aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ehea (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-08-04ehea: Fix napi list corruption on ifconfig downHannes Hering2-1/+4
This patch fixes the napi list handling when an ehea interface is shut down to avoid corruption of the napi list. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12netdev: restore MTU change operationBen Hutchings1-0/+1
alloc_etherdev() used to install a default implementation of this operation, but it must now be explicitly installed in struct net_device_ops. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12netdev: restore MAC address set and validate operationsBen Hutchings1-0/+1
alloc_etherdev() used to install default implementations of these operations, but they must now be explicitly installed in struct net_device_ops. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6David S. Miller1-1/+1
Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-12trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in documentation and source comments.Martin Olsson1-1/+1
Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-08Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller2-14/+19
Conflicts: include/net/tcp.h
2009-05-04net: remove driver_data direct access of struct device from more driversGreg Kroah-Hartman1-4/+4
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-04ehea: fix invalid pointer accessHannes Hering2-14/+19
This patch fixes an invalid pointer access in case the receive queue holds no pointer to the next skb when the queue is empty. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-14ehea: Fix incomplete conversion to net_device_opsAlexander Beregalov1-2/+2
Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13ehea: fix circular locking problemJan-Bernd Themann2-27/+31
This patch fixes the circular locking problem by changing the locking strategy concerning the logging of firmware handles. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20ehea: Fix memory hotplug handlingThomas Klein2-1/+3
Added missing set_bit() to disable data transfer when a memchange notification is handled Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-11ehea: Fix: Remove adapter from adapter list in error pathHannes Hering2-1/+2
Remove adapter from adapter list before freeing data structure in error path. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21ehea: Improve driver behaviour in low mem conditionsThomas Klein1-19/+12
Reworked receive queue fill policies to make the driver more tolerant in low memory conditions. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21ehea: Fix mem allocations which require page alignmentThomas Klein2-30/+30
PAGE_SIZE allocations via slab are not guaranteed to be page-aligned. Fixed all memory allocations where page alignment is required by firmware. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21ehea: Use net_device_ops structureThomas Klein2-15/+20
Adapt to lately introduced net_device_ops structure. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings1-4/+4
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13powerpc: Cleanup from l64 to ll64 change: drivers/netStephen Rothwell2-13/+13
These are powerpc specific drivers. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-06net/ehea: use consistant typeStephen Rothwell1-8/+8
ehea_plpar_hcall9() takes an "unsigned long" array to return its results, so change the arrays we pass to it to match. This is currently only 64 bit code, so the transformation is actually a noop, but because ehea_plpar_hcall9() copies the values of registers into the array, if this was ported to a 32 bit hypervisor interface "unsigned long" would probably still be the correct type. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05net/ehea: bitops work on unsigned longsStephen Rothwell2-3/+2
The flags field of struct ehea_port is only used with test_bit(), clear_bit() and set_bit() and these interfaces only work on "unsigned long"s, so change the field to be an "unsigned long". Also, this field only has two bits defined for it (0 and 1) so will still be fine if someone builds this driver for a 32 bit arch (at least as far as this flags field is concerned). Also note that ehea_driver_flags is only used in ehca_main.c, so make it static in there. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-28net: ehea NAPI interface cleanup fixStephen Rothwell1-1/+1
Commit 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces") missed two spots. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-25ehea: use get_zeroed_page for alignment-sensitive allocationNathan Lynch1-2/+2
