aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-03-12lpc32xx: Added ethernet driverstigge@antcom.de1-0/+1
This patch adds an ethernet driver for the LPC32xx ARM SoC. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2011-11-29net: add calxeda xgmac ethernet driverRob Herring1-0/+1
Add support for the XGMAC 10Gb ethernet device in the Calxeda Highbank SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22macb: initial support for Cadence GEMJamie Iles1-1/+1
The Cadence GEM is based on the MACB Ethernet controller but has a few small changes with regards to register and bitfield placement. This patch detects the presence of a GEM by reading the module ID register and setting a flag appropriately. This handles the new HW address, USRIO and hash register base register locations in GEM. v3: - convert to macb_is_gem() inline rather than storing a boolean flag - handle rx_overrun stats for gem Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-01net/ethernet: sc92031 is not RealtekCesar Eduardo Barros1-0/+1
While the SC92031 could be found on fake "Realtek" NICs, it has no relationship to Realtek, and is actually from Silan. Create a new subdirectory for silan and move sc92031 there. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13acenic: Move the Alteon driverJeff Kirsher1-0/+1
Based on feedback from Alan Cox, the acenic driver moved to drivers/net/ethernet/alteon/ and made the necessary Kconfig and Makefile changes. CC: Jes Sorensen <jes@trained-monkey.org> CC: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12tile: Move the Tilera driverJeff Kirsher1-0/+1
Move the Tilera driver into drivers/net/ethernet/tile and make the necessary Kconfig and Makefile changes. Updated the Kconfig so that the options defualt to y if TILE kernel. CC: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12xircom: Move the Xircom driverJeff Kirsher1-0/+1
Move the Xircom driver into drivers/net/ethernet/xircom/ and make the necessary Kconfig and Makefile changes. CC: <psheer@icon.co.za> CC: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12sh_eth: Move the Renesas SuperH driverJeff Kirsher1-0/+1
Move the Renesas driver into drivers/net/ethernet/renesas/ and make the necessary Kconfig and Makefile changes. CC: Yoshihiro Shimoda <yoshihiro.shirmoda.uh@renesas.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12netx: Move the netx driverJeff Kirsher1-0/+1
Move the netx driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-12dm9000: Move the Davicom driverJeff Kirsher1-0/+1
Move the Davicom driver into drivers/net/ethernet/davicom/ and make the necessary Kconfig and Makefile changes. CC: Ben Dooks <ben@simtec.co.uk> CC: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-12enc28j60: Move the Microchip driverJeff Kirsher1-0/+1
Move the Microchip driver into drivers/net/ethernet/microchip/ and make the necessary Kconfig and Makefile changes. CC: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12greth: Move the Aeroflex Gaisler driverJeff Kirsher1-0/+1
Move the Aeroflex Gaisler driver into drivers/net/ethernet/aeroflex/ and make the necessary Kconfig and Makefile changes. CC: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12ethoc: Move the Avionic driverJeff Kirsher1-0/+1
Move the Avionic driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12dnet: Move the Dave Ethernet driverJeff Kirsher1-0/+1
Move the Dave Ethernet driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12hp100: Move the HP driverJeff Kirsher1-0/+1
Move the HP driver into drivers/net/ethernet/hp/ and made the necessary Kconfig and Makefile changes. CC: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12starfire: Move the Adaptec driverJeff Kirsher1-0/+1
Move the Adaptec driver into drivers/net/ethernet/adaptec/ and make the necessary Kconfig and Makefile changes. CC: Ion Badulescu <ionut@badula.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12forcedeth: Move the NVIDIA nForce driverJeff Kirsher1-0/+1
Move the nForce driver into drivers/net/ethernet/nvidia/ and make the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12fealnx: Move the Myson driverJeff Kirsher1-0/+1
Move the Myson driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Donald Becker <becker@scyld.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12r6040: Move the RDC driverJeff Kirsher1-0/+1
Move the RDC driver into drivers/net/ethernet/rdc/ and make the necessary Kconfig and Makefile changes. CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12macb: Move the Atmel driverJeff Kirsher1-0/+1
