aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/brocade/bna/bnad.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-06-11bna: use netdev_* and dev_* instead of printk and pr_*Ivan Vecera1-30/+16
...and remove some of them. It is not necessary to log when .probe() and .remove() are called or when TxQ is started or stopped. Also log level of some of them was changed to more appropriate one (link up/down, firmware loading failure. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: fix timeout API argument typeIvan Vecera1-4/+4
Timeout functions are defined with 'void *' ptr argument. They should be defined directly with 'struct bfa_ioc *' type to avoid type conversions. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove useless pointer assignmentIvan Vecera1-1/+0
Pointer cmpl used to iterate through completion entries is updated at the beginning of while loop as well as at the end. The update at the end of the loop is useless. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove unused cbfn parameterIvan Vecera1-10/+8
removed: bna_rx_ucast_add bna_rx_ucast_del simplified: bna_enet_pause_config bna_rx_mcast_delall bna_rx_mcast_listset bna_rx_mode_set bna_rx_ucast_listset bna_rx_ucast_set Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: get rid of mac_tIvan Vecera1-5/+5
The patch converts mac_t type to widely used 'u8 [ETH_ALEN]'. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: use ether_addr_copy instead of memcpyIvan Vecera1-12/+10
Parameters of all ether_addr_copy instances were checked for proper alignment. Alignment of bnad_bcast_addr is forced to 2 as the implicit alignment is 1. I have also renamed address parameter of bnad_set_mac_address() to addr. The name mac_addr was a little bit confusing as the real parameter is struct sockaddr *. v2: added __aligned directive to bnad_bcast_addr, renamed parameter of bnad_set_mac_address() (thx joe@perches.com) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30bna: remove unreasonable iocpf timer startIvan Vecera1-4/+0
Driver starts iocpf timer prior bnad_ioceth_enable() call and this is unreasonable. This piece of code probably originates from Brocade/Qlogic out-of-box driver during initial import into upstream. This driver uses only one timer and queue to implement multiple timers and this timer is started at this place. The upstream driver uses multiple timers instead of this. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21bna: QLogic BR-series Adapters Driver RebrandingRasesh Mody1-5/+6
Re-brand the BNA driver to QLogic. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-2/+2
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16bna: use netdev_rss_key_fill() helperEric Dumazet1-1/+1
Use netdev_rss_key_fill() helper, as it provides better support for some bonding setups. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17bna: fix skb->truesize underestimationEric Dumazet1-1/+1
skb->truesize is not meant to be tracking amount of used bytes in an skb, but amount of reserved/consumed bytes in memory. For instance, if we use a single byte in last page fragment, we have to account the full size of the fragment. skb->truesize can be very different from skb->len, that has a very specific safety purpose. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07bna: allow transmit tagged framesIvan Vecera1-1/+1
When Tx VLAN offloading is disabled frames with size ~ MTU are not transmitted as the driver does not account 4 bytes of VLAN header added by stack. It should use VLAN_ETH_HLEN instead of ETH_HLEN. The second problem is with newer BNA chips (BNA 1860). These chips filter out any VLAN tagged frames in Tx path. This is a problem when Tx VLAN offloading is disabled and frames are tagged by stack. Older chips like 1010/1020 are not affected as they probably don't do such filtering. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25bna: Support TSO and partial checksum with non-accelerated vlans.Vlad Yasevich1-3/+4
This device claims TSO and checksum support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to support TSO. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO information. This results in corrupted frames sent on the wire. This patch extract the protocol value correctly and corrects TSO and checksums for non-accelerated traffic. CC: Rasesh Mody <rmody@brocade.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-30bna: fix performance regressionIvan Vecera1-1/+1
The recent commit "e29aa33 bna: Enable Multi Buffer RX" is causing a performance regression. It does not properly update 'cmpl' pointer at the end of the loop in NAPI handler bnad_cq_process(). The result is only one packet / per NAPI-schedule is processed. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra1-3/+3
