aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-20bnxt_en: Reject driver probe against all bridge devicesRay Jui1-1/+1
There are additional SoC devices that use the same device ID for bridge and NIC devices. The bnxt driver should reject probe against all bridge devices since it's meant to be used with only endpoint devices. Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed*: Fix link indication raceMintz, Yuval6-12/+33
Driver changes the link properties via communication with the management firmware, and re-reads the resulting link status when it receives an indication that the link has changed. However, there are certain scenarios where such indications might be missing, and so driver also re-reads the current link results without attention in several places. Specifically, it does so during load and when resetting the link. This creates a race where driver might reflect incorrect link status - e.g., when explicit reading of the link status is switched by attention with the changed configuration. Correct this flow by a lock syncronizing the handling of the link indications [both explicit requests and attention]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Don't allocate SBs using main PTTMintz, Yuval1-2/+13
Flows accessing registers require the flow to hold a PTT entry. To protect 'major' load/unload flows a main_ptt is pre-allocated to guarantee such flows wouldn't be blocked by PTT being unavailable. Status block initialization currently uses the main_ptt which is incorrect, as this flow might run concurrently to others [E.g., loading qedr while toggling qede]. That would have dire effects as it means registers' access to device breaks and further read/writes might access incorrect addresses. Instead, when initializing status blocks acquire/release a PTT as part of the flow. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qede: Prevent index problems in loopback testSudarsana Reddy Kalluru1-3/+3
Driver currently utilizes the same loop variable in two nested loops. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Reflect PF link when initializing VFMintz, Yuval1-39/+51
VF learns of the current link state via its bulletin board, which might reflect either the physical link state or some user-configured logical state. Whenever the physical link changes or whnever such a configuration is explicitly made by user the PF driver would update the bulletin that the VF reads. But if neither has happened - i.e., PF still hasn't got a physical link up and no additional configuration was done the VF wouldn't have a valid link information available. Simply reflect the physical link state whenever the VF is initialized. The user could then affect it however he wants. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qede: Free netdevice only after stoping slowpathMintz, Yuval1-2/+8
qed needs to be informed of the removal of the qede interface prior to its actual removal, as qede has some registered callbacks that might get called async to the removal flow. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qede: Initialize lock and slowpath workqueue earlyMintz, Yuval1-2/+7
Need to make sure the slowpath workqueue and the qede lock are ready for the registration of the netdevice, as once registered there's no guarantee those wouldn't be used. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Reserve doorbell BAR space for present CPUsRam Amrani1-1/+1
Reserving doorbell BAR space according to the currently active CPUs may result in a bug if disabled CPUs are later enabled but no doorbell space was reserved for them. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Don't free a QP more than onceRam Amrani1-22/+27
If QP is in reset state then there are no resources to free so avoid freeing any. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Read queue state before releasing bufferRam Amrani1-6/+6
Currently the state is read only after the buffers are relesed. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Release CQ resource under lock on failureRam Amrani1-0/+2
The CQ resource pool is protected by a spin lock. When a CQ creation fails it now deallocates under that lock as well. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Copying tx buffers is not needed.Pavel Belous3-95/+97
This fix removes copying of tx biffers. Now we use ring->buff_fing directly. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixed memory allocation if AQ_CFG_RX_FRAME_MAX > 1 page.Pavel Belous1-1/+3
We should allocate the number of pages based on the config parameter AQ_CFG_RX_FRAME_MAX. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixed incorrect buff->len calculation.Pavel Belous2-4/+4
rxd_wb->pkt_len is the total length of the packet. If we received a large packet (with length > AQ_CFG_RX_FRAME_MAX) then we will get multiple buffers. We need to fix the length of the last buffer. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Call netdev_register after all initialized.Pavel Belous2-6/+5
netdev_register should be called when everything is initialized. Also we should use net_device->reg_state field instead own "is_ndev_registered" flag to avoid any race. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Null pointer check for aq_nic_ndev_alloc.Pavel Belous1-3/+4
We should check for a null pointer for aq_nic_ndev_alloc instead netdev_priv. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Using NETDEV_TX_OK instead 0.Pavel Belous1-1/+1
Use NETDEV_TX_OK as the return value for successful transmission. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixed missing rtnl_unlock.Pavel Belous1-2/+3
rtnl_unlock should be called if error occurred. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Superfluous initialization of "err".Pavel Belous1-7/+1
Fixed superfluous initialization of err. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Using module_pci_driver.Pavel Belous1-19/+1
Remove boilerplate code by using macro module_pci_driver. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixes for aq_ndev_change_mtuPavel Belous2-11/+2
1)Removed unnecessary comparsion "old_mtu == new_mtu". This check is not needed. Function aq_ndev_change_mtu wont be called if mtu has not changed. 2)Removed extra assignment ndev->mtu = new_mtu; This assignment already done inside __dev_set_mtu(). 3)Use core MTU checking for min_mtu. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Removed busy_count field.Pavel Belous2-12/+0
busy_count field and is_busy flag is not needed at all. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Removed extra assignment for skb->dev.Pavel Belous1-1/+0
