aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/amazon (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-04-11net/ena: switch to pci_alloc_irq_vectorsChristoph Hellwig2-45/+12
Remove the deprecated pci_enable_msix API in favour of its successor. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ena: remove superfluous check in ena_remove()Lino Sanfilippo1-6/+0
The check in ena_remove() for the pci driver data not being NULL is not needed, since it is always set in the probe() function. Remove the superfluous check. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: update driver version to 1.1.2Netanel Belgazal1-1/+1
Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: change condition for host attribute configurationNetanel Belgazal2-7/+6
Move the host info config to be the first admin command that is executed. This change require the driver to remove the 'feature check' from host info configuration flow. The check is removed since the supported features bitmask field is retrieved only after calling ENA_ADMIN_DEVICE_ATTRIBUTES admin command. If set host info is not supported an error will be returned by the device. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: change driver's default timeoutsNetanel Belgazal2-5/+5
The timeouts were too agressive and sometimes cause false alarms. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: reduce the severity of ena printoutsNetanel Belgazal2-13/+28
Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: use READ_ONCE to access completion descriptorsNetanel Belgazal2-4/+5
Completion descriptors are accessed from the driver and from the device. To avoid reading the old value, use READ_ONCE macro. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: use napi_complete_done() return valueNetanel Belgazal1-15/+29
Do not unamsk interrupts if we are in busy poll mode. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: fix potential access to freed memory during device resetNetanel Belgazal1-13/+43
If the ena driver detects that the device is not behave as expected, it tries to reset the device. The reset flow calls ena_down, which will frees all the resources the driver allocates and then it will reset the device. This flow can cause memory corruption if the device is still writes to the driver's memory space. To overcome this potential race, move the reset before the device resources are freed. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: refactor ena_get_stats64 to be atomic context safeNetanel Belgazal3-15/+42
ndo_get_stat64() can be called from atomic context, but the current implementation sends an admin command to retrieve the statistics from the device. This admin command can sleep. This patch re-factors the implementation of ena_get_stats64() to use the {rx,tx}bytes/count from the driver's inner counters, and to obtain the rx drop counter from the asynchronous keep alive (heart bit) event. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: fix NULL dereference when removing the driver after device reset failedNetanel Belgazal1-1/+5
If for some reason the device stops responding, and the device reset failes to recover the device, the mmio register read data structure will not be reinitialized. On driver removal, the driver will also try to reset the device, but this time the mmio data structure will be NULL. To solve this issue, perform the device reset in the remove function only if the device is runnig. Crash log 54.240382] BUG: unable to handle kernel NULL pointer dereference at (null) [ 54.244186] IP: [<ffffffffc067de5a>] ena_com_reg_bar_read32+0x8a/0x180 [ena_drv] [ 54.244186] PGD 0 [ 54.244186] Oops: 0002 [#1] SMP [ 54.244186] Modules linked in: ena_drv(OE-) snd_hda_codec_generic kvm_intel kvm crct10dif_pclmul ppdev crc32_pclmul ghash_clmulni_intel aesni_intel snd_hda_intel aes_x86_64 snd_hda_controller lrw gf128mul cirrus glue_helper ablk_helper ttm snd_hda_codec drm_kms_helper cryptd snd_hwdep drm snd_pcm pvpanic snd_timer syscopyarea sysfillrect snd parport_pc sysimgblt serio_raw soundcore i2c_piix4 mac_hid lp parport psmouse floppy [ 54.244186] CPU: 5 PID: 1841 Comm: rmmod Tainted: G OE 3.16.0-031600-generic #201408031935 [ 54.244186] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 54.244186] task: ffff880135852880 ti: ffff8800bb640000 task.ti: ffff8800bb640000 [ 54.244186] RIP: 0010:[<ffffffffc067de5a>] [<ffffffffc067de5a>] ena_com_reg_bar_read32+0x8a/0x180 [ena_drv] [ 54.244186] RSP: 0018:ffff8800bb643d50 EFLAGS: 00010083 [ 54.244186] RAX: 000000000000deb0 RBX: 0000000000030d40 RCX: 0000000000000003 [ 54.244186] RDX: 0000000000000202 RSI: 0000000000000058 RDI: ffffc90000775104 [ 54.244186] RBP: