aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/chelsio/cxgb4/sge.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-14cxgb4: add per rx-queue counter for packet errorsGanesh Goudar1-0/+4
print per rx-queue packet errors in sge_qinfo Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11cxgb4: specify IQTYPE in fw_iq_cmdArjun Vynipadath1-1/+3
congestion argument passed to t4_sge_alloc_rxq() is used to differentiate between nic/ofld queues. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29cxgb4: Add support for FW_ETH_TX_PKT_VM_WRArjun Vynipadath1-2/+370
The present TX workrequest(FW_ETH_TX_PKT_WR) cant be used for host->vf communication, since it doesn't loopback the outgoing packets to virtual interfaces on the same port. This can be done using FW_ETH_TX_PKT_VM_WR. This fix depends on ethtool_flags to determine what WR to use for TX path. Support for setting this flags by user is added in next commit. Based on the original work by : Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc_node() -> kcalloc_node()Kees Cook1-1/+1
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04net: chelsio: Use zeroing memory allocator instead of allocator/memsetYueHaibing1-2/+1
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21cxgb4: copy the length of cpl_tx_pkt_core to fw_wrGanesh Goudar1-15/+14
immdlen field of FW_ETH_TX_PKT_WR is filled in a wrong way, we must copy the length of all the cpls encapsulated in fw work request. In the xmit path we missed adding the length of CPL_TX_PKT_CORE but we added the length of WR_HDR and it worked because WR_HDR and CPL_TX_PKT_CORE are of same length. Add the length of cpl_tx_pkt_core not WR_HDR's. This also fixes the lso cpl errors for udp tunnels Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: enable inner header checksum calculationGanesh Goudar1-21/+70
set cntrl bits to indicate whether inner header checksum needs to be calculated whenever the packet is an encapsulated packet and enable supported encap features. Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31cxgb4: LLD driver changes to support TLSAtul Gupta1-6/+101
Read the Inline TLS capability from firmware. Determine the area reserved for storing the keys Dump the Inline TLS tx and rx records count. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Reviewed-by: Michael Werner <werner@chelsio.com> Reviewed-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-37/+184
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-22cxgb4: add geneve offload support for T6Ganesh Goudar1-0/+3
Add geneve segmentation offload support of T6 cards. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: add support for vxlan segmentation offloadGanesh Goudar1-37/+181
add changes to t4_eth_xmit to enable vxlan segmentation offload support. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29cxgb4: Add support for Inline IPSec TxAtul Gupta1-51/+51
Added Tx routine for ULD - define interface for ULD Tx. Export routines used for Tx data - Routines common for data transmit are used by cxgb4 and chcr drivers. - EXPORT routines enable transmit from chcr driver. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-6/+6
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-14Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+7
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-03crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driverHarsh Jain1-1/+7
Allow chcr to do DMA mapping/Unmapping instead of lld cxgb4. It moves "Copy AAD to dst buffer" requirement from driver to firmware. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-28drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()Kees Cook1-6/+6
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Ganesh Goudar <ganeshgr@chelsio.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()Mark Rutland1-2/+2
Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-14net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flagCasey Leedom1-2/+3
cxgb4 Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set. Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability Device Control[Relaxed Ordering Enable] at probe routine, to make sure the driver will not send the Relaxed Ordering TLPs to the Root Complex which could not deal the Relaxed Ordering TLPs. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-05cxgb4: time stamping interface for PTPAtul Gupta1-6/+167
Supports hardware and software time stamping via the Linux SO_TIMESTAMPING socket option. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03cxgb4: get rid of custom busy poll codeEric Dumazet1-39/+0
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot of code, we also remove one spin_lock() from driver fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03cxgb4: Fix uld_send() for ctrl pktsArjun V1-3/+8
Without any uld being loaded, uld_txq_info[] will be NULL. uld_send() is also used for sending control work requests(for eg: setting filter) that dont require any ulds to be loaded. Hence move uld_txq_info[] assignment after ctrl_xmit(). Also added a NULL check for uld_txq_info[]. Fixes: 94cdb8bb993a (cxgb4: Add support for dynamic allocation of resources for ULD). Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04cxgb4: Support compressed error vector for T6Arjun V1-2/+14
t6fw-1.15.15.0 enabled compressed error vector in cpl_rx_pkt for T6. Updating driver to take care of these changes. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18cxgb4: Allocate Tx queues dynamicallyHariprasad Shenai1-34/+87