With slub debug enabled, I see the following errors and crash with 2.6.28-rc9: IBM eHEA ethernet device driver (Release EHEA_0095) ehea: Error in ehea_h_register_rpage_mr: not on pageboundary ehea: Error in ehea_reg_mr_section: register_rpage_mr failed ehea: Error in ehea_reg_kernel_mr: registering mr failed ehea: Error in ehea_setup_ports: creating MR failed ehea 23c00100.lhea: setup_ports failed Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6bbdcb Faulting instruction address: 0xd000000000064a24 cpu 0x0: Vector: 300 (Data Access) at [c0000000740e7190] pc: d000000000064a24: .ehea_update_firmware_handles+0x84/0x47c [ehea] lr: d00000000006df34: .ehea_probe_adapter+0x35c/0x39c [ehea] sp: c0000000740e7410 msr: 8000000000009032 dar: 6b6b6b6b6b6bbdcb dsisr: 40000000 current = 0xc000000074233780 paca = 0xc0000000008a3300 pid = 2046, comm = modprobe enter ? for help [c0000000740e74f0] d00000000006df34 .ehea_probe_adapter+0x35c/0x39c [ehea] [c0000000740e75a0] c00000000041d5a4 .of_platform_device_probe+0x78/0xb0 [c0000000740e7630] c0000000002d8b38 .driver_probe_device+0x13c/0x200 [c0000000740e76c0] c0000000002d8c90 .__driver_attach+0x94/0xd8 [c0000000740e7750] c0000000002d7d64 .bus_for_each_dev+0x80/0xd8 [c0000000740e7800] c0000000002d889c .driver_attach+0x28/0x40 [c0000000740e7880] c0000000002d8340 .bus_add_driver+0xd4/0x284 [c0000000740e7920] c0000000002d90a0 .driver_register+0xc4/0x198 [c0000000740e79d0] c00000000041d45c .of_register_driver+0x4c/0x60 [c0000000740e7a50] c000000000020ef8 .ibmebus_register_driver+0x30/0x4c [c0000000740e7ae0] d00000000006e108 .ehea_module_init+0x194/0x208c [ehea] [c0000000740e7b90] c000000000009028 .do_one_initcall+0x90/0x1ac [c0000000740e7d90] c00000000008619c .sys_init_module+0xc4/0x200 [c0000000740e7e30] c0000000000084ac syscall_exit+0x0/0x40 (When slub debug is disabled it works fine.) PAGE_SIZE allocations via slab are not guaranteed to be page-aligned; use get_zeroed_page for the 'pt' buffer (I don't really know what this is, only that it is passed to firmware and that the first error message complains about its alignment). This allows the system to boot. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-25drivers/net/ehea: Remove redundant testJulia Lawall1-2/+2
In each case, vpage is checked not to be NULL just after it is initialized at the beginning of each loop iteration. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman1-3/+3
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-06ehea: Fix some whitespace issuesHannes Hering2-6/+6
This patch removes some trailing whitespaces and spaces before tabs. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller1-1/+0
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27ehea: Detect 16GB hugepages for firmware restrictionThomas Klein3-6/+56
All kernel memory which is used for kernel/hardware data transfer must be registered with firmware using "memory regions". 16GB hugepages may not be part of a memory region due to firmware restrictions. This patch modifies the walk_memory_resource callback fn to filter hugepages and add only standard memory to the busmap which is later on used for MR registration. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22ehea: Fix memory hotplug supportHannes Hering4-41/+119
This patch implements the memory notifier to update the busmap instantly instead of rebuilding the whole map. This is necessary because walk_memory_resource provides different information than required during memory hotplug. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-25Revert "ehea: fix mutex and spinlock use"David S. Miller1-4/+22
This reverts commit 2eefbd63d0c85daa1317636474c226e236beba81. On request by driver author and Jeff Garzik. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-24ehea: Enable DLPAR memory removeHannes Hering1-2/+2
This patch adds the capability flag to the capability list for dynamic LPAR memory remove to enable this feature. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: fix mutex and spinlock useSebastien Dugue1-22/+4
Looks like to me that the ehea_fw_handles.lock mutex and the ehea_bcmc_regs.lock spinlock are taken much longer than necessary and could as well be pushed inside the functions that need them (ehea_update_firmware_handles() and ehea_update_bcmc_registrations()) rather than at each callsite. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: Fix DLPAR memory handlingHannes Hering1-1/+2
The ehea busmap must be allocated only once in the first of many calls of the ehea_create_busmap_callback. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: fix phyp debugging typoSebastien Dugue1-1/+1
Fix typo in ehea_h_query_ehea() which prevents building when DEBUG is on. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30drivers/net/ehea/ehea_main.c: Release mutex in error handling codeJulia Lawall1-2/+2
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: Access iph->tot_len with correct endiannessRoland Dreier1-1/+1
iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on ehea, since ehea only exists for big-endian platfroms (at the moment at least) but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: fix race conditionJan-Bernd Themann2-7/+16
When ehea_stop is called the function cancel_work_sync(&port->reset_task) is used to ensure that the reset task is not running anymore. We need an additional flag to ensure that it can not be scheduled after this call again for a certain time. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: add MODULE_DEVICE_TABLEJan-Bernd Themann1-0/+1
