is found. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: check errors in mv88e6352_serdes_irq_linkVivien Didelot1-2/+7
The mv88e6352_serdes_irq_link helper is not checking for any error that may occur during hardware accesses. Worst, the "up" boolean is set from the potentially unused "status" variable, if read operations failed. As done in mv88e6390_serdes_irq_link_sgmii, return right away and do not call dsa_port_phylink_mac_change if an error occurred. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: dsa: mv88e6xxx: get serdes lane after lockVivien Didelot1-2/+4
This is a follow-up patch for commit 17deaf5cb37a ("net: dsa: mv88e6xxx: create serdes_get_lane chip operation"). The .serdes_get_lane implementations access the CMODE of a port, even though it is cached at the moment, it is safer to call them after the mutex is locked, not before. At the same time, check for an eventual error and return IRQ_DONE, instead of blindly ignoring it. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: rename port cmode macroMarek Behún1-24/+24
This is a cosmetic update. We are removing the last underscore from macros MV88E6XXX_PORT_STS_CMODE_100BASE_X and MV88E6XXX_PORT_STS_CMODE_1000BASE_X. The 2500base-x version does not have that underscore. Also PHY_INTERFACE_MODE_ macros do not have it there. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: simplify SERDES code for Topaz and PeridotMarek Behún1-77/+28
By adding an additional serdes_get_lane implementation (for Topaz), we can merge the implementations of other SERDES functions (powering and IRQs). We can skip checking port numbers, since the serdes_get_lane() methods inform if there is no lane on a port or if the lane cannot be used for given cmode. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: create serdes_get_lane chip operationMarek Behún1-85/+112
Create a serdes_get_lane() method in the mv88e6xxx operations structure. Use it instead of calling the different implementations. Also change the methods so that their return value is used only for error. The lane number is put into a place referred to by a pointer given as argument. If the port does not have a lane, return -ENODEV. Lanes are phy addresses, so use u8 as their type. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handlerMarek Behún1-2/+21
The mv88e6390_serdes_irq_link_sgmii IRQ handler reads the SERDES PHY status register to determine speed, among other things. If cmode of the port is set to 2500base-x, though, the PHY still reports 1000 Mbps (the PHY register itself does not differentiate between 1000 Mbps and 2500 Mbps - it thinks it is running at 1000 Mbps, although clock is 2.5x faster). Look at the cmode and set SPEED_2500 if cmode is set to 2500base-x. Also tell mv88e6xxx_port_setup_mac the PHY interface mode corresponding to current cmode in terms of phy_interface_t. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-23net: dsa: mv88e6xxx: introduce helpers for handling chip->reg_lockRasmus Villemoes1-12/+12
This is a no-op that simply moves all locking and unlocking of ->reg_lock into trivial helpers. I did that to be able to easily add some ad hoc instrumentation to those helpers to get some information on contention and hold times of the mutex. Perhaps others want to do something similar at some point, so this frees them from doing the 'sed -i' yoga, and have a much smaller 'git diff' while fiddling. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-04net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYsHeiner Kallweit1-11/+38
If an external PHY is connected via SGMII and uses in-band signalling then the auto-negotiated values aren't propagated to the port, resulting in a broken link. See discussion in [0]. This patch adds this propagation. We need to call mv88e6xxx_port_setup_mac(), therefore export it from chip.c. Successfully tested on a ZII DTU with 88E6390 switch and an Aquantia AQCS109 PHY connected via SGMII to port 9. [0] https://marc.info/?t=155130287200001&r=1&w=2 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: dsa: mv88e6xxx: Fix serdes irq setup going recursiveAndrew Lunn1-1/+1
Duec to a typo, mv88e6390_serdes_irq_setup() calls itself, rather than mv88e6390x_serdes_irq_setup(). It then blows the stack, and shortly after the machine blows up. Fixes: 2defda1f4b91 ("net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390X") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390XAndrew Lunn1-7/+19
The 6390X family has 8 SERDES interfaces. When ports 9 and 10 are not using all their SERDES interfaces, the unused ones can be assigned to ports 2-8. Add support for interrupts from SERDES interfaces connected to these lower ports. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: dsa: mv88e6xxx: Add SERDES phydev_link_change for 6352Andrew Lunn1-0/+105
The 6352 family has one SERDES interface, which can be used by either port 4 or port 5. Add interrupt support for the SERDES interface, and report when the link status changes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: dsa: mv88e6xxx: bitwise vs logical bugDan Carpenter1-2/+2
We are trying to test if these flags are set but there are some && vs & typos. Fixes: efd1ba6af93f ("net: dsa: mv88e6xxx: Add SERDES phydev_mac_change up for 6390") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Re-setup interrupts on CMODE change.Andrew Lunn1-1/+3
When a port changes CMODE, the SERDES interface being used can change. Disable interrupts for the old SERDES interface, and enable interrupts on the new. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add SERDES phydev_mac_change up for 6390Andrew Lunn1-0/+179
