aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cadence (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2012-07-10net: calxedaxgmac: fix net timeout recoveryRob Herring1-0/+1
Fix net tx watchdog timeout recovery. The descriptor ring was reset, but the DMA engine was not reset to the beginning of the ring. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ll_temac: remove unnecessary setting of skb->devJon Mason1-1/+0
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10sunhme: remove unnecessary setting of skb->devJon Mason1-3/+0
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10sungem: remove unnecessary setting of skb->devJon Mason1-1/+0
skb->dev is being unnecessarily set by the driver's skb alloc routine (which is called in init and during rx). It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10sunbmac: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlcnic: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ksz884x: remove unnecessary setting of skb->devJon Mason1-3/+1
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10lantiq_etop: remove unnecessary setting of skb->devJon Mason1-1/+0
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10netxen: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10enic: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set after calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10lance: remove unnecessary setting of skb->devJon Mason1-3/+2
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10vxge/s2io: remove dead URLsJon Mason4-24/+3
URLs to neterion.com and s2io.com no longer resolve. Remove all references to these URLs in the driver source and documentation. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv6: optimize ipv6 addresses comparesEric Dumazet1-1/+23
On 64 bit arches having efficient unaligned accesses (eg x86_64) we can use long words to reduce number of instructions for free. Joe Perches suggested to change ipv6_masked_addr_cmp() to return a bool instead of 'int', to make sure ipv6_masked_addr_cmp() cannot be used in a sorting function. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix non-kernel-doc comments with kernel-doc start markersBen Hutchings36-892/+342
Convert doxygen (or similar) formatted comments to kernel-doc or unformatted comment. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings44-410/+378
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix non-kernel-doc comments with kernel-doc start markerBen Hutchings4-17/+8
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings46-103/+163
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Properly define functions with no parametersBen Hutchings2-2/+2
Defining a function with no parameters as 'T foo()' is the deprecated K&R style, and is not strictly equivalent to defining it as 'T foo(void)'. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Remove inetpeer from routes.David S. Miller3-118/+6
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Calling ->cow_metrics() now is a bug.David S. Miller1-28/+2
Nothing every writes to ipv4 metrics any longer. PMTU is stored in rt->rt_pmtu. Dynamic TCP metrics are stored in a special TCP metrics cache, completely outside of the routes. Therefore ->cow_metrics() can simply nothing more than a WARN_ON trigger so we can catch anyone who tries to add new writes to ipv4 route metrics. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Kill dst_copy_metrics() call from ipv4_blackhole_route().David S. Miller1-1/+0
Blackhole routes have a COW metrics operation that returns NULL always, therefore this dst_copy_metrics() call did absolutely nothing. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Enforce max MTU metric at route insertion time.David S. Miller2-6/+3
Rather than at every struct rtable creation. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Maintain redirect and PMTU info in struct rtable again.David S. Miller5-154/+41
Maintaining this in the inetpeer entries was not the right way to do this at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10rtnetlink: Remove ts/tsage args to rtnl_put_cacheinfo().David S. Miller5-10/+5
Nobody provides non-zero values any longer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10inet: Kill FLOWI_FLAG_PRECOW_METRICS.David S. Miller6-18/+6
No longer needed. TCP writes metrics, but now in it's own special cache that does not dirty the route metrics. Therefore there is no longer any reason to pre-cow metrics in this way. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10inet: Minimize use of cached route inetpeer.David S. Miller5-22/+35
Only use it in the absolutely required cases: 1) COW'ing metrics 2) ipv4 PMTU 3) ipv4 redirects Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10inet: Remove ->get_peer() method.David S. Miller3-33/+0
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Remove tw->tw_peerDavid S. Miller2-15/+2
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Move timestamps from inetpeer to metrics cache.David S. Miller9-127/+149
With help from Lin Ming. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Kill set_dst_metric_rtt().David S. Miller1-6/+0
