aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/aquantia (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-14net: aquantia: do not pass lro session with invalid tcp checksumDmitry Bogdanov1-1/+2
Individual descriptors on LRO TCP session should be checked for CRC errors. It was discovered that HW recalculates L4 checksums on LRO session and does not break it up on bad L4 csum. Thus, driver should aggregate HW LRO L4 statuses from all individual buffers of LRO session and drop packet if one of the buffers has bad L4 checksum. Fixes: f38f1ee8aeb2 ("net: aquantia: check rx csum for all packets in LRO session") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-14net: aquantia: when cleaning hw cache it should be toggledIgor Russkikh4-6/+53
>From HW specification to correctly reset HW caches (this is a required workaround when stopping the device), register bit should actually be toggled. It was previosly always just set. Due to the way driver stops HW this never actually caused any issues, but it still may, so cleaning this up. Fixes: 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after driver unbind") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-14net: aquantia: temperature retrieval fixIgor Russkikh1-1/+1
Chip temperature is a two byte word, colocated internally with cable length data. We do all readouts from HW memory by dwords, thus we should clear extra high bytes, otherwise temperature output gets weird as soon as we attach a cable to the NIC. Fixes: 8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature") Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-9/+6
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
2019-09-27net: aquantia: Fix aq_vec_isr_legacy() return valueDan Carpenter1-9/+6
The irqreturn_t type is an enum or an unsigned int in GCC. That creates to problems because it can't detect if the self->aq_hw_ops->hw_irq_read() call fails and at the end the function always returns IRQ_HANDLED. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)' Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-20Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds1-2/+0
Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-08-31net: aquantia: fix out of memory condition on rx sideDmitry Bogdanov1-1/+2
On embedded environments with hard memory limits it is a normal although rare case when skb can't be allocated on rx part under high traffic. In such OOM cases napi_complete_done() was not called. So the napi object became in an invalid state like it is "scheduled". Kernel do not re-schedules the poll of that napi object. Consequently, kernel can not remove that object the system hangs on `ifconfig down` waiting for a poll. We are fixing this by gracefully closing napi poll routine with correct invocation of napi_complete_done. This was reproduced with artificially failing the allocation of skb to simulate an "out of memory" error case and check that traffic does not get stuck. Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: linkstate irq should be oneshotIgor Russkikh1-1/+1
Declaring threaded irq handler should also indicate the irq is oneshot. It is oneshot indeed, because HW implements irq automasking on trigger. Not declaring this causes some kernel configurations to fail on interface up, because request_threaded_irq returned an err code. The issue was originally hidden on normal x86_64 configuration with latest kernel, because depending on interrupt controller, irq driver added ONESHOT flag on its own. Issue was observed on older kernels (4.14) where no such logic exists. Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: reapply vlan filters on upDmitry Bogdanov1-0/+4
In case of device reconfiguration the driver may reset the device invisible for other modules, vlan module in particular. So vlans will not be removed&created and vlan filters will not be configured in the device. The patch reapplies the vlan filters at device start. Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix limit of vlan filtersDmitry Bogdanov1-1/+1
Fix a limit condition of vlans on the interface before setting vlan promiscuous mode Fixes: 48dd73d08d4dd ("net: aquantia: fix vlans not working over bridged network") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix removal of vlan 0Dmitry Bogdanov1-1/+2
Due to absence of checking against the rx flow rule when vlan 0 is being removed, the other rule could be removed instead of the rule with vlan 0 Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21treewide: remove dummy Makefiles for single targetsMasahiro Yamada1-2/+0
Now that the single target build descends into sub-directories in the same way as the normal build, these dummy Makefiles are not needed any more. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-8/+23
The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: implement vlan offload configurationIgor Russkikh1-7/+27
set_features should update flags and reinit hardware if vlan offload settings were changed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: vlan offloads logic in datapathIgor Russkikh3-19/+60
