aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-06-29e1000e: disable EEE support by defaultBruce Allan1-0/+4
Based on community feedback, EEE should be disabled by default until the IEEE802.3az specification has been finalized. Cc: bhutchings@solarflare.com Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29e1000e: remove EEE module parameterBruce Allan1-28/+0
As requested by Dave Miller. A follow-on set of patches will allow for ethtool to enable/disable the feature instead. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29e1000e: suppress compile warnings on certain archsBruce Allan1-17/+21
Commit 84f4ee902ad3ee964b7b3a13d5b7cf9c086e9916 causes compile warnings on architectures that have unsigned long long's that are not 64-bit, e.g. ia64. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29e1000e: don't inadvertently re-set INTX_DISABLEDean Nelson1-4/+9
Should e1000_test_msi() fail to see an msi interrupt, it attempts to fallback to legacy INTx interrupts. But an error in the code may prevent this from happening correctly. Before calling e1000_test_msi_interrupt(), e1000_test_msi() disables SERR by clearing the SERR bit from the just read PCI_COMMAND bits as it writes them back out. Upon return from calling e1000_test_msi_interrupt(), it re-enables SERR by writing out the version of PCI_COMMAND it had previously read. The problem with this is that e1000_test_msi_interrupt() calls pci_disable_msi(), which eventually ends up in pci_intx(). And because pci_intx() was called with enable set to 1, the INTX_DISABLE bit gets cleared from PCI_COMMAND, which is what we want. But when we get back to e1000_test_msi(), the INTX_DISABLE bit gets inadvertently re-set because of the attempt by e1000_test_msi() to re-enable SERR. The solution is to have e1000_test_msi() re-read the PCI_COMMAND bits as part of its attempt to re-enable SERR. During debugging/testing of this issue I found that not all the systems I ran on had the SERR bit set to begin with. And on some of the systems the same could be said for the INTX_DISABLE bit. Needless to say these latter systems didn't have a problem falling back to legacy INTx interrupts with the code as is. Signed-off-by: Dean Nelson <dnelson@redhat.com> CC: stable@kernel.org Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29e1000e: fail when try to setup unsupported featuresStanislaw Gruszka1-1/+0
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: disable gig speed when in S0->Sx transitionBruce Allan1-14/+5
Most of this workaround is necessary for all ICHx/PCH parts so one of the two MAC-type checks can be removed. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: packet split should not be used with early receiveBruce Allan1-1/+1
Originally it was thought there were issues with ICHx/PCH parts with packet split when jumbo frames were enabled but in fact it is really only when early-receive is enabled (via ERT register) on these parts. Use packet split with jumbos but only when early-receive is not enabled. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: do not touch PHY page 800 registers when link speed is 1000MbpsBruce Allan1-2/+0
The PHY on 82577/82578 has issues when the registers on page 800 are accessed when in gigabit mode. Do not clear the Wakeup Control register when resetting the part since it is on page 800 (and will be cleared on reset anyway). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: avoid polling h/w registers during link negotiationBruce Allan3-28/+29
Avoid touching hardware registers when possible, otherwise link negotiation can get messed up when user-level scripts are rapidly polling the driver to see if/when link is up. Use the saved link state information instead when possible. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: update driver version numberBruce Allan1-1/+3
Also separate out an _EXTRAVERSION similar to the core kernel. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: update copyright informationBruce Allan11-12/+12
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: enable support for EEE on 82579Bruce Allan4-1/+70
This patch enables IEEE802.3az (a.k.a. Energy Efficient Ethernet) on the new 82579 LOMs. An optional module parameter is provided to disable the feature if desired. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: initial support for 82579 LOMsBruce Allan7-46/+386
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: fix check for manageability on ICHx/PCHBruce Allan1-4/+27
Do not check for all the bits in E1000_FWSM_MODE_MASK when checking for manageability on 82577/82578; only check if iAMT is enabled. Both of the manageability checks (for 82577/82578 and ICHx) must check the firmware valid bit too since the other bits are only valid when the latter is set. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: separate out PHY statistics register updatesBruce Allan3-47/+126
