aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/apm (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-12tc-testing: add ETS scheduler to tdc build configurationDavide Caratti1-0/+1
add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file to perform a full tdc run will encounter the following warning: ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully Fixes: 82c664b69c8b ("selftests: qdiscs: Add test coverage for ETS Qdisc") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: phy: fix MDIO bus PM PHY resumingHeiner Kallweit2-1/+7
So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: hns3: clear port base VLAN when unload PFJian Shen1-0/+23
Currently, PF missed to clear the port base VLAN for VF when unload. In this case, the VLAN id will remain in the VLAN table. This patch fixes it. Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: hns3: fix RMW issue for VLAN filter switchJian Shen1-4/+15
According to the user manual, the ingress and egress VLAN filter are configured at the same time. Currently, hclge_init_vlan_config() and hclge_set_vlan_spoofchk() will both change the VLAN filter switch. So it's necessary to read the old configuration before modifying it. Fixes: 22044f95faa0 ("net: hns3: add support for spoof check setting") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: hns3: fix VF VLAN table entries inconsistent issueJian Shen4-0/+6
Currently, if VF is loaded on the host side, the host doesn't clear the VF's VLAN table entries when VF removing. In this case, when doing reset and disabling sriov at the same time the VLAN device over VF will be removed, but the VLAN table entries in hardware are remained. This patch fixes it by asking PF to clear the VLAN table entries for VF when VF is removing. It also clears the VLAN table full bit after VF VLAN table entries being cleared. Fixes: c6075b193462 ("net: hns3: Record VF vlan tables") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: hns3: fix "tc qdisc del" failed issueYonglong Liu1-1/+1
The HNS3 driver supports to configure TC numbers and TC to priority map via "tc" tool. But when delete the rule, will fail, because the HNS3 driver needs at least one TC, but the "tc" tool sets TC number to zero when delete. This patch makes sure that the TC number is at least one. Fixes: 30d240dfa2e8 ("net: hns3: Add mqprio hardware offload support in hns3 driver") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12taprio: Fix sending packets without dequeueing themVinicius Costa Gomes1-3/+9
There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: mvmdio: avoid error message for optional IRQChris Packham1-3/+3
Per the dt-binding the interrupt is optional so use platform_get_irq_optional() instead of platform_get_irq(). Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") platform_get_irq() produces an error message orion-mdio f1072004.mdio: IRQ index 0 not found which is perfectly normal if one hasn't specified the optional property in the device tree. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: dsa: mv88e6xxx: Add missing mask of ATU occupancy registerAndrew Lunn1-0/+2
Only the bottom 12 bits contain the ATU bin occupancy statistics. The upper bits need masking off. Fixes: e0c69ca7dfbb ("net: dsa: mv88e6xxx: Add ATU occupancy via devlink resources") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: memcg: fix lockdep splat in inet_csk_accept()Eric Dumazet1-7/+7
Locking newsk while still holding the listener lock triggered a lockdep splat [1] We can simply move the memcg code after we release the listener lock, as this can also help if multiple threads are sharing a common listener. Also fix a typo while reading socket sk_rmem_alloc. [1] WARNING: possible recursive locking detected 5.6.0-rc3-syzkaller #0 Not tainted -------------------------------------------- syz-executor598/9524 is trying to acquire lock: ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline] ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492 but task is already holding lock: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline] ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sk_lock-AF_INET6); lock(sk_lock-AF_INET6); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by syz-executor598/9524: #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline] #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445 stack backtrace: CPU: 0 PID: 9524 Comm: syz-executor598 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2370 [inline] check_deadlock kernel/locking/lockdep.c:2411 [inline] validate_chain kernel/locking/lockdep.c:2954 [inline] __lock_acquire.cold+0x114/0x288 kernel/locking/lockdep.c:3954 lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4484 lock_sock_nested+0xc5/0x110 net/core/sock.c:2947 lock_sock include/net/sock.h:1541 [inline] inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492 inet_accept+0xe9/0x7c0 net/ipv4/af_inet.c:734 __sys_accept4_file+0x3ac/0x5b0 net/socket.c:1758 __sys_accept4+0x53/0x90 net/socket.c:1809 __do_sys_accept4 net/socket.c:1821 [inline] __se_sys_accept4 net/socket.c:1818 [inline] __x64_sys_accept4+0x93/0xf0 net/socket.c:1818 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4445c9 Code: e8 0c 0d 03 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc35b37608 EFLAGS: 00000246 ORIG_RAX: 0000000000000120 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004445c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000306777 R09: 0000000000306777 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004053d0 R14: 0000000000000000 R15: 0000000000000000 Fixes: d752a4986532 ("net: memcg: late association of sock to memcg") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shakeel Butt <shakeelb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11s390/qeth: implement smarter resizing of the RX buffer poolJulian Wiedmann4-19/+56