Move the Atmel driver into drivers/net/ethernet/cadence/ and make the necessary Kconfig and Makefile changes. CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-08-12bfin_mac: Move the Analog Devices Inc driverJeff Kirsher1-0/+1
Move the Analog Devices Inc driver into drivers/net/ethernet/adi/ and make the necessary Kconfig and Makefile changes. CC: <uclinux-dist-devel@blackfin.uclinux.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Bob Liu <bob.liu@analog.com>
2011-08-12lantiq: Move the Lantiq SoC driverJeff Kirsher1-0/+1
Move the Lantiq driver into drivers/net/ethernet/ and the necessary Kconfig and Makefile changes. CC: John Crispin <blogic@openwrt.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: John Crispin <blogic@openwrt.org>
2011-08-12mipsnet: Move the MIPS driverJeff Kirsher1-0/+1
Move the MIPS drivers into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12korina: Move the IDT driverJeff Kirsher1-0/+1
Move the IDT driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes CC: "IDT Inc." <rischelp@idt.com> CC: Felix Fietkau <nbd@openwrt.org> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12ipg: Move the IC Plus driverJeff Kirsher1-0/+1
Move the IC Plus driver into drivers/net/ethernet/icplus/ and make the necessary Kconfig and Makefile changes. CC: <craig_rich@sundanceti.com> CC: <sorbica@icplus.com.tw> CC: <jesse@icplus.com.tw> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12xilinx/ll_temac: Move the Xilinx driversJeff Kirsher1-0/+1
Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and make the necessary Kconfig and Makefile changes. CC: John Williams <john.williams@petalogix.com> CC: "David H. Lynch Jr." <dhlii@dlasys.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12jme: Move the JME driverJeff Kirsher1-0/+1
Move the JME driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12octeon: Move the Cavium driverJeff Kirsher1-0/+1
Move the Cavium driver to drivers/net/ethernet/octeon/ and make the necessary Kconfig and Makefile changes. CC: David Daney <david.daney@cavium.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: David Daney <david.daney@cavium.com>
2011-08-12hamachi/yellowfin: Move the packet engine driversJeff Kirsher1-0/+1
Move the packet engine drivers to drivers/net/ethernet/packetengines/ and the necessary Kconfig and Makefile changes. CC: Donald Becker <becker@scyld.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12davinci*/tlan/cpmac: Move the Texas Instruments (TI) driversJeff Kirsher1-0/+1
Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and make the necessary Kconfig and Makefile changes. CC: Sriram <srk@ti.com> CC: Vinay Hegde <vinay.hegde@ti.com> CC: Cyril Chemparathy <cyril@ti.com> CC: Samuel Chessman <chessman@tux.org> CC: <torben.mathiasen@compaq.com> CC: Eugene Konev <ejka@imfi.kspu.ru> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12s6gmac: Move the s6gmac driversJeff Kirsher1-0/+1
Move the s6gmac driver to drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Oskar Schirmer <os@emlix.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12tsi108*: Move the Tundra driverJeff Kirsher1-0/+1
Move the Tundra driver to drivers/net/ethernet/tundra/ and make the necessary Kocnfig and Makefile changes. CC: Kong Lai <kong.lai@tundra.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12nuvoton: Move the Nuvoton driverJeff Kirsher1-0/+1
Move the Nuvoton driver into drivers/net/ethernet/nuvoton/ and make the necessary Kconfig and Makefile changes. CC: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12cirrus: Move the Cirrus network driverJeff Kirsher1-0/+1
Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/ and make the necessary Kconfig and Makefile changes CC: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12sis*: Move the Silicon Integrated Systems (SiS) driversJeff Kirsher1-0/+1
Move the SiS drivers into drivers/net/ethernet/sis/ and make the necessary Kconfig and Makefile changes CC: Daniele Venzano <venza@brownhat.org> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12toshiba: Move the Toshiba driversJeff Kirsher1-0/+1
Move the Toshiba ethernet drivers into drivers/net/ethernet/toshiba and make the necessary Kconfig and Makefile changes. CC: Geoff Levand <geoff@infradead.org> CC: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12ks8*/ksz8*: Move the Micrel driversJeff Kirsher1-0/+1
