aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-01-17bnx2x: fix GRO parametersYuval Mintz1-24/+23
bnx2x does an internal GRO pass but doesn't provide gso_segs, thus breaking qdisc_pkt_len_init() in case ingress qdisc is used. We store gso_segs in NAPI_GRO_CB(skb)->count, where tcp_gro_complete() expects to find the number of aggregated segments. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: Introduce 2013 and advance version to 1.78.02Yuval Mintz24-26/+26
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: Added FW GRO bridging supportYuval Mintz1-2/+52
Since submit 621b4d6 the bnx2x driver support FW GRO. However, when using the device with GRO enabled in bridging scenarios throughput is very low, as the bridge expects all incoming packets to be passed with CHECKSUM_PARTIAL - a demand which is satisfied by the SW GRO implementation, but was missed in the bnx2x driver implementation (which returned CHECKSUM_UNNECESSARY). Now, given that the traffic is supported by FW GRO (TCP/IP), the bnx2x driver calculates the pseudo checksum by itself, passing skbs with CHECKSUM_PARTIAL and giving a much better throughput when receiving GRO traffic. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: Clean previous IGU status before ackYuval Mintz2-7/+11
When enabling interrupts, acknowledge the interrupt only after configuring the IGU to the correct interrupt mode (otherwise it would dirty selftests) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: improve stop-on-errorYuval Mintz5-76/+79
Get better control over interrupts during panic, and allow FW to test outgoing Tx packets when stop-on-error is allowed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: add `ethtool -w' support.Miriam Shitrit4-1176/+2494
This revises and enhances the bnx2x register dump facilities, adding support for `ethtool -w' on top of `ethtool -d'. Signed-off-by: Miriam Shitrit <miris@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: Added nvram personalities supportYuval Mintz2-0/+11
When a device is configured to act as either iscsi or fcoe device in its nvram, prevent the other from being misused by preventing its activation in the driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: Fix rare self-test failuresYaniv Rosner1-7/+10
On rare occasions, self test link may fail since the link is being sampled while it's still being stabilized. To correct this behaviour, try to sample the link for 2 seconds prior to declaring a failure. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: use SAN Mac for FCoE.Dmitry Kravkov1-1/+1
Current logic causes chips running in switch dependent multi-function FCoE mode not to configure their MAC, leading to an all 0s MAC. This patch configures the interface with the SAN Mac instead. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: Add an additional fatal hw assertion - BRB_HW_INTERRUPTDmitry Kravkov2-0/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15bnx2x: Clear dirty status when booting after UNDIYuval Mintz2-0/+4
Self-tests following boot from SAN have failed as the UNDI driver might leave some NIG interrupt indications. This patch does the clean-up, clearing those indications and allowing the test to pass. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-34/+120
Conflicts: Documentation/networking/ip-sysctl.txt drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c Both conflicts were simply overlapping context. A build fix for qlcnic is in here too, simply removing the added devinit annotations which no longer exist. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14tg3: Fix crc errors on jumbo frame receiveNithin Nayak Sujir1-23/+35
TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14tg3: Avoid null pointer dereference in tg3_interrupt in netconsole modeNithin Nayak Sujir1-0/+4
When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli3-4/+4
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10tg3: missing break statement in tg3_get_5720_nvram_info()Dan Carpenter1-0/+2
There is a missing break statement so FLASH_5762_EEPROM_HD gets treated like FLASH_5762_EEPROM_LD. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bnx2x: Allow management traffic after boot from SANBarak Witkowski1-8/+52
As part of the previous driver unload flow, whenever bnx2x is loaded after the UNDI driver it closes all Rx traffic. However, this leads to management traffic also being stopped until the network interface associated with one of its functions gets loaded. To remedy this, management traffic is re-opened once the 'cleaning' after the previous driver ends. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bnx2x: Fix fastpath structures when memory allocation failsYuval Mintz1-2/+28
When allocating Tx queues, if for some reason (e.g., lack of memory) allocation fails, driver will incorrectly calculate the pointers of the various queues. This patch repositions all pointers in such a case to point at sequential structures in memory, allowing the bnx2x macros to be used correctly when accessing them. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bnx2x: move debugging code before the returnDan Carpenter1-1/+1
I move the return down a line after the debugging printk. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bnx2x: align define usage to satisfy static checkersAriel Elior1-1/+1
Static checkers complained that the E1H_FUNC_MAX define is used incorrectly in bnx2x_pretend_func(). The complaint was justified, although its not a real bug, as the first part of the conditional protects us in this case (a real bug would happen if a VF tried to use the pretend func, but there are no VFs in E1H chips). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09bnx2x: NULL dereference on error in debug codeDan Carpenter1-2/+1
