aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-09-08e1000: fix Tx hangs by disabling 64-bit DMAJesse Brandeburg1-70/+92
Several users report issues with 32-bit adapters when plugged into PCI slots in machines with >= 4GB ram. In particular AMD systems with HyperTransport to PCI bridges seem to trigger the issue, but it isn't limited to only them. This issue is not easily reproducible here, yet still continues to occur in the field. For e1000 on PCI devices, just disable DMA addresses over the 4GB boundary when in PCI (not PCI-X) mode, to prevent the issue from continuing to pop up. The performance impact for this is negligible. The code was refactored to move the init of the hw struct to its own function. This allows the init to be called very early in probe, which then allows using hw-> members for this fix. A slight refactor to the DMA mask code was done for minor correctness based on the instructions in DMA-API-HOWTO. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02drivers/net: avoid some skb->ip_summed initializationsEric Dumazet1-1/+2
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25drivers/net: Remove address use from assignments of function pointersJoe Perches1-3/+3
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-08e100/e1000*/igb*/ixgb*: Add missing read memory barrierJeff Kirsher1-0/+3
Based on patches from Sonny Rao and Milton Miller... Combined the patches to fix up clean_tx_irq and clean_rx_irq. The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. The bug can manifest as a data integrity issue (bad payload data) or as a BUG in skb_pull(). This was a nasty bug to hunt down, if people agree with the fix I think it's a candidate for stable. Previously Submitted to e1000-devel only for ixgbe http://marc.info/?l=e1000-devel&m=126593062701537&w=3 We've now seen this problem hit with other device drivers (e1000e mostly) So I'm resubmitting with fixes for other Intel Device Drivers with similar issues. CC: Milton Miller <miltonm@bga.com> CC: Anton Blanchard <anton@samba.org> CC: Sonny Rao <sonnyrao@us.ibm.com> CC: stable <stable@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26e1000: use netif_<level> instead of netdev_<level>Emil Tantilov3-61/+70
This patch restores the ability to set msglvl through ethtool. The issue was introduced by: commit 675ad47375c76a7c3be4ace9554d92cd55518ced Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19e1000: allow option to limit number of descriptors down to 48 per ringAlexander Duyck1-2/+2
This change makes it possible to limit the number of descriptors down to 48 per ring. The reason for this change is to address a variation on hardware errata 10 for 82546GB in which descriptors will be lost if more than 32 descriptors are fetched and the PCI-X MRBC is 512. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-13e1000: Fix message logging defectJoe Perches1-9/+8
commit 675ad47375c76a7c3be4ace9554d92cd55518ced removed the capability to use ethtool.set_msglevel to control the types of messages emitted by the driver. That commit should probably be reverted. If not, then this patch fixes a message logging defect introduced by converting a printk without KERN_<level> to e_info. This also reduces text by about 200 bytes. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14ixgb and e1000: Use new function for copybreak testsJoe Perches1-20/+27
There appears to be an off-by-1 defect in the maximum packet size copied when copybreak is speified in these modules. The copybreak module params are specified as: "Maximum size of packet that is copied to a new buffer on receive" The tests are changed from "< copybreak" to "<= copybreak" and moved into new static functions for readability. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14e1000: cleanup unused parametersJesse Brandeburg1-8/+0
During the cleanup pass after the removal of e1000e hardware from e1000 some parameters were missed. Remove them because it is just dead code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14e1000: fix WARN_ON with mac-vlanJesse Brandeburg1-2/+0
When adding more than 14 mac-vlan adapters on e1000 the driver would fire a WARN_ON when adding the 15th. The WARN_ON in this case is completely un-necessary, as the code below the WARN_ON is directly handling the value the WARN_ON triggered on. CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches2-6/+0
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05e1000/e1000e: implement a simple interrupt moderationJesse Brandeburg3-6/+30
Back before e1000-7.3.20, the e1000 driver had a simple algorithm that managed interrupt moderation. The driver was updated in 7.3.20 to have the new "adaptive" interrupt moderation but we have customer requests to redeploy the old way as an option. This patch adds the old functionality back. The new functionality can be enabled via module parameter or at runtime via ethtool. Module parameter: (InterruptThrottleRate=4) to use this new moderation method. Ethtool method: ethtool -C ethX rx-usecs 4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000: Use netdev_<level>, pr_<level> and dev_<level>Emil Tantilov7-405/+367
This patch is an alternative to similar patch provided by Joe Perches. Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level> similar to e1000e. - Convert printk to pr_<level> where applicable. - Use common #define pr_fmt for the driver. - Use dev_<level> for displaying text in parts of the driver where the interface name is not assigned (like e1000_param.c). - Better align test with the new macros. CC: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000: use DMA API instead of PCI DMA functionsNick Nunley2-68/+88
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-14drivers: net: use skb_headlen()Eric Dumazet1-2/+2
replaces (skb->len - skb->data_len) occurrences by skb_headlen(skb) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller2-9/+1
Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c
2010-04-03net: convert multicast list to list_headJiri Pirko1-4/+3
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27e1000: do not modify tx_queue_len on link speed changeEmil Tantilov2-9/+1
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. This patch removes all instances of tx_queue_len in the driver. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-24net/intel: remove trailing space in messagesFrans Pop1-2/+2
Includes one minor indentation fix to placate checkpatch. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-25Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-1/+18
2010-02-23e1000: Fix DMA mapping error handling on RXAnton Blanchard1-1/+18
Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23e1000: correct wrong coding style for "else"Jiri Pirko1-2/+1
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22e1000: convert to use netdev_for_each_mc_addrJiri Pirko1-20/+17
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03e1000: call pci_save_state after pci_restore_stateNick Nunley1-0/+4