The 82577/82578 parts have half-duplex statistics in PHY registers. These need only be read when in half-duplex and should all be read at once rather than one at a time to prevent excessive cycles of acquiring/releasing the PHY semaphore. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: cleanup e1000_sw_lcd_config_ich8lan()Bruce Allan1-13/+19
Do not acquire and release the PHY unnecessarily for parts that return from this workaround without actually accessing the PHY registers. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: cleanup ethtool loopback setup codeBruce Allan1-32/+42
Refactor the loopback setup code to first handle the only 10/100 PHY supported by the driver if applicable and then handle the 1Gig PHYs in a switch statement for PHY-specific setups. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03e1000e: change logical negate to bitwiseDan Carpenter1-1/+1
The bitwise negate is intended here. With the logical negate the condition is always false. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds11-452/+1017
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches4-20/+0
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: add PCI device id to enable support for 82567V-4Bruce Allan2-0/+2
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: Fix/cleanup PHY reset code for ICHx/PCHxBruce Allan1-74/+75
i) Fixes a bug where e1000_sw_lcd_config_ich8lan() was calling e1000_lan_init_done_ich8lan() to poll the STATUS.LAN_INIT_DONE bit to make sure the MAC had completed the PHY configuration. However, e1000_lan_init_done_ich8lan() had already been called in one of the two places where PHY reset occurs for ICHx/PCHx parts, which caused the second call to busy-wait for 150 msec because the LAN_INIT_DONE bit had already been checked and cleared. ii) Cleanup the two separate PHY reset code paths, i.e. the full-chip reset in e1000_reset_hw_ich8lan() and the PHY-only reset in e1000_phy_hw_reset_ich8lan(). There was duplicate code in both paths to be performed post-reset that are now combined into one new function - e1000_post_phy_reset_ich8lan(). This cleanup also included moving the clearing of the PHY Reset Asserted bit in the STATUS register (now done for all ICH/PCH parts) and the check for the indication from h/w that basic configuration has completed back to where it previously was in e1000_get_cfg_done_ich8lan(). iii) Corrected a few comments Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: move settting of flow control refresh timer to link setup codeBruce Allan3-4/+4
The flow control refresh timer value needs to be saved off so that it can be programmed into the approrpiate register when applicable but without a reset, e.g. when changing flow control parameters via ethtool. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: fix checks for manageability enabled and management pass-throughBruce Allan6-16/+52
The mac->arc_subsystem was being incorrectly used to flag whether or not manageability was enabled when it should only be used to state whether the ARC (Host interface) subsystem is available on a particular MAC _and_ only valid when any manageability is enabled. The ARC subsystem is currently only available on 80003es2lan and 82573 parts supported by the driver. A new flag, has_fwsm, is introduced to be used when checking if manageability is enabled but only on parts that acutally have an FWSM register. While the above parts have an FWSM register, there are other parts that have FWSM but do not have support for the ARC subsystem, namely 82571/2 and ICHx/PCH. And then there are parts that have manageability, but do not have either FWSM register or support for the ARC subsystem - these are 82574 and 82583. For 80003es2lan, 82571/2/3 and ICH/PCH parts, this patch makes no functional changes, it only corrects the usage of the manageability flags. For 82574 and 82583, it fixes the incorrect accesses of the non-existent FWSM register and ARC subsystem as well as corrects the check for management pass-through. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: Incorrect function pointer set for force_speed_duplex on 82577Bruce Allan2-20/+2
The force_speed_duplex function pointer was incorrectly set. Instead of calling the 82577-specific version it was calling the m88 version which, among other incorrect things, reset the PHY causing autonegotiation to be re-enabled in the PHY resulting in the link defaulting to half-duplex. The 82577-specific force_speed_duplex function also had an issue where it disabled Auto-MDI-X which caused the link to not come up. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: Cleanup e1000_sw_lcd_config_ich8lan()Bruce Allan1-77/+75