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Don't report route RTT metric value in cache dumps.David S. Miller2-18/+15
We don't maintain it dynamically any longer, so reporting it would be extremely misleading. Report zero instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Maintain dynamic metrics in local cache.David S. Miller4-93/+468
Maintain a local hash table of TCP dynamic metrics blobs. Computed TCP metrics are no longer maintained in the route metrics. The table uses RCU and an extremely simple hash so that it has low latency and low overhead. A simple hash is legitimate because we only make metrics blobs for fully established connections. Some tweaking of the default hash table sizes, metric timeouts, and the hash chain length limit certainly could use some tweaking. But the basic design seems sound. With help from Eric Dumazet and Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Abstract back handling peer aliveness test into helper function.David S. Miller4-2/+13
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Move dynamnic metrics handling into seperate file.David S. Miller4-187/+199
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10etherdevice: introduce eth_broadcast_addrJohannes Berg1-0/+11
A lot of code has either the memset or an inefficient copy from a static array that contains the all-ones broadcast address. Introduce eth_broadcast_addr() to fill an address with all ones, making the code clearer and allowing us to get rid of some constant arrays. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Fix crashes in fib_rules_tclass().David S. Miller1-0/+1
All paths assume, when CONFIG_IP_MULTIPLE_TABLES is enabled, that any successful call to fib_lookup() will initialize the fib_result->r value to something. We violated that expectation in the new fib_lookup() fast path. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09net/fsl_pq_mdio: use spin_event_timeout() to poll the indicator registerTimur Tabi1-10/+19
Macro spin_event_timeout() was designed for simple polling of hardware registers with a timeout, so use it when we poll the MIIMIND register. This allows us to return an error code instead of polling indefinitely. Note that PHY_INIT_TIMEOUT is a count of loop iterations, so we can't use it for spin_event_timeout(), which asks for microseconds. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09smsc95xx: support ethtool get_regsEmeric Vigier1-0/+31
Inspired by implementation in smsc911x.c and smsc9420.c Tested on ARM/pandaboard running android Signed-off-by: Emeric Vigier <emeric.vigier@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09r6040: use module_pci_driver macroDevendra Naga1-14/+1
as the manual of module_pci_driver says that it can be used when the init and exit functions of the module does nothing but the pci_register_driver and pci_unregister_driver. use it for rdc's r6040 driver, as the init and exit paths does as above, and also this reduces a little amount of code. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09bnx2x: populate skb->l4_rxhashEric Dumazet2-4/+16
l4_rxhash is set on skb when rxhash is obtained from canonical 4-tuple over transport ports/addresses. We can set skb->l4_rxhash for all incoming TCP packets on bnx2x for free, as cqe status contains a hash type information. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09r8169: support RTL8168GHayes Wang1-0/+291
For RTL8111G, the settings of phy and firmware are replaced with ocp functions. r8168g_mdio_{write / read} redirects the relative settings to suitable ocp functions. A per-device variable is needed to evaluate the real address of ocp functions. rtl_writephy(tp, 0x1f, xxxx) is dedicated to keeping said variable up-to-date. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2012-07-09r8169: abstract out loop conditions.Francois Romieu1-181/+186
Twelve functions can fail silently. Now they have a chance to complain. Macro and pasting abuse has been kept at a level where tags and friends should not be hurt. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-07-09r8169: ephy, eri and efuse functions signature changes.Francois Romieu1-111/+100
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-07-09r8169: csi_ops signature change.Francois Romieu1-11/+12
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-07-09r8169: mdio_ops signature change.Francois Romieu1-20/+26
Further changes need more context down in the call stack. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-07-09r8169: add RTL8106E support.Hayes Wang1-0/+56
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2012-07-09small cleanup in ax25_addr_parse()Dan Carpenter1-2/+4
The comments were wrong here because "AX25_MAX_DIGIS" is 8 but the comments say 6. Also I've changed the "7" to "AX25_ADDR_LEN". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09be2net: Fix EndianLi RongQing1-1/+1
ETH_P_IP is host Endian, skb->protocol is big Endian, when compare them, we should change ETH_P_IP from host endian to big endian, htons, not ntohs. CC: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09bcm87xx: fix reg-init comment typoPeter Korsgaard1-1/+1
broadcom, not marvell. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.