Required to allow distros to easily detect when ehea module needs to be loaded Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ehea: fix might sleep problemJan-Bernd Themann2-12/+12
A mutex has to be replaced by spinlocks as it can be called from a context which does not allow sleeping. The kzalloc flag GFP_KERNEL has to be replaced by GFP_ATOMIC for the same reason. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-12net: Eliminate flush_scheduled_work() calls while RTNL is held.David S. Miller1-1/+2
If the RTNL is held when we invoke flush_scheduled_work() we could deadlock. One such case is linkwatch, it is a work struct which tries to grab the RTNL semaphore. The most common case are net driver ->stop() methods. The simplest conversion is to instead use cancel_{delayed_}work_sync() explicitly on the various work struct the driver uses. This is an OK transformation because these work structs are doing things like resetting the chip, restarting link negotiation, and so forth. And if we're bringing down the device, we're about to turn the chip off and reset it anways. So if we cancel a pending work event, that's fine here. Some drivers were working around this deadlock by using a msleep() polling loop of some sort, and those cases are converted to instead use cancel_{delayed_}work_sync() as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10ehea: set mac address fixJan-Bernd Themann1-6/+10
eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22drivers/net/ehea - remove unnecessary memset after kzallocJoe Perches1-2/+0
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22ehea: Fix use after free on rebootBrian King1-1/+2
Fixes the following use after free oops: ehea: Reboot: freeing all eHEA resources Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6c5b Faulting instruction address: 0xd000000000354488 cpu 0x0: Vector: 300 (Data Access) at [c00000002ec6f310] pc: d000000000354488: .ehea_shutdown_single_port+0x50/0x78 [ehea] lr: d00000000035447c: .ehea_shutdown_single_port+0x44/0x78 [ehea] sp: c00000002ec6f590 msr: 8000000000009032 dar: 6b6b6b6b6b6b6c5b dsisr: 40000000 current = 0xc0000000281412e0 paca = 0xc0000000006df300 pid = 10930, comm = reboot enter ? for help [c00000002ec6f590] d00000000035d64c .ehea_remove+0x44/0x124 [ehea] (unreliable) [c00000002ec6f630] c000000000319f88 .of_platform_device_remove+0x40/0x58 [c00000002ec6f6a0] c000000000291018 .__device_release_driver+0xb0/0xf0 [c00000002ec6f730] c000000000291120 .driver_detach+0xc8/0xfc [c00000002ec6f7c0] c00000000028fe24 .bus_remove_driver+0xb4/0x114 [c00000002ec6f850] c000000000291768 .driver_unregister+0x54/0x74 [c00000002ec6f8e0] c00000000031a0c8 .of_unregister_driver+0x14/0x28 [c00000002ec6f950] c000000000023ba0 .ibmebus_unregister_driver+0x10/0x24 [c00000002ec6f9c0] d000000000354180 .ehea_reboot_notifier+0x30/0x4c [ehea] [c00000002ec6fa40] c0000000003c95a8 .notifier_call_chain+0x5c/0xcc [c00000002ec6fae0] c000000000082cd4 .__blocking_notifier_call_chain+0x70/0xb0 [c00000002ec6fb90] c000000000075cf8 .kernel_restart_prepare+0x24/0x58 [c00000002ec6fc10] c000000000075f0c .kernel_restart+0x20/0x6c [c00000002ec6fc90] c000000000078674 .sys_reboot+0x1d4/0x290 [c00000002ec6fe30] c0000000000086ac syscall_exit+0x0/0x40 Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13ehea: Add DLPAR memory remove supportHannes Hering3-84/+254
The eHEA driver uses the recently modified walk_memory_resource for powerpc functionality to detect the memory layout. It further uses the memory hotplug notifiers to catch memory hotplug events. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25ehea: make things staticAndrew Morton1-2/+2
ehea_flush_sq() and ehea_purge_sq() should be static. Cc: Jeff Garzik <jeff@garzik.org> Cc: Thomas Klein <osstklei@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-14Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller2-3/+24
Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-12ehea: Fix DLPAR memory add supportThomas Klein2-3/+24
This patch fixes two weaknesses in send/receive packet handling which may lead to kernel panics during DLPAR memory add operations. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-28netdev: ehea: port_lock semaphore to mutexDaniel Walker2-22/+24
Convert the port_lock to a mutex. There is also some additional cleanup. The line length inside the ehea_rereg_mrs was getting long so I made some adjustments to shorten them. [akpm@linux-foundation.org: dec99ification] Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28netdev: ehea: bcmc_regs semaphore to mutexDaniel Walker2-10/+10
Convert the ehea_bcmc_regs.lock to a mutex. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28netdev: ehea: locking order correctionDaniel Walker1-2/+2
Nested locks always need to be taken in the same order. This change factors out the ehea_fw_handles.lock to make the locking order consistent. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28netdev: ehea: ehea_fw_handles semaphore to mutexDaniel Walker2-10/+10
Converted the ehea_fw_handles.lock to a mutex. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.