The RX buffer pool is allocated in qeth_alloc_qdio_queues(). A subsequent pool resizing is then handled in a very simple way: first free the current pool, then allocate a new pool of the requested size. There's two ways where this can go wrong: 1. if the resize action happens _before_ the initial pool was allocated, then a subsequent initialization will call qeth_alloc_qdio_queues() and fill the pool with a second(!) set of pages. We consume twice the planned amount of memory. This is easy to fix - just skip the resizing if the queues haven't been allocated yet. 2. if the initial pool was created by qeth_alloc_qdio_queues() but a subsequent resizing fails, then the device has no(!) RX buffer pool. The next initialization will _not_ call qeth_alloc_qdio_queues(), and attempting to back the RX buffers with pages in qeth_init_qdio_queues() will fail. Not very difficult to fix either - instead of re-allocating the whole pool, just allocate/free as many entries to match the desired size. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11s390/qeth: refactor buffer pool codeJulian Wiedmann1-32/+51
In preparation for a subsequent fix, split out helpers to allocate/free individual pool entries. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11s390/qeth: use page pointers to manage RX buffer poolJulian Wiedmann2-19/+18
The RX buffer elements are always backed with full pages, reflect this in the pointer type. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol numberPaolo Lungaroni3-2/+4
The Internet Assigned Numbers Authority (IANA) has recently assigned a protocol number value of 143 for Ethernet [1]. Before this assignment, encapsulation mechanisms such as Segment Routing used the IPv6-NoNxt protocol number (59) to indicate that the encapsulated payload is an Ethernet frame. In this patch, we add the definition of the Ethernet protocol number to the kernel headers and update the SRv6 L2 tunnels to use it. [1] https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it> Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it> Acked-by: Ahmed Abdelsalam <ahmed.abdelsalam@gssi.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: dsa: Don't instantiate phylink for CPU/DSA ports unless neededAndrew Lunn1-3/+9
By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net/packet: tpacket_rcv: do not increment ring index on dropWillem de Bruijn1-6/+7
In one error case, tpacket_rcv drops packets after incrementing the ring producer index. If this happens, it does not update tp_status to TP_STATUS_USER and thus the reader is stalled for an iteration of the ring, causing out of order arrival. The only such error path is when virtio_net_hdr_from_skb fails due to encountering an unknown GSO type. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11sxgbe: Fix off by one in samsung driver strncpy size argDominik Czarnota1-1/+1
This patch fixes an off-by-one error in strncpy size argument in drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in: strncmp(opt, "eee_timer:", 6) the passed string literal: "eee_timer:" has 10 bytes (without the NULL byte) and the passed size argument is 6. As a result, the logic will also accept other, malformed strings, e.g. "eee_tiXXX:". This bug doesn't seem to have any security impact since its present in module's cmdline parsing code. Signed-off-by: Dominik Czarnota <dominik.b.czarnota@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: caif: Add lockdep expression to RCU traversal primitiveAmol Grover1-1/+2
caifdevs->list is traversed using list_for_each_entry_rcu() outside an RCU read-side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning: [ 10.868467] ============================= [ 10.869082] WARNING: suspicious RCU usage [ 10.869817] 5.6.0-rc1-00177-g06ec0a154aae4 #1 Not tainted [ 10.870804] ----------------------------- [ 10.871557] net/caif/caif_dev.c:115 RCU-list traversed in non-reader section!! Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11MAINTAINERS: remove Sathya Perla as Emulex NIC maintainerJakub Kicinski1-1/+0
Remove Sathya Perla, sathya.perla@broadcom.com is bouncing. The driver has 3 more maintainers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: fec: validate the new settings in fec_enet_set_coalesce()Jakub Kicinski1-3/+3
fec_enet_set_coalesce() validates the previously set params and if they are within range proceeds to apply the new ones. The new ones, however, are not validated. This seems backwards, probably a copy-paste error? Compile tested only. Fixes: d851b47b22fc ("net: fec: add interrupt coalescence feature support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroomNathan Chancellor1-3/+1