phylink wants to know when the MAC layers notices a change in the link. For the 6390 family, this is a change in the SERDES state. Add interrupt support for the SERDES interface used to implement SGMII/1000Base-X/2500Base-X. This is currently limited to ports 9 and 10. Support for the 10G SERDES and other ports will be added later, building on this basic framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Cache the port cmodeAndrew Lunn1-38/+7
The ports CMODE indicates the type of link between the MAC and the PHY. It is used often in the SERDES code. Rather than read it each time, cache its value. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: 2500Base-X uses the 1000Base-X SERDESAndrew Lunn1-1/+1
The 6390 has three different SERDES interface types. 2500Base-X is implemented by the SGMII/1000Base-X SERDES. So power on/off the correct SERDES. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add serdes register read/write helperAndrew Lunn1-10/+25
Add a helper for accessing SERDES registers of the 6390 family. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Rename sgmii/10g power functionsAndrew Lunn1-6/+8
There is a need to add more functions manipulating the SERDES interfaces. Cleanup the namespace. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: 6390 vs 6390X SERDES supportAndrew Lunn1-1/+50
The 6390 has two SERDES interfaces, used by ports 9 and 10. The 6390X has eight SERDES interfaces. These allow ports 9 and 10 to do 10G. Or if lower speeds are used, some of the SERDES interfaces can be used by ports 2-8 for 1000Base-X. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Refactor SERDES lane codeAndrew Lunn1-81/+114
The 6390 family has 8 SERDES lanes. What ports use these lanes depends on how ports 9 and 10 are configured. If 9 and 10 does not make use of a line, one of the lower ports can use it. Add a function to return the lane a port is using, if any, and simplify the code to power up/down the lane. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: mv88e6xxx: 88E6141/6341 SERDES supportMarek Behún1-0/+20
The 88E6141/6341 switches (also known as Topaz) have 1 SGMII lane, which can be configured the same way as the SERDES lane on 88E6390. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: dsa: mv88e6xxx: Keep ATU/VTU violation statisticsAndrew Lunn1-6/+9
Count the numbers of various ATU and VTU violation statistics and return them as part of the ethtool -S statistics. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07net: dsa: mv88e6xxx: fix boolreturn.cocci warningsFengguang Wu1-3/+3
drivers/net/dsa/mv88e6xxx/serdes.c:66:9-10: WARNING: return of 0/1 in function 'mv88e6352_port_has_serdes' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: eb755c3f6b7d ("net: dsa: mv88e6xxx: Add helper to determining if port has SERDES") CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net: dsa: mv88e6xxx: Get mv88e6352 SERDES statisticsAndrew Lunn1-0/+84
Add support for reading the SERDES statistics of the mv88e8352, using the standard ethtool -S option. The SERDES interface can be mapped to either port 4 or 5, so only return statistics on those ports, if the SERDES interface is in use. The counters are reset on read, so need to be accumulated. Add a per port structure to hold the stats counters. The 6352 only has a single SERDES interface and so only one port will using the newly added array. However the 6390 family has as many SERDES interfaces as ports, each with statistics counters. Also, PTP has a number of counters per port which will also need accumulating. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net: dsa: mv88e6xxx: Add helper to determining if port has SERDESAndrew Lunn1-5/+17
Refactor the existing code. This helper will be used for SERDES statistics. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: dsa: mv88e6xxx: fix error code in mv88e6390_serdes_power()Dan Carpenter1-1/+1
We're accidentally returning the wrong variable. "cmode" is uninitialized at this point so it causes a static checker warning. Fixes: 6335e9f2446b ("net: dsa: mv88e6xxx: mv88e6390X SERDES support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: mv88e6xxx: prefix Port Status macrosVivien Didelot1-19/+19
For implicit namespacing and clarity, prefix the common Port Status Register macros with MV88E6XXX_PORT_STS and the ones which differ between implementations with a chosen reference model (e.g. MV88E6352_PORT_STS_EEE.) Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04net: dsa: mv88e6xxx: rename chip headerVivien Didelot1-1/+1
The mv88e6xxx.h is meant to contains the chip structures and data. Rename it to chip.h, as for other source/header pairs of the driver. At the same time, ensure that relative header inclusions are separated by a newline and sorted alphabetically. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26net: dsa: mv88e6xxx: mv88e6390X SERDES supportAndrew Lunn1-0/+154
The mv88e6390X family has 8 SERDES lanes. These can be used for 2 10Gbps ports, ports 9 or 10. If these ports are used at slower speeds, the SERDES lanes become available for other ports for 1000Base-X. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26net: dsa: mv88e6xxx: Refactor mv88e6352 SERDES code into an opAndrew Lunn1-0/+75
The mv88e6390 family has a different SERDES implementation. Refactor the mv88e6352 code into an ops function, so we can later add the mv88e6390 code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.