This patch adds a call to pci_save_state() immediately after the call to pci_restore_state(). Due to a change in the behavior of pci_restore_state() it is necessary to call pci_save_state() to keep the state_saved flag. This patch is based on a similar patch for ixgbe. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03e1000: Report link status in ethtool when interface is downNick Nunley3-2/+20
With this change ethtool will correctly report link status when the interface is down. Currently ethtool reports the link as not detected when the interface is down. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-19/+1
2010-01-25net: use helpers to access uc list V2Jiri Pirko1-2/+2
This patch introduces three macros to work with uc list from net drivers. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23e1000/e1000e: don't use small hardware rx buffersJesse Brandeburg1-19/+1
When testing the "e1000: enhance frame fragment detection" (and e1000e) patches we found some bugs with reducing the MTU size. The 1024 byte descriptor used with the 1000 mtu test also (re) introduced the (originally) reported bug, and causes us to need the e1000_clean_tx_irq "enhance frame fragment detection" fix. So what has occured here is that 2.6.32 is only vulnerable for mtu < 1500 due to the jumbo specific routines in both e1000 and e1000e. So, 2.6.32 needs the 2kB buffer len fix for those smaller MTUs, but is not vulnerable to the original issue reported. It has been pointed out that this vulnerability needs to be patched in older kernels that don't have the e1000 jumbo routine. Without the jumbo routines, we need the "enhance frame fragment detection" fix the e1000, old e1000e is only vulnerable for < 1500 mtu, and needs a similar fix. We split the patches up to provide easy backport paths. There is only a slight bit of extra code when this fix and the original "enhance frame fragment detection" fixes are applied, so please apply both, even though it is a bit of overkill. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller2-7/+18
2010-01-20e1000: enhance frame fragment detectionJesse Brandeburg2-2/+13
Originally From: Neil Horman <nhorman@tuxdriver.com> Modified by: Jesse Brandeburg <jesse.brandeburg@intel.com> Hey all- A security discussion was recently given: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html And a patch that I submitted awhile back was brought up. Apparently some of their testing revealed that they were able to force a buffer fragment in e1000 in which the trailing fragment was greater than 4 bytes. As a result the fragment check I introduced failed to detect the fragement and a partial invalid frame was passed up into the network stack. I've written this patch to correct it. I'm in the process of testing it now, but it makes good logical sense to me. Effectively it maintains a per-adapter state variable which detects a non-EOP frame, and discards it and subsequent non-EOP frames leading up to _and_ _including_ the next positive-EOP frame (as it is by definition the last fragment). This should prevent any and all partial frames from entering the network stack from e1000. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-20e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()Roel Kluin1-5/+5
The variable count and i are unsigned so the (<|>=)0 tests do not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan1-1/+1
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches1-2/+2
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02e1000: remove use of skb_dma_map from e1000 driverAlexander Duyck2-16/+41
Remove the use of skb_dma_map from the e1000 driver in order to avoid issues when HW iommu are in use. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net: request_irq - Remove unnecessary leading & from second argJoe Perches1-2/+2
Not as fancy as coccinelle. Checkpatch errors ignored. Compile tested allyesconfig x86, not all files compiled. grep -rPl --include=*.[ch] "\brequest_irq\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\brequest_irq\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13e1000: Fix erroneous display of stats by ethtool -SAjit Khaparde1-5/+22
Commit 23d26497 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: Use netdev_alloc_skb_ip_align()Eric Dumazet1-22/+7
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07e1000: Use the instance of net_device_stats from net_device.Ajit Khaparde3-27/+27
Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: cleanup unused prototypeDon Skidmore1-1/+0
The function e1000_enable_tx_pkt_filtering() was removed in a previous cleanup patch. this removes the no longer used prototype. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: fix namespacecheck warningsJesse Brandeburg2-15/+1
a couple of functions needed to be removed/declared static Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop unused functionality for eeprom write/readJesse Brandeburg2-120/+3
eerd and eewr don't exist on pre PCIe devices Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: updated whitespace and commentsJesse Brandeburg3-6229/+6337
A large whitespace change to e1000_hw.[ch] in order to update it to kernel coding style (by running lindent). Updated function header comments into kdoc style. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop redunant line of code, cleanupJesse Brandeburg1-8/+4
adapter was being assigned twice, also clarified variable name and unwrapped line. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: remove races when changing mtuJesse Brandeburg1-2/+14
this patch fixes a bug that occurs when routing packets and simultaneously changing the mtu. the rx_buffer_len variable is used during the rx cleanup and if that changes on the fly without stopping traffic bad things happen Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: two workarounds were incomplete, fix themJesse Brandeburg1-7/+10
1) 82544 does not need last_tx_tso workaround, it interferes with the 82544 workaround too 2) 82544 hang workaround was using the address of the page struct instead of the physical address as its "workaround decider" not sure how that ever worked Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: fix tx waking queue after queue stopped during shutdownJesse Brandeburg1-6/+9
This fix closes a race where the adapter can be shutting down while hard_start_xmit is being called and interrupts are being handled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: test link state conclusivelyJesse Brandeburg4-77/+157
e1000 was using one particular way to detect link, but with the advent of some of the newer hardware designs using SERDES connections, tests for link must completely cover all cases. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: stop timers at appropriate timesJesse Brandeburg1-7/+19
there were some hotplug cases that made timers still run after the driver had been removed, make sure to stop all the timers and not allow racy reschedules. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: use netif_tx_disableJesse Brandeburg1-2/+1
we can use netif_tx_disable now because LLTX has been removed. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: remove unused functionsJesse Brandeburg2-174/+2
after removal of pcie, need to remove some unnecessary functions Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.