Clang warns: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2860:9: warning: converting the result of '?:' with integer constants to a boolean always evaluates to 'true' [-Wtautological-constant-compare] return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom, ^ drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:131:34: note: expanded from macro 'DPAA_FD_DATA_ALIGNMENT' \#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16) ^ 1 warning generated. This was exposed by commit 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") even though it appears to have been an issue since the introductory commit 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") since DPAA_FD_DATA_ALIGNMENT has never been able to be zero. Just replace the whole boolean expression with the true branch, as it is always been true. Link: https://github.com/ClangBuiltLinux/linux/issues/928 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11mac80211: Do not send mesh HWMP PREQ if HWMP is disabledNicolas Cavallari1-1/+2
When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for channel switchJakub Kicinski1-0/+1
Add missing attribute validation for NL80211_ATTR_OPER_CLASS to the netlink policy. Fixes: 1057d35ede5d ("cfg80211: introduce TDLS channel switch commands") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-4-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for beacon report scanningJakub Kicinski1-0/+2
Add missing attribute validation for beacon report scanning to the netlink policy. Fixes: 1d76250bd34a ("nl80211: support beacon report scanning") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-3-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for critical protocol indicationJakub Kicinski1-0/+2
Add missing attribute validation for critical protocol fields to the netlink policy. Fixes: 5de17984898c ("cfg80211: introduce critical protocol indication from user-space") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-2-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-10s390/qeth: cancel RX reclaim work earlierJulian Wiedmann3-1/+2
When qeth's napi poll code fails to refill an entirely empty RX ring, it kicks off buffer_reclaim_work to try again later. Make sure that this worker is cancelled when setting the qeth device offline. Otherwise a RX refill action can unexpectedly end up running concurrently to bigger re-configurations (eg. resizing the buffer pool), without any locking. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: handle error when backing RX bufferJulian Wiedmann1-4/+9
qeth_init_qdio_queues() fills the RX ring with an initial set of RX buffers. If qeth_init_input_buffer() fails to back one of the RX buffers with memory, we need to bail out and report the error. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: don't reset default_out_queueJulian Wiedmann1-1/+0
When an OSA device in prio-queue setup is reduced to 1 TX queue due to HW restrictions, we reset its the default_out_queue to 0. In the old code this was needed so that qeth_get_priority_queue() gets the queue selection right. But with proper multiqueue support we already reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic on txq 0 without even calling .ndo_select_queue. Thus we can preserve the user's configuration, and apply it if the OSA device later re-gains support for multiple TX queues. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: macsec: invoke mdo_upd_secy callback when mac address changedDmitry Bogdanov1-0/+13
Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: macsec: update SCI upon MAC address change.Dmitry Bogdanov1-5/+6
SCI should be updated, because it contains MAC in its first 6 octets. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ibmvnic: Do not process device remove during device resetJuliet Kim2-3/+27
The ibmvnic driver does not check the device state when the device is removed. If the device is removed while a device reset is being processed, the remove may free structures needed by the reset, causing an oops. Fix this by checking the device state before processing device remove. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net/smc: cancel event worker during device removalKarsten Graul1-0/+1
During IB device removal, cancel the event worker before the device structure is freed. Fixes: a4cf0443c414 ("smc: introduce SMC as an IB-client") Reported-by: syzbot+b297c6825752e7a07272@syzkaller.appspotmail.com Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interfaceHangbin Liu1-0/+4
Rafał found an issue that for non-Ethernet interface, if we down and up frequently, the memory will be consumed slowly. The reason is we add allnodes/allrouters addressed in multicast list in ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up() for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb getting bigger and bigger. The call stack looks like: addrconf_notify(NETDEV_REGISTER) ipv6_add_dev ipv6_dev_mc_inc(ff01::1) ipv6_dev_mc_inc(ff02::1) ipv6_dev_mc_inc(ff02::2) addrconf_notify(NETDEV_UP) addrconf_dev_config /* Alas, we support only Ethernet autoconfiguration. */ return; addrconf_notify(NETDEV_DOWN) addrconf_ifdown ipv6_mc_down igmp6_group_dropped(ff02::2) mld_add_delrec(ff02::2) igmp6_group_dropped(ff02::1) igmp6_group_dropped(ff01::1) After investigating, I can't found a rule to disable multicast on non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM, tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up() in inetdev_event(). Even for IPv6, we don't check the dev type and call ipv6_add_dev(), ipv6_dev_mc_inc() after register device. So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for non-Ethernet interface. v2: Also check IFF_MULTICAST flag to make sure the interface supports multicast Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> Fixes: 74235a25c673 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels") Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: memcg: late association of sock to memcgShakeel Butt3-15/+24
