aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cadence (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-07-09net/macb: manage carrier state with call to netif_carrier_{on|off}()Nicolas Ferre1-2/+11
OFF carrier state is setup in probe() open() and suspend() functions. The carrier ON state is managed in macb_handle_link_change(). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-28net/at91_ether: use gpio_to_irq for phy IRQ lineNicolas Ferre1-4/+4
Use the gpio_to_irq() function to retrieve the phy IRQ line from the GPIO pin specification. This fix is needed now that we have moved to irqdomains on AT91. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <avictor.za@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-28AT91: Remove fixed mapping for AT91RM9200 ethernetAndrew Victor2-243/+285
The AT91RM9200 Ethernet controller still has a fixed IO mapping. So: * Remove the fixed IO mapping and AT91_VA_BASE_EMAC definition. * Pass the physical base-address via platform-resources to the driver. * Convert at91_ether.c driver to perform an ioremap(). * Ethernet PHY detection needs to be performed during the driver initialization process, it can no longer be done first. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04macb: Support the get_ts_info ethtool method.Richard Cochran1-0/+1
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka1-1/+1
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi1-1/+1
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi1-1/+1
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches1-3/+1
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-10macb: use an unique MDIO bus name.Florian Fainelli1-1/+2
Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-21net: macb: fix build break with !CONFIG_OFOlof Johansson1-0/+1
This fixes the build of the macb driver that was broken by the DT changes: drivers/net/ethernet/cadence/macb.c:1503: error: implicit declaration of function 'of_match_ptr' drivers/net/ethernet/cadence/macb.c:1503: error: 'macb_dt_ids' undeclared here (not in a function) drivers/net/ethernet/cadence/macb.c:1503: error: initializer element is not constant drivers/net/ethernet/cadence/macb.c:1503: error: (near initialization for 'macb_driver.driver.of_match_table') Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-12-16Merge branch 'at91/macb' into next/driversArnd Bergmann3-18/+80
2011-12-16net/at91_ether: use gpio_is_valid for phy IRQ lineNicolas Ferre1-10/+13
Use the generic gpiolib gpio_is_valid() function to test if the phy IRQ line GPIO is actually provided. For non-connected or non-existing phy IRQ lines, -EINVAL value is used for phy_irq_pin field of struct at91_eth_data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: David S. Miller <davem@davemloft.net>
2011-12-16net/macb: add DT support for Cadence macb/gem driverJean-Christophe PLAGNIOL-VILLARD2-8/+67
Allow the device tree to provide the mac address and the phy mode. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: change "compatible" node property, doc and DT hwaddr] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [jamie@jamieiles.com: add "gem" compatibility strings and doc] Acked-by: Jamie Iles<jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net>
2011-12-06Merge branch 'mxs/saif' into next/driversArnd Bergmann1-0/+1
Conflicts: drivers/net/ethernet/cadence/Kconfig
2011-11-22macb: allow GEM to have configurable receive buffer sizeJamie Iles2-0/+22
GEM has configurable receive buffer sizes so requires this to be programmed up. Any size < 2048 and a multiple of 64 bytes is permitted. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: support DMA bus widths > 32 bitsJamie Iles2-0/+42
Some GEM implementations may support DMA bus widths up to 128 bits. We can get the maximum supported DMA bus width from the design configuration register so use that to program the device up. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: support statistics for GEM devicesJamie Iles2-4/+107
GEM devices have a different number of statistics registers and they are at a different offset to MACB devices. Make the statistics collection method dependent on device type. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: support higher rate GEM MDIO clock divisorsJamie Iles2-11/+55
GEM devices support larger clock divisors and have a different range of divisors. Program the MDIO clock divisors based on the device type. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: initial support for Cadence GEMJamie Iles3-26/+94
The Cadence GEM is based on the MACB Ethernet controller but has a few small changes with regards to register and bitfield placement. This patch detects the presence of a GEM by reading the module ID register and setting a flag appropriately. This handles the new HW address, USRIO and hash register base register locations in GEM. v3: - convert to macb_is_gem() inline rather than storing a boolean flag - handle rx_overrun stats for gem Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: convert printk to netdev_ and friendsJamie Iles1-64/+56
macb is already using the dev_dbg() and friends helpers so use netdev_() along with a pr_fmt() definition to make the printing a little cleaner. Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: unify at91 and avr32 platform dataJamie Iles3-8/+9
Both at91 and avr32 defines its own platform data structure for the macb driver and both share common structures though at91 includes a currently unused phy_irq_pin. Create a common macb_platform_data for macb that both at91 and avr32 can use. In future we can use this to support other architectures that use the same IP block with the macb driver. v2: rename eth_platform_data to macb_platform_data and allow at91_ether to share the platform data with macb. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22macb: remove conditional clk handlingJamie Iles1-21/+2
AT91 now provides both "pclk" and "hclk" aliases for the the macb device so we can use the same clk handling paths for both AT91 and AVR32. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-16net/cadence: enable by default NET_ATMELJean-Christophe PLAGNIOL-VILLARD1-0/+1
so the defconfig of the atmel continue to have the support of the network as before Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-27Merge branch 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-armLinus Torvalds1-1/+1
* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-09-15MII: fix Kconfig dependencies for MIIJeff Kirsher1-0/+1
MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko2-2/+2
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12macb: Move the Atmel driverJeff Kirsher6-0/+3173
Move the Atmel driver into drivers/net/ethernet/cadence/ and make the necessary Kconfig and Makefile changes. CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.