"vfop" is NULL here. I've changed the debugging to not use it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ariel Elior <ariele@broadcom.com> Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09bgmac: driver for GBit MAC core on BCMA busRafał Miłecki4-0/+1888
BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA based SoCs have gigabit ethernet provided by the GBit MAC core. This patch adds driver for such a cores registering itself as a netdev. It has been tested on a BCM4706 and BCM4718 chipsets. In the kernel tree there is already b44 driver which has some common things with bgmac, however there are many differences that has led to the decision or writing a new driver: 1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44) 2) There is 64bit DMA engine which differs from 32bit one 3) There is no CAM (Content Addressable Memory) in GBit MAC 4) We have 4 TX queues on GBit MAC devices (instead of 1) 5) Many registers have different addresses/values 6) RX header flags are also different The driver in it's state is functional how, however there is of course place for improvements: 1) Supporting more net_device_ops 2) SUpporting more ethtool_ops 3) Unaligned addressing in DMA 4) Writing separated PHY driver Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08remove init of dev->perm_addr in driversJiri Pirko4-7/+0
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-07bnx2x: Segregate SR-IOV codeAriel Elior10-844/+953
In this patch the SR-IOV code is segregated from the main bulk of the bnx2x code. The CONFIG_BNX2X_SRIOV define is added to Broadcom's Kconfig, and allows the elision of the building of all the SR-IOV support code in the driver. The define is dependant on the kernel CONFIG_PCI_IOV configuration define. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko1-4/+5
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06tg3: Remove IS_ENABLED(CONFIG_HWMON) checkNithin Nayak Sujir2-6/+4
Commit de0a41484c47d783dd4d442914815076aa2caac2 added Kconfig logic to select HWMON and removed all the IS_ENABLED(CONFIG_HWMON) checks in the tg3.c file. It missed this one check in the header. Update version to 3.129 and update copyright year. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06tg3: Improve PCI function number detection.Michael Chan1-11/+8
Simplify the code to detect PCI function number on 5717, 5719, and 5720. If shared memory does not have proper signature, read the function number from register directly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06tg3: Add NVRAM support for 5762Michael Chan2-1/+110
Detect NVRAM types for 5762 and read OTP firmware version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06tg3: Add support for new 5762 ASICMichael Chan2-25/+81
Add basic support for 5762 which is a 57765_PLUS class device. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04ethernet/broadcom/tg3: Fix sparse warning: constant 0x7fffffffffffffff is so big it is long longPeter Hüwe1-1/+1
Sparse complains that: drivers/net/ethernet/broadcom/tg3.c:5670:55: sparse: constant 0x7fffffffffffffff is so big it is long long (on x86/32 bit) so we suffix the constant with LL in the header file. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko1-1/+0
NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Add VF device ids and enable featureAriel Elior3-10/+99
Add the various VF device ids (of all supported hardware) Add the calls to enable_sriov and disable_sriov to enable the SR-IOV feature. This patch also advances the version and release date of the bnx2x module. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support PF <-> VF Bulletin BoardAriel Elior8-2/+320
The PF <-> VF Bulletin Board is a simple interface between the PF and the VF. The main reason for the Bulletin Board is to allow the PF to be the initiator. The VF publishes at 'acquire' stage the GPA of a Bulletin Board structure it has allocated. The PF notes this GPA in the VF database. The VF samples the Bulletin Board periodically for new messages. The latest version of the BB is always used. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support VF FLRAriel Elior6-7/+321
The FLR indication arrives as an attention from the management processor. Upon VF flr all FLRed function in the indication have already been released by Firmware and now we basically need to free the resources allocated to those VFs, and clean any remainders from the device (FLR final cleanup). Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support of PF driver of a VF release requestAriel Elior5-1/+170
The 'release' request is the opposite of the 'acquire' request. At release, all the resources allocated to the VF are reclaimed. The release flow applies the close flow if applicable. Note that there are actually two types of release: 1. The VF has been removed, and so issued a 'release' request over the VF <-> PF Channel. 2. The PF is going down and so has to release all of it's VFs. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support of PF driver of a VF close requestAriel Elior3-0/+119
The 'close' command is the opposite of an init request. Here the queues of the VF are closed (if any are opened) and released. This flow applies the 'q_teardown' flow on all the queues. The VF state is changed by this request. Interrupts are disabled for the VF when closed. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support of PF driver of a VF q_teardown requestAriel Elior3-0/+295
The 'q_teardown' request is basically the opposite of the 'q_setup'. Here the PF driver removes from the device the queue it opened against the VF fastpath ring at 'setup_q' stage, along with all related rx_mode info. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support of PF driver of a VF q_filters requestAriel Elior3-0/+589