This assignment is not needed. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWNTheodore Ts'o2-5/+5
It's very likely the file system independent ioctl name will be FS_IOC_SHUTDOWN, so let's use the same name for the ext4 ioctl name. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-20net: qlogic: qlge: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-15/+21
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes3-109/+123
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: allow application firmware to limit number of SR-IOV VFsJakub Kicinski2-0/+27
Some application firmware projects may choose to limit the number of VFs available below what is specified in PCI capability to be able to reuse the PCIe interface resources. There may also be projects which use cases don't require SR-IOV support at all and therefore don't want to spend time implementing/testing it. Check nfd_vf_cfg_max_vfs firmware symbol to see if application firmware is reporting how many VFs it supports. This mechanism is an opt-in, if symbol is not present we will only look at the PCI capability values. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: return nfp_rtsym_read_le() errors correctlyJakub Kicinski1-3/+5
nfp_rtsym_read_le() has an out parameter for error codes. We have to use that instead of returning errors directly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: add very basic access to NSP logsJakub Kicinski3-0/+79
Allow dumping "arm.diag" resource with ethtool -w. This resource should contain a text log of the NSP (control processor) application. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: report NSP ABI version in ethtool FW versionJakub Kicinski5-2/+41
ethtool_drvinfo->fw_version can cantain multiple FW strings. We already report NFD ABI version there, add NSP ABI version if available (i.e. on PF) with 'sp:' prefix. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: store NSP ABI version in state structureJakub Kicinski1-14/+13
We read the status register on each NSP open, we can store the NSP ABI version in the state structure so that we don't have to read it again. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: report manufacturing info on loadJakub Kicinski1-0/+7
Report card manufacturing information when driver loads. These identify the version of the board and its subcomponents. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: refactor NSP initialization and add error messageJakub Kicinski1-23/+36
When acquiring NSP communication resource fails user is left with "probe failed with error -2" PCI code message but no info on what caused the problem. Some development boards may not have NSP FW in the flash image. Help users with a more verbouse message. While at it move the whole NSP init to a separate function to keep .probe() callback nice and simple. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: mpls: Add support for netconfDavid Ahern4-3/+214
Add netconf support to MPLS. Allows userpsace to learn and be notified of changes to 'input' enable setting per interface. Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qlcnic: Fix a memory leak in error handling pathChristophe Jaillet1-2/+4
If 'dma_alloc_coherent()' fails, we should release resources allocated so far, just as done in all other cases in this function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: mvpp2: Fix a memory leak in error handling pathChristophe Jaillet1-2/+4
if 'devm_kzalloc()' fails, we should release resources allocated so far, just as done a few lines below. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20mlx4: reduce OOM risk on arches with large pagesEric Dumazet1-1/+2
Since mlx4 NIC are used on PowerPC with 64K pages, we need to adapt MLX4_EN_ALLOC_PREFER_ORDER definition. Otherwise, a fragment sitting in an out of order TCP queue can hold 0.5 Mbytes and it is a serious OOM risk. Fixes: 51151a16a60f ("mlx4: allow order-0 memory allocations in RX path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20ptr_ring: fix race conditions when resizingMichael S. Tsirkin1-5/+31
Resizing currently drops consumer lock. This can cause entries to be reordered, which isn't good in itself. More importantly, consumer can detect a false ring empty condition and block forever. Further, nesting of consumer within producer lock is problematic for tun, since it produces entries in a BH, which causes a lock order reversal: CPU0 CPU1 ---- ---- consume: lock(&(&r->consumer_lock)->rlock); resize: local_irq_disable(); lock(&(&r->producer_lock)->rlock); lock(&(&r->consumer_lock)->rlock); <Interrupt> produce: lock(&(&r->producer_lock)->rlock); To fix, nest producer lock within consumer lock during resize, and keep consumer lock during the whole swap operation. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qla3xxx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-11/+18
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20fsl/fman: fix spelling mistake in variable name en_tsu_err_exeptionColin Ian King1-4/+4
trivial fix to spelling mistake, en_tsu_err_exeption should be en_tsu_err_exception Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20sctp: add support for MSG_MOREXin Long3-6/+5
This patch is to add support for MSG_MORE on sctp. It adds force_delay in sctp_datamsg to save MSG_MORE, and sets it after creating datamsg according to the send flag. sctp_packet_can_append_data then uses it to decide if the chunks of this msg will be sent at once or delay it. Note that unlike [1], this patch saves MSG_MORE in datamsg, instead of in assoc. As sctp enqueues the chunks first, then dequeue them one by one. If it's saved in assoc,the current msg's send flag (MSG_MORE) may affect other chunks' bundling. Since last patch, sctp flush out queue once assoc state falls into SHUTDOWN_PENDING, the close block problem mentioned in [1] has been solved as well. [1] https://patchwork.ozlabs.org/patch/372404/ Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20sctp: flush out queue once assoc state falls into SHUTDOWN_PENDINGXin Long1-0/+4
This patch is to flush out queue when assoc state falls into SHUTDOWN_PENDING if there are still chunks in it, so that the data can be sent out as soon as possible before sending SHUTDOWN chunk. When sctp supports MSG_MORE flag in next patch, this improvement can also solve the problem that the chunks with MSG_MORE flag may be stuck in queue when closing an assoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>