aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cavium/thunder/thunder_bgx.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-31net: thunderx: add multicast filter management supportVadim Lomovtsev1-1/+9
The ThunderX NIC could be partitioned to up to 128 VFs and thus represented to system. Each VF is mapped to pair BGX:LMAC, and each of VF is configured by kernel individually. Eventually the bunch of VFs could be mapped onto same pair BGX:LMAC and thus could cause several multicast filtering configuration requests to LMAC with the same MAC addresses. This commit is to add ThunderX NIC BGX filtering manipulation routines. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31net: thunderx: move filter register related macro into proper placeVadim Lomovtsev1-11/+0
The ThunderX NIC has set of registers which allows to configure filter policy for ingress packets. There are three possible regimes of filtering multicasts, broadcasts and unicasts: accept all, reject all and accept filter allowed only. Current implementation has enum with all of them and two generic macro for enabling filtering et all (CAM_ACCEPT) and enabling/disabling broadcast packets, which also should be corrected in order to represent register bits properly. All these values are private for driver and there is no need to ‘publish’ them via header file. This commit is to move filtering register manipulation values from header file into source with explicit assignment of exact register values to them to be used while register configuring. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: thunderx: add timestamping supportSunil Goutham1-0/+4
This adds timestamping support for both receive and transmit paths. On the receive side no filters are supported i.e either all pkts will get a timestamp appended infront of the packet or none. On the transmit side HW doesn't support timestamp insertion but only generates a separate CQE with transmitted packet's timestamp. Also HW supports only one packet at a time for timestamping on the transmit side. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net: thunderx: Fix BGX transmit stall due to underflowSunil Goutham1-0/+2
For SGMII/RGMII/QSGMII interfaces when physical link goes down while traffic is high is resulting in underflow condition being set on that specific BGX's LMAC. Which assets a backpresure and VNIC stops transmitting packets. This is due to BGX being disabled in link status change callback while packet is in transit. This patch fixes this issue by not disabling BGX but instead just disables packet Rx and Tx. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: thunderx: Fix set_max_bgx_per_node for 81xx rgxGeorge Cherian1-0/+1
Add the PCI_SUBSYS_DEVID_81XX_RGX and use the same to set the max bgx per node count. This fixes the issue intoduced by following commit 78aacb6f6 net: thunderx: Fix invalid mac addresses for node1 interfaces With this commit the max_bgx_per_node for 81xx is set as 2 instead of 3 because of which num_vfs is always calculated as zero. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: thunderx: Fix invalid mac addresses for node1 interfacesSunil Goutham1-1/+0
When booted with ACPI, random mac addresses are being assigned to node1 interfaces due to mismatch of bgx_id in BGX driver and ACPI tables. This patch fixes this issue by setting maximum BGX devices per node based on platform/soc instead of a macro. This change will set the bgx_id appropriately. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: thunderx: Fix PHY autoneg for SGMII QLM modeThanneeru Srinivasulu1-0/+5
This patch fixes the case where there is no phydev attached to a LMAC in DT due to non-existance of a PHY driver or due to usage of non-stanadard PHY which doesn't support autoneg. Changes dependeds on firmware to send correct info w.r.t PHY and autoneg capability. This patch also covers a case where a 10G/40G interface is used as a 1G with convertors with Cortina PHY in between. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: thunderx: Pause frame supportSunil Goutham1-0/+12
Enable pause frames on both Rx and Tx side, configure pause interval e.t.c. Also support for enable/disable pause frames on Rx/Tx via ethtool has been added. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: thunderx: Introduce BGX_ID_MASK macro to extract bgx_idRadha Mohan Chintakuntla1-0/+2
This patch fixes the 'bgx_id' determination on 83xx where there are 4 BGX blocks instead of 2 on other platforms. Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Support for 83xx mixed QLM/DLM configSunil Goutham1-1/+2
