aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-24net: aquantia: implement data PTP datapathEgor Pomozov1-2/+2
Here we do alloc/free IRQs for PTP rings. We also implement processing of PTP packets on TX and RX sides. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: replace internal driver version code with utsIgor Russkikh1-4/+3
As it was discussed some time previously, driver is better to report kernel version string, as it in a best way identifies the codebase. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23net: aquantia: Increase rx ring default size from 1K to 2KIgor Russkikh1-1/+1
For multigig rates 1K ring size is often not enough and causes extra packet drops in hardware. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: Make RX default frame size 2KIgor Russkikh1-1/+1
This correlates with default internet MTU. This also allows page flip/reuse to be activated, since each allocated RX page now serves for two frags/packets. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: Introduce rx refill threshold valueIgor Russkikh1-0/+2
Before that, we've refilled ring even on single descriptor move. Under high packet load that caused page allocation logic to be triggered too often. That made overall ring processing slower. Moreover, with page buffer reuse implemented, we should give a chance higher networking levels to process received packets faster, release the pages they consumed and therefore give a higher chance for these pages to be reused. RX ring is now refilled only when AQ_CFG_RX_REFILL_THRES or more descriptors were processed (32 by default). Under regular traffic this gives quite enough time for packet to be consumed and page to be reused. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: optimize rx performance by page reuse strategyIgor Russkikh1-0/+2
We introduce internal aq_rxpage wrapper over regular page where extra field is tracked: rxpage offset inside of allocated page. This offset allows to reuse one page for multiple packets. When needed (for example with large frames processing), allocated pageorder could be customized. This gives even larger page reuse efficiency. page_ref_count is used to track page users. If during rx refill underlying page has users, we increase pg_off by rx frame size thus the top half of the page is reused. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: optimize rx path using larger preallocated skb lenIgor Russkikh1-0/+2
Atlantic driver used 14 bytes preallocated skb size. That made L3 protocol processing inefficient because pskb_pull had to fetch all the L3/L4 headers from extra fragments. Specially on UDP flows that caused extra packet drops because CPU was overloaded with pskb_pull. This patch uses eth_get_headlen for skb preallocation. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: aquantia: increase max number of hw queuesDmitry Bogdanov1-1/+1
Increase the upper limit of the hw queues up to 8. This makes RSS better on multiheaded cpus. This is a maximum AQC hardware supports in one traffic class. The actual value is still limited by a number of available cpu cores. Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: aquantia: fix RSS table and key sizesDmitry Bogdanov1-2/+2
Set RSS indirection table and RSS hash key sizes to their real size. Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06net: aquantia: vlan unicast address list correct handlingIgor Russkikh1-2/+0
Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502 ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Add tx clean budget and valid budget handling logicIgor Russkikh1-0/+2
We should report to napi full budget only when we have more job to do. Before this fix, on any tx queue cleanup we forced napi to do poll again. Thats a waste of cpu resources and caused storming with napi polls when there was at least one tx on each interrupt. With this fix we report full budget only when there is more job on TX to do. Or, as before, when rx budget was fully consumed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce new device ids and constantsIgor Russkikh1-1/+7
New set of aquantia devices has an upgraded hardware (B1). The hardware interface is identical to B0. The difference will be in firmware which is incompatible with old one. Reorganized and removed duplicate speed and devid definitions Introduced explicit flow control configuration defines Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Increment driver versionIgor Russkikh1-1/+2
Add a suffix to distinguish kernel mainline version and aquantia releases Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Improve link state and statistics check interval callbackIgor Russkikh1-1/+1
Reduce timeout from 2 secs to 1 sec. If link is down, reduce it to 500msec. This speeds up link detection. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Enable coalescing management via ethtool interfaceIgor Russkikh1-2/+6
Aquantia NIC allows both TX and RX interrupt throttle rate (ITR) management, but this was used in a very limited way via predefined values. This patch allows to setup ITR default values via module command line arguments and via standard ethtool coalescing settings. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26aquantia: Fix Tx queue hangupsIgor Russkikh1-0/+4
Driver did a poor job in managing its Tx queues: Sometimes it could stop tx queues due to link down condition in aq_nic_xmit - but never waked up them. That led to Tx path total suspend. This patch fixes this and improves generic queue management: - introduces queue restart counter - uses generic netif_ interface to disable and enable tx path - refactors link up/down condition and introduces dmesg log event when link changes. - introduces new constant for minimum descriptors count required for queue wakeup Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-04aquantia: Fix driver name reported by ethtoolPavel Belous1-1/+1
V2: using "aquantia" subsystem tag. The command "ethtool -i ethX" should display driver name (driver: atlantic) instead vendor name (driver: aquantia). Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24net: ethernet: aquantia: Common functions and definitionsDavid VomLehn1-0/+77
Add files containing the functions and definitions used in common in different functional areas. Signed-off-by: Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by: Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by: David M. VomLehn <vomlehn@texas.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.