Update datapath by adding logic related to hardware assisted vlan strip/insert behaviour. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: adding fields and device features for vlan offloadIgor Russkikh5-10/+22
Updating features and vlan_features with vlan HW offload. Added vlan_tag fields to rx/tx ring_buff to track vlan related data. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: added vlan offload related macros and functionsIgor Russkikh4-0/+46
Register declaration macros required to work with vlan offload mode. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: make all files GPL-2.0-onlyIgor Russkikh4-4/+4
It was noticed some files had -or-later, however overall driver has -only license. Clean this up. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: replace internal driver version code with utsIgor Russkikh2-9/+3
As it was discussed some time previously, driver is better to report kernel version string, as it in a best way identifies the codebase. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: aquantia: fix vlans not working over bridged networkDmitry Bogdanov4-8/+23
In configuration of vlan over bridge over aquantia device it was found that vlan tagged traffic is dropped on chip. The reason is that bridge device enables promisc mode, but in atlantic chip vlan filters will still apply. So we have to corellate promisc settings with vlan configuration. The solution is to track in a separate state variable the need of vlan forced promisc. And also consider generic promisc configuration when doing vlan filter config. Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds33-143/+33
Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-05net: aquantia: fix wol configuration not applied sometimesNikita Danilov2-8/+10
WoL magic packet configuration sometimes does not work due to couple of leakages found. Mainly there was a regression introduced during readx_poll refactoring. Next, fw request waiting time was too small. Sometimes that caused sleep proxy config function to return with an error and to skip WoL configuration. At last, WoL data were passed to FW from not clean buffer. That could cause FW to accept garbage as a random configuration data. Fixes: 6a7f2277313b ("net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic") Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner32-128/+32
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 308Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 12 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.160381502@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27net: aquantia: tcp checksum 0xffff being handled incorrectlyNikita Danilov1-2/+1
Thats a known quirk in windows tcp stack it can produce 0xffff checksum. Thats incorrect but it is. Atlantic HW with LRO enabled handles that incorrectly and changes csum to 0xfffe - but indicates that csum is invalid. This causes driver to pass packet to linux networking stack with CSUM_NONE, stack eventually drops the packet. There is a quirk in atlantic HW to enable correct processing of 0xffff incorrect csum. Enable it. The visible bug is that windows link partner with software generated csums caused TCP connection to be unstable since all packets that csum value are dropped. Reported-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-27net: aquantia: fix LRO with FCS errorDmitry Bogdanov1-29/+32
Driver stops producing skbs on ring if a packet with FCS error was coalesced into LRO session. Ring gets hang forever. Thats a logical error in driver processing descriptors: When rx_stat indicates MAC Error, next pointer and eop flags are not filled. This confuses driver so it waits for descriptor 0 to be filled by HW. Solution is fill next pointer and eop flag even for packets with FCS error. Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-27net: aquantia: check rx csum for all packets in LRO sessionDmitry Bogdanov1-13/+31
Atlantic hardware does not aggregate nor breaks LRO sessions with bad csum packets. This means driver should take care of that. If in LRO session there is a non-first descriptor with invalid checksum (L2/L3/L4), the driver must account this information in csum application logic. Fixes: 018423e90bee8 ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-27net: aquantia: tx clean budget logic errorIgor Russkikh1-3/+4
In case no other traffic happening on the ring, full tx cleanup may not be completed. That may cause socket buffer to overflow and tx traffic to stuck until next activity on the ring happens. This is due to logic error in budget variable decrementor. Variable is compared with zero, and then post decremented, causing it to become MAX_INT. Solution is remove decrementor from the `for` statement and rewrite it in a clear way. Fixes: b647d3980948e ("net: aquantia: Add tx clean budget and valid budget handling logic") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09net: aquantia: fix undefined devm_hwmon_device_register_with_info referenceKefeng Wang1-0/+5
