aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cadence/at91_ether.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-05-27net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12net/at91_ether: fix error return code in at91ether_probe()Wei Yongjun1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02net/cadence/at91_ether: Simplify OF dependenciesGuenter Roeck1-38/+6
With of_get_mac_address() and of_get_phy_mode() now defined as dummy functions if OF_NET is not configured, it is no longer necessary to provide OF dependent functions as front-end. Also, the two functions depend on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end functions and call of_get_mac_address() and of_get_phy_mode() directly instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches1-11/+8
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09drivers:net: Remove unnecessary OOM messages after netdev_alloc_skbJoe Perches1-1/+0
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-05net: at91_ether: use module_platform_driver_probe()Jingoo Han1-12/+1
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03net/cadence: remove __dev* attributesBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-19net/ethernet: remove useless is_valid_ether_addr from drivers ndo_openJoachim Eastwood1-3/+0
If ndo_validate_addr is set to the generic eth_validate_addr function there is no point in calling is_valid_ether_addr from driver ndo_open if ndo_open is not used elsewhere in the driver. With this change is_valid_ether_addr will be called from the generic eth_validate_addr function. So there should be no change in the actual behavior. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: fix comment and style issuesJoachim Eastwood1-60/+51
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: clean up print outsJoachim Eastwood1-10/+7
Convert all printk's to netdev_ counterparts and fix up some printed texts. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: drop board_data private struct memberJoachim Eastwood1-2/+0
No longer used after gpio phy interrupt support was removed from at91_ether. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: use stat function from macbJoachim Eastwood1-41/+8
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: use macb functions for get/set hwaddrJoachim Eastwood1-109/+3
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06net: at91_ether: add pinctrl supportJean-Christophe PLAGNIOL-VILLARD1-0/+11
If no pinctrl available just report a warning as some architecture may not need to do anything. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06net: at91_ether: add dt supportJean-Christophe PLAGNIOL-VILLARD1-7/+66
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net/macb: clean up ring buffer logicHavard Skinnemoen1-3/+3
Instead of masking head and tail every time we increment them, just let them wrap through UINT_MAX and mask them when subscripting. Add simple accessor functions to do the subscripting properly to minimize the chances of messing this up. This makes the code slightly smaller, and hopefully faster as well. Also, doing the ring buffer management this way will simplify things a lot when making the ring sizes configurable in the future. Available number of descriptors in ring buffer function by David Laight. Signed-off-by: Havard Skinnemoen <havard@skinnemoen.net> [nicolas.ferre@atmel.com: split patch in topics, adapt to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23net/at91_ether: add pdata flag for reverse Eth addrJoachim Eastwood1-3/+2
This will allow us to remove the last mach include from at91_ether and also make it easier to share address setup with macb. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-19net/at91_ether: convert to devm_* functionsJoachim Eastwood1-18/+7
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: clean up rx buffer handlingJoachim Eastwood1-38/+68
This patch does two things: * Use macb struct members and remove at91_ether ones * Alloc DMA buffers on netdev start and dealloc on stop Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb dma description structJoachim Eastwood1-3/+3
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: share macb_set_rx_mode with macbJoachim Eastwood1-106/+1
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use ethtool and mdio from macbJoachim Eastwood1-605/+31
This rips out the at91_ether phy handling and ethtool stuff and replace it with equivalent stuff from macb. The only thing lost is the phy irq support from at91_ether, but this can be added to macb and then benefit all users. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use pclk member instead of ether_clkJoachim Eastwood1-12/+12
Remove old at91_priv member and use pclk member from macb. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether/macb: absorb at91_private in to macb private structJoachim Eastwood1-35/+35
This will make it easier to share code between the drivers and eventually merge them into one driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb defs for rx dma buffersJoachim Eastwood1-4/+4
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb access functionsJoachim Eastwood1-81/+63
Use macb read/write funtions and remove the old at91_ether ones. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb register definitionsJoachim Eastwood1-80/+84
Use register and bits definitions from the macb header. This makes it possible to have one header file for this hardware. Process was scripted and the resulting object file has the same checksum. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-09-20at91ether: return PTR_ERR if call to clk_get failsDevendra Naga1-1/+1
we are currently returning ENODEV, as the clk_get may give a exact error code in its returned pointer, assign it to the ret by using the PTR_ERR function, so that the subsequent goto label will jump to the error path and clean the driver and return the error correctly. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-28net/at91_ether: use gpio_to_irq for phy IRQ lineNicolas Ferre1-4/+4
Use the gpio_to_irq() function to retrieve the phy IRQ line from the GPIO pin specification. This fix is needed now that we have moved to irqdomains on AT91. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <avictor.za@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-28AT91: Remove fixed mapping for AT91RM9200 ethernetAndrew Victor1-243/+284
The AT91RM9200 Ethernet controller still has a fixed IO mapping. So: * Remove the fixed IO mapping and AT91_VA_BASE_EMAC definition. * Pass the physical base-address via platform-resources to the driver. * Convert at91_ether.c driver to perform an ioremap(). * Ethernet PHY detection needs to be performed during the driver initialization process, it can no longer be done first. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi1-1/+1
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16net/at91_ether: use gpio_is_valid for phy IRQ lineNicolas Ferre1-10/+13
Use the generic gpiolib gpio_is_valid() function to test if the phy IRQ line GPIO is actually provided. For non-connected or non-existing phy IRQ lines, -EINVAL value is used for phy_irq_pin field of struct at91_eth_data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: David S. Miller <davem@davemloft.net>
2011-11-22macb: unify at91 and avr32 platform dataJamie Iles1-1/+2
Both at91 and avr32 defines its own platform data structure for the macb driver and both share common structures though at91 includes a currently unused phy_irq_pin. Create a common macb_platform_data for macb that both at91 and avr32 can use. In future we can use this to support other architectures that use the same IP block with the macb driver. v2: rename eth_platform_data to macb_platform_data and allow at91_ether to share the platform data with macb. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-10-27Merge branch 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-armLinus Torvalds1-1/+1
* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko1-1/+1
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12macb: Move the Atmel driverJeff Kirsher1-0/+1254
Move the Atmel driver into drivers/net/ethernet/cadence/ and make the necessary Kconfig and Makefile changes. CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.