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-29bna: remove open-coded skb_cow_head.françois romieu1-6/+4
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24bnad: Call dev_kfree_skb_any instead of dev_kfree_skb.Eric W. Biederman1-8/+8
Replace dev_kfree_skb with dev_kfree_skb_any in bnad_start_xmit that can be called in hard irq and other contexts. dev_kfree_skb_any is used as bnad_start_xmit only frees skbs when to drop them, normally transmitted packets are handled elsewhere. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-12brocade: Convert uses of __constant_<foo> to <foo>Joe Perches1-10/+6
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-10/+30
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28bna: fix vlan tag stripping and implement its togglingIvan Vecera1-10/+30
The recent commit "fe1624c bna: RX Filter Enhancements" disables VLAN tag stripping if the NIC is in promiscuous mode. This causes __vlan_hwaccel_put_tag() is called when the stripping is disabled. Because of this VLAN over bna does not work and causes BUGs in conjunction with openvswitch like this: Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18bna: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-14/+9
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Rasesh Mody <rmody@brocade.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16bnad: code cleanupstephen hemminger1-1/+1
Use 'make namespacecheck' to code that could be declared static. After that remove code that is not being used. Compile tested only. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06bna: Fix build due to missing use of dma_unmap_len_set()David S. Miller1-2/+2
> as reported for linux-next of Dec.20, 2013 > when CONFIG_NEED_DMA_MAP_STATE is not enabled: > > drivers/net/ethernet/brocade/bna/bnad.c: In function 'bnad_start_xmit': > drivers/net/ethernet/brocade/bna/bnad.c:3074:26: error: 'struct bnad_tx_vector' has no member named 'dma_len' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: Embed SKB Length in TX VectorRasesh Mody1-2/+4
- Store the length of the skb buffer mapped along with the handle and use it while unmapping the buffer. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: Handle the TX Setup FailuresRasesh Mody1-2/+10
Change details: - When bnad_setup_tx() returns NULL, the error is NOT returned to the caller. The caller will incorrectly assume success. So Return ENOMEM when bna_tx_create() fails. - If bnad_tx_msix_register() fails, call bna_tx_destroy() to free tx & to NULL the bnad reference to tcb. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: Add NULL Check Before Dereferencing TCBRasesh Mody1-5/+5
Currently we already check to see whether the BNAD_TXQ_TX_STARTED cleared. But if the tcb structure which contains this flag is also already freed by that time, we would dereference the NULL pointer. This patch is to check tcb for NULL pointer, before dereferencing it. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: CQ Read FixRasesh Mody1-1/+22
Valid bit check for completion needs read fence, so that it does not get reordered with other loads. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: RX Processing and Config ChangesRasesh Mody1-0/+5
Change Details: - Prefetch header in GRO path. This reduces napi_frags_skb time from 9% to 5%. - Changed the configurable limit of RxQ depth to 16384 (was 2048). - bnad_rx_unmap_q elements are cachealigned. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: Enable Multi Buffer RXRasesh Mody1-83/+250
The CT2 HW supports multi-buffer Rx. This patch provides the necessary changes for bnad to use multi-buffer Rx feature. For BNAD, multi-buffer Rx is by default enabled when MTU is > 4096. For >4096 MTU, q0 data/large buffers are of 2048 size. As the resource requirements of multi-buffer Rx are different new Rx needs to be created to use this feature. ASIC posts multiple completions if frame exceeds buffer size. The last completion is marked with EOP flag. - Separate HQ and DQ enums for resource allocations and configurations. - rx_config and rxq structure changes to pass the correct info from bnad. - DQ depth need not be same as HQ depth. So CQ depth is adjusted accordingly. - Rx CFG frame size is taken from configured MTU. - Rx q0 buffer size is configured from bnad s rx_config when multi-buffer is enabled. - Poll for entire frame completion. - Once EOP completion is received gather the number of vectors used by the frame to submit it to the stack. - Changed MTU to frame size wherever necessary. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: RX Filter EnhancementsRasesh Mody1-53/+110