If a TCP socket is allocated in IRQ context or cloned from unassociated (i.e. not associated to a memcg) in IRQ context then it will remain unassociated for its whole life. Almost half of the TCPs created on the system are created in IRQ context, so, memory used by such sockets will not be accounted by the memcg. This issue is more widespread in cgroup v1 where network memory accounting is opt-in but it can happen in cgroup v2 if the source socket for the cloning was created in root memcg. To fix the issue, just do the association of the sockets at the accept() time in the process context and then force charge the memory buffer already used and reserved by the socket. Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10cgroup: memcg: net: do not associate sock with unrelated cgroupShakeel Butt2-0/+8
We are testing network memory accounting in our setup and noticed inconsistent network memory usage and often unrelated cgroups network usage correlates with testing workload. On further inspection, it seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in irq context specially for cgroup v1. mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context and kind of assumes that this can only happen from sk_clone_lock() and the source sock object has already associated cgroup. However in cgroup v1, where network memory accounting is opt-in, the source sock can be unassociated with any cgroup and the new cloned sock can get associated with unrelated interrupted cgroup. Cgroup v2 can also suffer if the source sock object was created by process in the root cgroup or if sk_alloc() is called in irq context. The fix is to just do nothing in interrupt. WARNING: Please note that about half of the TCP sockets are allocated from the IRQ context, so, memory used by such sockets will not be accouted by the memcg. The stack trace of mem_cgroup_sk_alloc() from IRQ-context: CPU: 70 PID: 12720 Comm: ssh Tainted: 5.6.0-smp-DEV #1 Hardware name: ... Call Trace: <IRQ> dump_stack+0x57/0x75 mem_cgroup_sk_alloc+0xe9/0xf0 sk_clone_lock+0x2a7/0x420 inet_csk_clone_lock+0x1b/0x110 tcp_create_openreq_child+0x23/0x3b0 tcp_v6_syn_recv_sock+0x88/0x730 tcp_check_req+0x429/0x560 tcp_v6_rcv+0x72d/0xa40 ip6_protocol_deliver_rcu+0xc9/0x400 ip6_input+0x44/0xd0 ? ip6_protocol_deliver_rcu+0x400/0x400 ip6_rcv_finish+0x71/0x80 ipv6_rcv+0x5b/0xe0 ? ip6_sublist_rcv+0x2e0/0x2e0 process_backlog+0x108/0x1e0 net_rx_action+0x26b/0x460 __do_softirq+0x104/0x2a6 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.19+0x40/0x50 __local_bh_enable_ip+0x51/0x60 ip6_finish_output2+0x23d/0x520 ? ip6table_mangle_hook+0x55/0x160 __ip6_finish_output+0xa1/0x100 ip6_finish_output+0x30/0xd0 ip6_output+0x73/0x120 ? __ip6_finish_output+0x100/0x100 ip6_xmit+0x2e3/0x600 ? ipv6_anycast_cleanup+0x50/0x50 ? inet6_csk_route_socket+0x136/0x1e0 ? skb_free_head+0x1e/0x30 inet6_csk_xmit+0x95/0xf0 __tcp_transmit_skb+0x5b4/0xb20 __tcp_send_ack.part.60+0xa3/0x110 tcp_send_ack+0x1d/0x20 tcp_rcv_state_process+0xe64/0xe80 ? tcp_v6_connect+0x5d1/0x5f0 tcp_v6_do_rcv+0x1b1/0x3f0 ? tcp_v6_do_rcv+0x1b1/0x3f0 __release_sock+0x7f/0xd0 release_sock+0x30/0xa0 __inet_stream_connect+0x1c3/0x3b0 ? prepare_to_wait+0xb0/0xb0 inet_stream_connect+0x3b/0x60 __sys_connect+0x101/0x120 ? __sys_getsockopt+0x11b/0x140 __x64_sys_connect+0x1a/0x20 do_syscall_64+0x51/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The stack trace of mem_cgroup_sk_alloc() from IRQ-context: Fixes: 2d7580738345 ("mm: memcontrol: consolidate cgroup socket tracking") Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets") Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10MAINTAINERS: update cxgb4vf maintainer to VishalJakub Kicinski1-1/+1
Casey Leedomn <leedom@chelsio.com> is bouncing, Vishal indicated he's happy to take the role. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: mscc: ocelot: properly account for VLAN header length when setting MRUVladimir Oltean2-12/+18
What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()Eric Dumazet1-1/+1
Commit e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") added a cond_resched_rcu() in a loop using rcu protection to iterate over slaves. This is breaking rcu rules, so lets instead use cond_resched() at a point we can reschedule Fixes: e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09cgroup, netclassid: periodically release file_lock on classid updatingDmitry Yakunin1-10/+37