drivers/net/ethernet/aquantia/atlantic/aq_drvinfo.o: In function `aq_drvinfo_init': aq_drvinfo.c:(.text+0xe8): undefined reference to `devm_hwmon_device_register_with_info' Fix it by using #if IS_REACHABLE(CONFIG_HWMON). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: aquantia: Make aq_ndev_driver_name staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/ethernet/aquantia/atlantic/aq_main.c:26:12: warning: symbol 'aq_ndev_driver_name' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: remove outdated device idsNikita Danilov3-12/+0
Some device ids were never released and does not exist. Cleanup these. Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: fixups on 64bit dma countersDmitry Bogdanov6-64/+36
DMA counters are 64 bit and we can fetch that to reduce counter overflow, espesially on byte counters. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: get total counters from DMA blockDmitry Bogdanov1-4/+5
aq_nic_update_ndev_stats pushes statistics to ndev->stats from system interface. This is not always good because it counts packets/bytes before any of rx filters (including mac filter). Its better to report the packet/bytes statistics from DMA counters which gives actual values of data transferred over pci. System level stats is still available via ethtool. Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: fetch up to date statistics on ethtool requestDmitry Bogdanov1-1/+8
This improves ethtool -S usage, where stats are now actual on each request. Before that stats only were updated at service timer period. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: extract timer cb into work jobIgor Russkikh2-6/+20
Service timer callback fetches statistics from FW and that may cause a long delay in error cases. We also now need to use fw mutex to prevent concurrent access to FW, thus - extract that logic from timer callback into the job in the separate work queue. Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: introduce fwreq mutexNikita Danilov4-10/+42
Some of FW operations could be invoked simultaneously, from f.e. ethtool context and from service service activity work. Here we introduce a fw mutex to secure and serialize access to FW logic. Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: user correct MSI irq typeIgor Russkikh1-1/+1
Typo in msi code. No much impact though. Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: use macros for better visibilityIgor Russkikh2-8/+8
Improve for better readability Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: improve ifup link detectionIgor Russkikh1-2/+1
Original code detected link only after 1 sec is passed after up. Here we replace this with direct service callback which updates link status immediately Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: link status irq handlingIgor Russkikh4-19/+50
Here we define and request an extra interrupt line, assign it on link isr handler and restructure abit aq_pci code to better support that. We also remove logic for using different timer intervals depending on link state, since thats now useless. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: create global service workqueueNikita Danilov4-1/+56
We need this to schedule link interrupt handling and various service tasks. Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: link interrupt handling functionIgor Russkikh1-0/+14
Define link interrupt handler Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: add link interrupt fieldsIgor Russkikh2-1/+4
Declare macroes and nic fields to support link interrupt handling Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: implement hwmon api for chip temperatureYana Esina4-0/+144
Added support for hwmon api to fetch out chip temperature Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: add infrastructure to readout chip temperatureYana Esina3-0/+39
Ability to read the chip temperature from memory via hwmon interface Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net: pass net_device argument to the eth_get_headlenStanislav Fomichev1-1/+2
Update all users of eth_get_headlen to pass network device, fetch network namespace from it and pass it down to the flow dissector. This commit is a noop until administrator inserts BPF flow dissector program. Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-23net: aquantia: enable driver build for arm64 or compile_testIgor Russkikh1-1/+2
The driver is now constantly tested in our lab on aarch64 hardware: Jetson tx2, Pascal and Xavier tegra based hardware. Many of tegra smmu related HW bugs were fixed or workarounded already. Thus, add ARM64 into Kconfig. Add also COMPILE_TEST dependency. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: improve LRO configurationNikita Danilov5-2/+46
Default LRO HW configuration was very conservative. Low Number of Descriptors per LRO Sequence, small session timeout, inefficient settings in interrupt generation logic. Change max number of LRO descriptors from 2 to 16 to increase performance. Increase maximum coalescing interval in HW to 250uS. Tune up HW LRO interrupt generation setting to prevent hw issues with long LRO sessions. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: Increase rx ring default size from 1K to 2KIgor Russkikh1-1/+1
For multigig rates 1K ring size is often not enough and causes extra packet drops in hardware. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.