The VF driver uses the 'q_filters' message on the VF <-> PF channel for configuring an open queue, for example when the rxmode changes. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support of PF driver of a VF setup_q requestAriel Elior5-177/+1071
Upon receiving a 'setup_q' request from the VF over the VF <-> PF channel the PF driver will open a corresponding queue in the device. The PF driver configures the queue with appropriate mac address, vlan configuration, etc from the VF. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support statistics collection for VFs by the PFAriel Elior6-93/+217
Statistics are collected by the PF driver. The collection is performed via a query sent to the device which is basically an array of 3-tuples of the form (statistics client, function, DMAE address). In this patch the PF driver adds to the query, on top of the statistics clients it is maintaining for itself (rss queues, storage, etc), the 3-tuples for the VFs it is maintaining. The addresses used are the GPAs of the statistics buffers supplied by the VF in the init message on the VF <-> PF channel. The function parameter ensures that the iommu will translate the GPA to the correct physical address. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support of PF driver of a VF init requestAriel Elior6-3/+190
The VF driver will send an 'init' request as part of its nic load flow. This message is used by the VF to publish the GPA's of its status blocks, slow path ring and statistics buffer. The PF driver notes all this down in the VF database, and also uses this message to transfer the VF to VF_INIT state internally. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support of PF driver of a VF acquire requestAriel Elior6-11/+476
When a VF is probed by the VF driver, the VF driver sends an 'acquire' request over the VF <-> PF channel for the resources it needs to operate (interrupts, queues, etc). The PF driver either ratifies the request and allocates the resources, responds with the maximum values it will allow the VF to acquire, or fails the request entirely if there is a problem. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Infrastructure for VF <-> PF request on PF sideAriel Elior5-45/+664
Support interrupt from device which indicates VF has placed A request on the VF <-> PF channel. The PF driver issues a DMAE to retrieve the request from the VM memory (the Ghost Physical Address of the request is contained in the interrupt. The PF driver uses the GPA in the DMAE request, which is translated by the IOMMU to the correct physical address). The request which arrives is examined to recognize the sending VF. The PF driver allocates a workitem to handle the VF Operation (vfop). Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Prepare device and initialize VF databaseAriel Elior8-51/+535
At nic load of the PF, if VFs may be present, prepare the device for the VFs. Initialize the VF database in preparation of VF arrival. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Allocate VF database in PF when VFs are presentAriel Elior6-1/+570
When A PF determines that it may have to manage SRIOV VFs it allocates a database for this purpose. The database is intended to keep track of the VF state, the resources allocated for each VF (queues, interrupt vectors, etc), the state of the VF's queues. When the VF loads the database is updated accordingly. When A VF closes the database is consulted to determine which resources need to be released (close queues against device, reclaim interrupt vectors, etc). Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: VF fastpathAriel Elior3-51/+50
When VF driver is transmitting it must supply the correct mac address in the parsing BD. This is used for firmware validation and enforcement and also for tx-switching. Refactor interrupt ack flow to allow for different BAR addresses of the hardware in the PF BAR vs the VF BAR. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Support ndo_set_rxmode in VF driverAriel Elior3-6/+179
The VF driver uses the 'q_filter' request in the VF <-> PF channel to have the PF configure the requested rxmode to device. ndo_set_rxmode is called under bottom half lock, so sleeping until the response arrives over the VF <-> PF channel is out of the question. For this reason the VF driver returns from the ndo after scheduling a work item, which in turn processes the rx mode request and adds the classification information through the VF <-> PF channel accordingly. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Add teardown_q and close to VF <-> PF channelAriel Elior4-2/+112
When a VF is being closed its queues are released via the 'teardown_q' and the VF itself is closed with 'close'. These are essentially the unload counterparts of 'init' and 'setup_q' from the load flow. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Add init, setup_q, set_mac to VF <-> PF channelAriel Elior4-0/+310
'init' - init an acquired VF. Supply allocation GPAs to PF. 'setup_q' - PF to allocate a queue in device on behalf of the VF. 'set_mac' - PF to configure a mac in device on behalf of the VF. VF driver uses these requests in the VF <-> PF channel in nic_load flow. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02bnx2x: Separate VF and PF logicAriel Elior6-266/+525
Generally, the VF driver cannot access the chip, except by the narrow window its BAR allows. Care had to be taken so the VF driver will not reach code which accesses the chip elsewhere. Refactor the nic_load flow into parts so it would be easier to separate the VF-only logic from the PF-only logic. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.