Change Details: - Added bna_rx_ucast_listset() for synchronous ucast listadd operation. - Clear mac->handle before adding it to free_q. - bnad_set_rx_mode() rewritten. bnad_set_rx_mode() adds the MACs in uc_list to UCAM. If it exceeds the max supported, DEFAULT mode is turned on. If MCAM limit is exceeded, ALLMULTI mode is turned on. - Clear CF flags, check for the new mode and reprogram the Rx approach. - Added bnad_set_rx_ucast_fltr() and bnad_set_rx_mcast_fltr(). - Check for IFF_PROMISC to set the correct mode. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18bna: Add software timestamping supportRasesh Mody1-0/+2
- Invoke skb_tx_timestamp() API just before invoking txq_doorbell() - Add ethtool (-T) support Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17bnad: make local variable staticstephen hemminger1-1/+1
Compile tested only. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: bna: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-9/+4
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-10-18net: bna: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17DMA-API: net: brocade/bna/bnad.c: fix 32-bit DMA mask handlingRussell King1-9/+4
The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { *using_dac = true; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) goto release_regions; } This means we only try and set the coherent DMA mask if we failed to set a 32-bit DMA mask, and only if both fail do we fail the driver. Adjust this so that if either setting fails, we fail the driver - and thereby end up properly setting both the DMA mask and the coherent DMA mask in the fallback case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-20bna: Clear Driver Config Flags When HW ResetsRasesh Mody1-0/+3
Driver configuration flags are retained across open/stop operations preventing configurations to be set in next open/stop. Setting MTU on a 1020 causes network to fail until a reboot is performed on the host. Clear the flags when configuration resets in hardware. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-13bna: add missing iounmap() on error in bnad_init()Wei Yongjun1-2/+3
Add the missing iounmap() before return from bnad_init() in the error handling case. Introduced by commit 01b54b1451853593739816a392485c4e2bee7dda (bna: tx rx cleanup fix). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy1-1/+1
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy1-4/+2
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-2/+2
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0)Joe Perches1-3/+2
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Rx Page Based AllocationRasesh Mody1-64/+254
Change Details: Enhanced support for GRO. Page-base allocation method for Rx buffers is used in GRO. Skb allocation has been removed in Rx path to use always warm-cache skbs provided by napi_get_frags. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Tx and Rx OptimizationsRasesh Mody1-394/+294
Change details: - Have contiguous queue pages for TxQ, RxQ and CQ. Data structure and QPT changes related to contiguous queue pages - Optimized Tx and Rx unmap structures. Tx and Rx fast path changes due to unmap data structure changes - Re-factored Tx and Rx fastpath routines as per the new queue data structures - Implemented bnad_txq_wi_prepare() to program the opcode, flags, frame_len and num_vectors in the work item - Reduced Max TxQ and RxQ depth to 2048 while default value for Tx/Rx queue depth is unaltered (512) Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Code Cleanup and EnhancementsRasesh Mody1-15/+28
Change details: - Remove unnecessary prefetch - Simplify checking & comparison of CQ flags - Dereference & store unmap_array, unmap_cons & current unmap_array element only once - Make structures tx_config & rx_config cache line aligned. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bna: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Rasesh Mody <rmody@brocade.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27bna: Fix warning false positive.David S. Miller1-0/+1
GCC can't see that in all non-error-return paths we do in fact set *using_dac to something. Add an explicit initialization to remove this warning: drivers/net/ethernet/brocade/bna/bnad.c: In function ‘bnad_pci_probe’: drivers/net/ethernet/brocade/bna/bnad.c:3079:5: warning: ‘using_dac’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/brocade/bna/bnad.c:3233:7: note: ‘using_dac’ was declared here Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix non-kernel-doc comments with kernel-doc start markersBen Hutchings1-8/+4
Convert doxygen (or similar) formatted comments to kernel-doc or unformatted comment. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-3/+1
Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.