83xx has 4 BGX blocks and are enabled mixed QLM/DLM configs. BGX0/BGX1 are from QLM2/QLM3, BGX3 is DLM4 and BGX2 is split across DLM5 & DLM6. This patch adds support for BGX2's split config and also enables all 4 BGXs to be used. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add support for 16 LMACs of 83xxSunil Goutham1-2/+0
83xx will have 4 BGX blocks i.e 16 LMACs, to avoid changing the same with every platform, nicpf struct elements which track LMAC related info are now allocated runtime based on platform's max possible BGX count. Also fixed configuring min packet size for all LMAC's supported on a platform. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add RGMII interface type supportSunil Goutham1-1/+5
This patch adds RGX/RGMII interface type support to BGX driver. This type of interface is supported by 81xx SOC. CN81XX VNIC has 8 VFs and max possible LMAC interfaces are 9, hence RGMII interface will not work if all DLMs are in BGX mode and all 8 LMACs are enabled Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add QSGMII interface type supportSunil Goutham1-0/+1
This patch adds support for QSGMII interface type to the BGX driver. This type of interface is supported by 81xx SOC. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add 81xx support to BGX driverSunil Goutham1-0/+11
This patch adds support for BGX module on 81xx where a BGX can be split and have different LMACs configured in different modes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Support for different LMAC types within BGXSunil Goutham1-10/+0
On 88xx all LMACs in a BGX will be in same mode but on 81xx BGX can be split as two and there can be LMACs configured in different modes. These changes move lmac_type, lane2serdes fields into per lmac struct from BGX struct. Got rid of qlm_mode field which has become redundant with these changes. And now no of valid LMACs is read from CSRs configured by low level firmware and figuring out the same based on QLM mode is discarded Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add support for 81xx and 83xx chipsSunil Goutham1-0/+2
This patch adds info on HW maximums of 81xx/83xx and also configures receive and transmit datapaths accordingly. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: thunderx: Fix link status reportingSunil Goutham1-0/+2
Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Tao Wang <tao.wang@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Enable BGX LMAC's RX/TX only after VF is upSunil Goutham1-0/+1
Enable or disable BGX LMAC's RX/TX based on corresponding VF's status. If otherwise, when multiple LMAC's physical link is up then packets from all LMAC's whose corresponding VF is not yet initialized will get forwarded to VF0. This is due to VNIC's default configuration where CPI, RSSI e.t.c point to VF0/QSET0/RQ0. This patch will prevent multiple copies of packets on VF0. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Force to load octeon-mdio before bgx driver.Thanneeru Srinivasulu1-0/+1
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30net: thunderx: Support for internal loopback modeSunil Goutham1-0/+4
Support for setting VF's corresponding BGX LMAC in internal loopback mode. This mode can be used for verifying basic HW functionality such as packet I/O, RX checksum validation, CQ/RBDR interrupts, stats e.t.c. Useful when DUT has no external network connectivity. 'loopback' mode can be enabled or disabled via ethtool. Note: This feature is not supported when no of VFs enabled are morethan no of physical interfaces i.e active BGX LMACs Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02net: thunderx: rework mac address handlingAleksey Makarov1-2/+2
This fixes sparse message: drivers/net/ethernet/cavium/thunder/nicvf_main.c:385:40: sparse: cast to restricted __le64 Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02net: thunderx: Cleanup duplicate NODE_ID macros, add nic_get_node_id()Robert Richter1-3/+0
There are duplicate NODE_ID macro definitions. Move all of them to nic.h for usage in nic and bgx driver and introduce nic_get_node_id() helper function. This patch also fixes 64bit mask which should have been ULL by reworking the node calculation. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-27net: Adding support for Cavium ThunderX network controllerSunil Goutham1-0/+223
This patch adds support for the Cavium ThunderX network controller. The driver is on the pci bus and thus requires the Thunder PCIe host controller driver to be enabled. Signed-off-by: Maciej Czekaj <mjc@semihalf.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Kamil Rytarowski <kamil@semihalf.com> Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sruthi Vangala <svangala@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.