In our production environment we have faced with problem that updating classid in cgroup with heavy tasks cause long freeze of the file tables in this tasks. By heavy tasks we understand tasks with many threads and opened sockets (e.g. balancers). This freeze leads to an increase number of client timeouts. This patch implements following logic to fix this issue: аfter iterating 1000 file descriptors file table lock will be released thus providing a time gap for socket creation/deletion. Now update is non atomic and socket may be skipped using calls: dup2(oldfd, newfd); close(oldfd); But this case is not typical. Moreover before this patch skip is possible too by hiding socket fd in unix socket buffer. New sockets will be allocated with updated classid because cgroup state is updated before start of the file descriptors iteration. So in common cases this patch has no side effects. Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09macvlan: add cond_resched() during multicast processingMahesh Bandewar1-0/+2
The Rx bound multicast packets are deferred to a workqueue and macvlan can also suffer from the same attack that was discovered by Syzbot for IPvlan. This solution is not as effective as in IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing to a workqueue while macvlan does this way only for the Rx. This fix should address the Rx codition to certain extent. Tx is still suseptible. Tx multicast processing happens when .ndo_start_xmit is called, hence we cannot add cond_resched(). However, it's not that severe since the user which is generating / flooding will be affected the most. Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ipvlan: add cond_resched_rcu() while processing muticast backlogMahesh Bandewar1-0/+1
If there are substantial number of slaves created as simulated by Syzbot, the backlog processing could take much longer and result into the issue found in the Syzbot report. INFO: rcu_sched detected stalls on CPUs/tasks: (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752) All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0 syz-executor.1 R running task on cpu 1 10984 11210 3866 0x30020008 179034491270 Call Trace: <IRQ> [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline] [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline] [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline] [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline] [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline] [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline] [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline] [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153 RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12 RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000 RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0 RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273 R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8 R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline] [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline] [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline] [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline] [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline] [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline] [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline] [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102 RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12 RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000 RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005 RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000 R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline] [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline] [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f23c69 RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0 RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1 rcu_sched R running task on cpu 1 13048 8 2 0x90000000 179099587640 Call Trace: [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393 Fixes: ba35f8588f47 (“ipvlan: Defer multicast / broadcast processing to a work-queue”) Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ipvlan: don't deref eth hdr before checking it's setMahesh Bandewar1-8/+10
IPvlan in L3 mode discards outbound multicast packets but performs the check before ensuring the ether-header is set or not. This is an error that Eric found through code browsing. Fixes: 2ad7bf363841 (“ipvlan: Initial check-in of the IPVLAN driver.”) Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09sfc: detach from cb_page in efx_copy_channel()Edward Cree1-0/+1
It's a resource, not a parameter, so we can't copy it into the new channel's TX queues, otherwise aliasing will lead to resource- management bugs if the channel is subsequently torn down without being initialised. Before the Fixes:-tagged commit there was a similar bug with tsoh_page, but I'm not sure it's worth doing another fix for such old kernels. Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Suggested-by: Derek Shute <Derek.Shute@stratus.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09linux-next: DOC: RDS: Fix a typo in rds.txtMasanari Iida1-1/+1
This patch fix a spelling typo in rds.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08inet_diag: return classid for all socket typesDmitry Yakunin5-40/+40