After every reset all ICH/PCH parts call this function which acquires the swflag, performs a workaround on applicable parts and releases the swflag. There is no reason for parts for which this workaround is not applicable to acquire and release the swflag so the function should just return without doing anything for these parts. This also provides for the indentation of most of the function contents to be shifted left cleaning up the code. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: Remove EN_MAC_ADDR_FILTER check from enable_mng_pass_thru checkBruce Allan1-4/+4
Patch addresses issues when manageability passthrough is enabled, but the MAC_ADDR_FILTER bit is not set in the MANC register. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: cleanup multiple common exit pointsBruce Allan1-24/+17
...in e1000_update_nvm_checksum_ich8lan(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: s/w initiated LSC MSI-X interrupts not generated; no transmitBruce Allan1-2/+9
In MSI-X mode when an IMPI SoL session was active (i.e. the PHY reset was blocked), the LSC interrupt generated by s/w to start the watchdog which started the transmitter was not getting fired by the hardware because bit 24 (the 'other' cause bit) also needed to be set. Without an active SoL session, the PHY was reset which caused the h/w to fire the LSC interrupt. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: initialize manageability (IPMI) pass-through in 82574/82583Bruce Allan3-9/+55
82574/82583 uses different registers/bits to setup manageability filters than all other parts supported by e1000e; set them accordingly for IPMI pass-through. Rename the function to better reflect what it does. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: bad state after running ethtool diagnostics with AMT enabledBruce Allan2-7/+18
When running ethtool online diagnostics with no open interface, there is a short period of time where the driver relinquishes control of the adapter during which time AMT (manageability firmware) can put the adapter into an unknown state resulting in such things as link test failure, hardware hang, reporting an incorrect link speed, etc. Resetting the adapter during an open() resolves this by putting the adapter into a quiescent state. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12e1000e: use static params to save stack space (part 2)Bruce Allan1-2/+2
A couple stack cleanups missed in an earlier patch from Jesse. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10PM QOS updateMark Gross1-10/+12
This patch changes the string based list management to a handle base implementation to help with the hot path use of pm-qos, it also renames much of the API to use "request" as opposed to "requirement" that was used in the initial implementation. I did this because request more accurately represents what it actually does. Also, I added a string based ABI for users wanting to use a string interface. So if the user writes 0xDDDDDDDD formatted hex it will be accepted by the interface. (someone asked me for it and I don't think it hurts anything.) This patch updates some documentation input I got from Randy. Signed-off-by: markgross <mgross@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-06e1000e: Reset 82577/82578 PHY before first PHY register readBruce Allan1-0/+10
Reset the PHY before first accessing it. Doing so, ensure that the PHY is in a known good state before we read/write PHY registers. This fixes a driver probe failure. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: reset MAC-PHY interconnect on 82577/82578 during Sx->S0Bruce Allan2-0/+22
During Sx->S0 transitions, the interconnect between the MAC and PHY on 82577/82578 can remain in SMBus mode instead of transitioning to the PCIe-like mode required during normal operation. Toggling the LANPHYPC Value bit essentially resets the interconnect forcing it to the correct mode. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05e1000/e1000e: implement a simple interrupt moderationJesse Brandeburg3-4/+27
Back before e1000-7.3.20, the e1000 driver had a simple algorithm that managed interrupt moderation. The driver was updated in 7.3.20 to have the new "adaptive" interrupt moderation but we have customer requests to redeploy the old way as an option. This patch adds the old functionality back. The new functionality can be enabled via module parameter or at runtime via ethtool. Module parameter: (InterruptThrottleRate=4) to use this new moderation method. Ethtool method: ethtool -C ethX rx-usecs 4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05e1000e: increase rx fifo size to 36K on 82574 and 82583Alexander Duyck1-2/+2
