linux-dev - Linux kernel development work

Age	Commit message (Collapse)	Author	Files	Lines
2019-02-19	net: dsa: qca8k: Enable delay for RGMII_ID mode	Vinod Koul	1	-0/+1
	RGMII_ID specifies that we should have internal delay, so resurrect the delay addition routine but under the RGMII_ID mode. Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode") Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23	net: dsa: qca8k: Allow overwriting CPU port setting	Michal Vokáč	1	-0/+1
	Implement adjust_link function that allows to overwrite default CPU port setting using fixed-link device tree subnode. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23	net: dsa: qca8k: Force CPU port to its highest bandwidth	Michal Vokáč	1	-2/+4
	By default autonegotiation is enabled to configure MAC on all ports. For the CPU port autonegotiation can not be used so we need to set some sensible defaults manually. This patch forces the default setting of the CPU port to 1000Mbps/full duplex which is the chip maximum capability. Also correct size of the bit field used to configure link speed. Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01	net: dsa: call phy_init_eee in DSA layer	Vivien Didelot	1	-1/+0
	All DSA drivers are calling phy_init_eee if eee_enabled is true. Move up this statement in the DSA layer to simplify the DSA drivers. qca8k does not require to cache the ethtool_eee structures from now on. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29	net: dsa: qca8k: use dsa_port's bridge pointer	Vivien Didelot	1	-1/+0
	Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16	net-next: dsa: add new driver for qca8xxx family	John Crispin	1	-0/+185
	This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>