ffff8800bb643d88 R08: 0000000000000000 R09: cf00000000000000 [ 54.244186] R10: 0000000fffffffe0 R11: 0000000000000001 R12: 0000000000000000 [ 54.244186] R13: ffffc90000765000 R14: ffffc90000775104 R15: 00007fca1fa98090 [ 54.244186] FS: 00007fca1f1bd740(0000) GS:ffff88013fd40000(0000) knlGS:0000000000000000 [ 54.244186] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.244186] CR2: 0000000000000000 CR3: 00000000b9cf6000 CR4: 00000000001406e0 [ 54.244186] Stack: [ 54.244186] 0000000000000202 0000005800000286 ffffc90000765000 ffffc90000765000 [ 54.244186] ffff880135f6b000 ffff8800b9360000 00007fca1fa98090 ffff8800bb643db8 [ 54.244186] ffffffffc0680b3d ffff8800b93608c0 ffffc90000765000 ffff880135f6b000 [ 54.244186] Call Trace: [ 54.244186] [<ffffffffc0680b3d>] ena_com_dev_reset+0x1d/0x1b0 [ena_drv] [ 54.244186] [<ffffffffc0678497>] ena_remove+0xa7/0x130 [ena_drv] [ 54.244186] [<ffffffff813d4df6>] pci_device_remove+0x46/0xc0 [ 54.244186] [<ffffffff814c3b7f>] __device_release_driver+0x7f/0xf0 [ 54.244186] [<ffffffff814c4738>] driver_detach+0xc8/0xd0 [ 54.244186] [<ffffffff814c3969>] bus_remove_driver+0x59/0xd0 [ 54.244186] [<ffffffff814c4fde>] driver_unregister+0x2e/0x60 [ 54.244186] [<ffffffff810f0a80>] ? show_refcnt+0x40/0x40 [ 54.244186] [<ffffffff813d4ec3>] pci_unregister_driver+0x23/0xa0 [ 54.244186] [<ffffffffc068413f>] ena_cleanup+0x10/0xed1 [ena_drv] [ 54.244186] [<ffffffff810f3a47>] SyS_delete_module+0x157/0x1e0 [ 54.244186] [<ffffffff81014fb7>] ? do_notify_resume+0xc7/0xd0 [ 54.244186] [<ffffffff81793fad>] system_call_fastpath+0x1a/0x1f [ 54.244186] Code: c3 4d 8d b5 04 01 01 00 4c 89 f7 e8 e1 5a 11 c1 48 89 45 c8 41 0f b7 85 00 01 01 00 8d 48 01 66 2d 52 21 66 41 89 8d 00 01 01 00 <66> 41 89 04 24 0f b7 45 d4 89 45 d0 89 c1 41 0f b7 85 00 01 01 [ 54.244186] RIP [<ffffffffc067de5a>] ena_com_reg_bar_read32+0x8a/0x180 [ena_drv] [ 54.244186] RSP <ffff8800bb643d50> [ 54.244186] CR2: 0000000000000000 [ 54.244186] ---[ end trace 18dd9889b6497810 ]--- Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: fix RSS default hash configurationNetanel Belgazal1-1/+1
ENA default hash configures IPv4_frag hash twice instead of configure non-IP packets. The bug caused IPv4 fragmented packets to be calculated based on L2 source and destination address instead of L3 source and destination. IPv4 packets can reach to the wrong Rx queue. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: fix ethtool RSS flow configurationNetanel Belgazal1-6/+6
ena_flow_data_to_flow_hash and ena_flow_hash_to_flow_type treat the ena_flow_hash_to_flow_type enum as power of two values. Change the values of ena_admin_flow_hash_fields to be power of two values. This bug effect the ethtool set/get rxnfc. ethtool will report wrong values hash fields for get and will configure wrong hash fields in set. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: fix queues number calculationNetanel Belgazal1-1/+1
The ENA driver tries to open a queue per vCPU. To determine how many vCPUs the instance have it uses num_possible_cpus() while it should have use num_online_cpus() instead. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net/ena: remove ntuple filter support from device feature listNetanel Belgazal1-1/+0
Remove NETIF_F_NTUPLE from netdev->features. The ENA device driver does not support ntuple filtering. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger1-6/+4
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: ena: use setup_timer() and mod_timer()Wei Yongjun1-6/+3
Use setup_timer() instead of init_timer(), being the preferred/standard way to set a timer up. Also, quoting the mod_timer() function comment: -> mod_timer() is a more efficient way to update the expire field of an active timer (if the timer is inactive it will be activated). Use setup_timer and mod_timer to setup and arm a timer, to make the code cleaner and easier to read. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson1-7/+2
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: ena: change the return type of ena_set_push_mode() to be void.Rami Rosen1-9/+3
This patch changes the return type of ena_set_push_mode() to be void, as it always returns 0. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: ena: Fix error return code in ena_device_init()Wei Yongjun1-0/+1
Fix to return a negative error code from the invalid dma width error handling case instead of 0. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: ena: Remove unnecessary pci_set_drvdata()Wei Yongjun1-3/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)Netanel Belgazal15-0/+10540
This is a driver for the ENA family of networking devices. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.