Move the Micrel drivers into drivers/net/ethernet/micrel/ and make the necessary Kconfig and Makefile changes. CC: Ben Dooks <ben@simtec.co.uk> CC: Tristram Ha <Tristram.Ha@micrel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12freescale: Move the Freescale driversJeff Kirsher1-0/+1
Move the Freescale drivers into drivers/net/ethernet/freescale/ and make the necessary Kconfig and Makefile changes. CC: Sandeep Gopalpet <sandeep.kumar@freescale.com> CC: Andy Fleming <afleming@freescale.com> CC: Shlomi Gridish <gridish@freescale.com> CC: Li Yang <leoli@freescale.com> CC: Pantelis Antoniou <pantelis.antoniou@gmail.com> CC: Vitaly Bordug <vbordug@ru.mvista.com> CC: Dan Malek <dmalek@jlc.net> CC: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12eth16i: Move the Allied Telesis/Fujitsu driversJeff Kirsher1-0/+1
Move the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/ and make the necessary Kconfig and Makefile changes. CC: Shingo Fujimoto <shingo@flab.fujitsu.co.jp> CC: Yutaka Tamiya <tamy@flab.fujitsu.co.jp> CC: Rene Schmit <rene@bss.lu> CC: Mika Kuoppala <miku@iki.fi> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12via-*: Move the VIA driversJeff Kirsher1-0/+1
Move the VIA drivers into drivers/net/ethernet/via/ and make the necessary Kconfig and Makefile changes. CC: Roger Luethi <rl@hellgate.ch> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet driversJeff Kirsher1-0/+1
Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/ and make the necessary Kconfig and Makefile changes. CC: Sachin Sanap <ssanap@marvell.com> CC: Zhangfei Gao <zgao6@marvell.com> CC: Philip Rakity <prakity@marvell.com> CC: Mark Brown <markb@marvell.com> CC: Lennert Buytenhek <buytenh@marvell.com> CC: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12pch_gbe: Move the OKI Semiconductor driverJeff Kirsher1-0/+1
Move the OKI Semiconductor driver into driver/net/ethernet/oki-semi/ and make the necessary Kconfig and Makefile changes. Note: there is no documented maintainer for this driver, so I CC'd the last 2 major contributors. CC: Tomoya <tomoya-linux@dsn.okisemi.com> CC: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12seeq: Move the SEEQ driversJeff Kirsher1-0/+1
Move the drivers that use SEEQ chipset into drivers/net/ethernet/seeq and make the necessary Kconfig and Makefile changes. CC: Russell King <linux@arm.linux.org.uk> CC: Hamish Coleman <hamish@zot.apana.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12ioc3-eth/meth: Move the SGI driversJeff Kirsher1-0/+1
Move the SGI drivers into drivers/net/ethernet/sgi/ and make the necessary Kconfig and Makefile changes. CC: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12ewrk3/tulip: Move the DEC - Tulip driversJeff Kirsher1-0/+1
Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/ and make the necessary Kconfig and Makefile changes. The Digital Equioment (DEC) driver ewrk3 was moved into drivers/net/ethernet/dec/ and the remaining drivers (Tulip) were moved into drivers/net/ethernet/dec/tulip/ CC: Tobias Ringstrom <tori@unhappy.mine.nu> CC: Grant Grundler <grundler@parisc-linux.org> CC: David Davies <davies@maniac.ultranet.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2011-08-11atl*: Move the Atheros driversJeff Kirsher1-0/+1
Move the Atheros drivers into drivers/net/ethernet/atheros/ and make the necessary Kconfig and Makefile changes. CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: Jie Yang <jie.yang@atheros.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11de6*/dl2k/sundance: Move the D-Link driversJeff Kirsher1-0/+1
Move the D-Link drivers into drivers/net/ethernet/dlink/ and make the necessary Kconfig and Makefile changes. CC: Bjorn Ekwall <bj0rn@blox.se> CC: Donald Becker <becker@scyld.com> CC: Edward Peng <edward_peng@dlink.com.tw> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-118139*/atp/r8169/sc92031: Move the Realtek driversJeff Kirsher1-0/+1
Move the Realtek drivers into drivers/net/ethernet/realtek/ and make the necessary Kconfig and Makefile changes. CC: Realtek linux nic maintainers <nic_swsd@realtek.com> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Jeff Garzik <jgarzik@pobox.com> CC: Donald Becker <becker@scyld.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11ftgmac100/ftmac100: Move the Faraday driversJeff Kirsher1-0/+1
Move the Faraday driver into drivers/net/ethernet/faraday/ and make the necessary Kconfig and Makefile changes. CC: "Po-Yu Chuang" <ratbert@faraday-tech.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.