This change increases the RX fifo size to 36K for standard frames and decreases the TX fifo size to 4K. The reason for this change is that on slower systems the RX is much more likely to backfill and need space than the TX is. As long as the TX fifo is twice the size of the MTU we should have more than enough TX fifo. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05e1000e: Save irq into netdev structureTom Herbert1-0/+2
Set net->devirq to pdev->irq. This should be consistent with other drivers. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05e1000e: Remove unnessary log messageTom Herbert1-1/+0
Remove e_info message printed whenever TSO is enabled or disabled. This is not very useful and just clutters dmesg. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05e1000e: reduce writes of RX producer ptrTom Herbert1-34/+23
Reduce number of writes to RX producer pointer. When alloc'ing RX buffers, only write the RX producer pointer once every E1000_RX_BUFFER_WRITE (16) buffers created. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05e1000e: save skb counts in TX to avoid cache missesTom Herbert2-9/+11
In e1000_tx_map, precompute number of segements and bytecounts which are derived from fields in skb; these are stored in buffer_info. When cleaning tx in e1000_clean_tx_irq use the values in the associated buffer_info for statistics counting, this eliminates cache misses on skb fields. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-02Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-0/+3
2010-04-30e1000e: Fix oops caused by ASPM patch.Anton Blanchard1-0/+3
Commit 6f461f6c7c961f0b1b73c0f27becf472a0ac606b ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") oopses on one of my ppc64 boxes with a NULL pointer (0x4a): Unable to handle kernel paging request for data at address 0x0000004a Faulting instruction address: 0xc0000000004d2f1c cpu 0xe: Vector: 300 (Data Access) at [c000000bec1833a0] pc: c0000000004d2f1c: .e1000e_disable_aspm+0xe0/0x150 lr: c0000000004d2f0c: .e1000e_disable_aspm+0xd0/0x150 dar: 4a [c000000bec1836d0] c00000000069b9d8 .e1000_probe+0x84/0xe8c [c000000bec1837b0] c000000000386d90 .local_pci_probe+0x4c/0x68 [c000000bec183840] c0000000003872ac .pci_device_probe+0xfc/0x148 [c000000bec183900] c000000000409e8c .driver_probe_device+0xe4/0x1d0 [c000000bec1839a0] c00000000040a024 .__driver_attach+0xac/0xf4 [c000000bec183a40] c000000000409124 .bus_for_each_dev+0x9c/0x10c [c000000bec183b00] c000000000409c1c .driver_attach+0x40/0x60 [c000000bec183b90] c0000000004085dc .bus_add_driver+0x150/0x328 [c000000bec183c40] c00000000040a58c .driver_register+0x100/0x1c4 [c000000bec183cf0] c00000000038764c .__pci_register_driver+0x78/0x128 Seems like pdev->bus->self == NULL. I haven't touched pci in a long time so I'm trying to remember what this means (no pcie bridge perhaps?) The patch below fixes the oops for me. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: add registers etc. printout code just before resetting adaptersTaku Izumi1-0/+357
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: use DMA API instead of PCI DMA functionsNick Nunley2-63/+66
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller3-40/+58
Conflicts: drivers/net/e100.c drivers/net/e1000e/netdev.c
2010-04-27e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errataBruce Allan3-40/+55
Prompted by a previous patch submitted by Matthew Garret <mjg@redhat.com>, further digging into errata documentation reveals the current enabling or disabling of ASPM L0s and L1 states for certain parts supported by this driver are incorrect. 82571 and 82572 should always disable L1. For standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled, and for jumbo frames 82573/82574 must disable L1. This allows for some parts to enable L1 in certain configurations leading to better power savings. Also according to the same errata, Early Receive (ERT) should be disabled on 82573 when using jumbo frames. Cc: Matthew Garret <mjg@redhat.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-14drivers: net: use skb_headlen()Eric Dumazet1-2/+2
replaces (skb->len - skb->data_len) occurrences by skb_headlen(skb) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-14Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-0/+2
Conflicts: drivers/net/pcmcia/smc91c92_cs.c drivers/net/virtio_net.c
2010-04-13e1000e: stop cleaning when we reach tx_ring->next_to_useTerry Loftin1-0/+2
Tx ring buffers after tx_ring->next_to_use are volatile and could change, possibly causing a crash. Stop cleaning when we hit tx_ring->next_to_use. Signed-off-by: Terry Loftin <terry.loftin@hp.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.