In commit 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") croup classid reporting was fixed. But this works only for TCP sockets because for other socket types icsk parameter can be NULL and classid code path is skipped. This change moves classid handling to inet_diag_msg_attrs_fill() function. Also inet_diag_msg_attrs_size() helper was added and addends in nlmsg_new() were reordered to save order from inet_sk_diag_fill(). Fixes: 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08net: stmmac: dwmac1000: Disable ACS if enhanced descs are not usedRemi Pommarel1-1/+2
ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that there is no need to manually strip it for such packets. The enhanced DMA descriptors allow to flag LLC packets so that the receiving callback can use that to strip FCS manually or not. On the other hand, normal descriptors do not support that. Thus in order to not truncate LLC packet ACS should be disabled when using normal DMA descriptors. Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08gre: fix uninit-value in __iptunnel_pull_headerEric Dumazet1-2/+10
syzbot found an interesting case of the kernel reading an uninit-value [1] Problem is in the handling of ETH_P_WCCP in gre_parse_header() We look at the byte following GRE options to eventually decide if the options are four bytes longer. Use skb_header_pointer() to not pull bytes if we found that no more bytes were needed. All callers of gre_parse_header() are properly using pskb_may_pull() anyway before proceeding to next header. [1] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2303 [inline] BUG: KMSAN: uninit-value in __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 CPU: 1 PID: 11784 Comm: syz-executor940 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 pskb_may_pull include/linux/skbuff.h:2303 [inline] __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 iptunnel_pull_header include/net/ip_tunnels.h:411 [inline] gre_rcv+0x15e/0x19c0 net/ipv6/ip6_gre.c:606 ip6_protocol_deliver_rcu+0x181b/0x22c0 net/ipv6/ip6_input.c:432 ip6_input_finish net/ipv6/ip6_input.c:473 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip6_input net/ipv6/ip6_input.c:482 [inline] ip6_mc_input+0xdf2/0x1460 net/ipv6/ip6_input.c:576 dst_input include/net/dst.h:442 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:306 __netif_receive_skb_one_core net/core/dev.c:5198 [inline] __netif_receive_skb net/core/dev.c:5312 [inline] netif_receive_skb_internal net/core/dev.c:5402 [inline] netif_receive_skb+0x66b/0xf20 net/core/dev.c:5461 tun_rx_batched include/linux/skbuff.h:4321 [inline] tun_get_user+0x6aef/0x6f60 drivers/net/tun.c:1997 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f62d99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000fffedb2c EFLAGS: 00000217 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020002580 RDX: 0000000000000fca RSI: 0000000000000036 RDI: 0000000000000004 RBP: 0000000000008914 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 tun_alloc_skb drivers/net/tun.c:1529 [inline] tun_get_user+0x10ae/0x6f60 drivers/net/tun.c:1843 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: 95f5c64c3c13 ("gre: Move utility functions to common headers") Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08ipvlan: do not add hardware address of master to its unicast filter listJiri Wiesner1-4/+1
There is a problem when ipvlan slaves are created on a master device that is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not support unicast address filtering. When an ipvlan device is brought up in ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware address of the vmxnet3 master device to the unicast address list of the master device, phy_dev->uc. This inevitably leads to the vmxnet3 master device being forced into promiscuous mode by __dev_set_rx_mode(). Promiscuous mode is switched on the master despite the fact that there is still only one hardware address that the master device should use for filtering in order for the ipvlan device to be able to receive packets. The comment above struct net_device describes the uc_promisc member as a "counter, that indicates, that promiscuous mode has been enabled due to the need to listen to additional unicast addresses in a device that does not implement ndo_set_rx_mode()". Moreover, the design of ipvlan guarantees that only the hardware address of a master device, phy_dev->dev_addr, will be used to transmit and receive all packets from its ipvlan slaves. Thus, the unicast address list of the master device should not be modified by ipvlan_open() and ipvlan_stop() in order to make ipvlan a workable option on masters that do not support unicast address filtering. Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver") Reported-by: Per Sundstrom <per.sundstrom@redqube.se> Signed-off-by: Jiri Wiesner <jwiesner@suse.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06rhashtable: Document the right function parametersJonathan Neuschäfer1-1/+1
rhashtable_lookup_get_insert_key doesn't have a parameter `data`. It does have a parameter `key`, however. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06MAINTAINERS: remove bouncing pkaustub@cisco.com from enicJakub Kicinski1-1/+0
pkaustub@cisco.com is bouncing, remove it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.