Allocate resources dynamically for Upper layer driver's (ULD) like cxgbit, iw_cxgb4, cxgb4i and chcr. The resources allocated include Tx queues which are allocated when ULD register with cxgb4 driver and freed while un-registering. The Tx queues which are shared by ULD shall be allocated by first registering driver and un-allocated by last unregistering driver. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16cxgb4: do not call napi_hash_del()Eric Dumazet1-1/+0
Calling napi_hash_del() before netif_napi_del() is dangerous if a synchronize_rcu() is not enforced before NAPI struct freeing. Lets leave this detail to core networking stack and feel more comfortable. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hariprasad S <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD'sHariprasad Shenai1-6/+12
Allocate resources dynamically to cxgb4's Upper layer driver's(ULD) like cxgbit, iw_cxgb4 and cxgb4i. Allocate resources when they register with cxgb4 driver and free them while unregistering. All the queues and the interrupts for them will be allocated during ULD probe only and freed during remove. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18cxgb4: Add support for dynamic allocation of resources for ULDHariprasad Shenai1-2/+2
Add a new commmon infrastructure to allocate reosurces dynamically to Upper layer driver's(ULD) when they register with cxgb4 driver and free them during unregistering. All the queues and the interrupts for them will be allocated during ULD probe only and freed during remove. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30cxgb4/cxgb4vf: Fixes regression in perf when tx vlan offload is disabledHariprasad Shenai1-1/+1
The commit 637d3e997351 ("cxgb4: Discard the packet if the length is greater than mtu") introduced a regression in the VLAN interface performance when Tx VLAN offload is disabled. Check if skb is tagged, regardless of whether it is hardware accelerated or not. Presently we were checking only for hardware acclereated one, which caused performance to drop to ~0.17Mbps on a 10GbE adapter for VLAN interface, when tx vlan offload is turned off using ethtool. The ethernet head length calculation was going wrong in this case, and driver ended up dropping packets. Fixes: 637d3e997351 ("cxgb4: Discard the packet if the length is greater than mtu") Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26cxgb4: Avoids race and deadlock while freeing tx descriptorHariprasad Shenai1-0/+2
There could be race between t4_eth_xmit() and t4_free_sge_resources() while freeing tx descriptors, take txq lock in t4_free_sge_resources(). We need to stop the xmit frame path which runs in bottom half context while unloading the driver using _bh variant of the lock. This is to prevent the deadlock between xmit and driver unload. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11cxgb4: Stop Rx Queues before freeing it upHariprasad Shenai1-3/+17
Stop all Ethernet RX Queues before freeing up various Ingress/Egress Queues, etc. We were seeing cases of Ingress Queues not getting serviced during the shutdown process leading to Ingress Paths jamming up through the chip and blocking the shutdown effort itself. One such case involved the Firmware sending a "Flush Token" through the ULP-TX -> ULP-RX path for an Ethernet TX Queue being freed in order to make sure there weren't any remaining TX Work Requests in the pipeline. But the return path was stalled by Ingress Data unable to be delivered to the Host because those Ingress Queues were no longer being serviced. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23Merge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds1-2/+11
Pull more SCSI target updates from Nicholas Bellinger: "This series contains cxgb4 driver prerequisites for supporting iscsi segmentation offload (ISO), that will be utilized for a number of future v4.7 developments in iscsi-target for supporting generic hw offloads" * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: cxgb4: update Kconfig and Makefile cxgb4: add iSCSI DDP page pod manager cxgb4, iw_cxgb4: move delayed ack macro definitions cxgb4: move VLAN_NONE macro definition cxgb4: update struct cxgb4_lld_info definition cxgb4: add definitions for iSCSI target ULD cxgb4, cxgb4i: move struct cpl_rx_data_ddp definition cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitions cxgb4, iw_cxgb4: move definitions to common header file cxgb4: large receive offload support cxgb4: allocate resources for CXGB4_ULD_ISCSIT cxgb4: add new ULD type CXGB4_ULD_ISCSIT
2016-03-22cxgb4: large receive offload supportVarun Prakash1-2/+10
add large receive offload(LRO) support for upper layer drivers. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4: allocate resources for CXGB4_ULD_ISCSITVarun Prakash1-0/+1
allocate rxqs for non T4 adapters, dump rxqs sge qinfo through debugfs. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-02cxgb4/cxgb4vf: For T6 adapter, set FBMIN to 64 bytesHariprasad Shenai1-1/+11
T4 and T5 hardware will not coalesce Free List PCI-E Fetch Requests if the Host Driver provides more Free List Pointers than the Fetch Burst Minimum value. So if we set FBMIN to 64 bytes and the Host Driver supplies 128 bytes of Free List Pointer data, the hardware will issue two 64-byte PCI-E Fetch Requests rather than a single coallesced 128-byte Fetch Request. T6 fixes this. So, for T4/T5 we set the FBMIN value to 128 Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02cxgb4/cxgb4vf: Use fl capacity to check if fl needs to be replenishedHariprasad Shenai1-1/+1
Use freelist capacity instead of freelist size while checking, if freelist needs to be refilled Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23cxgb4: Update SGE context congestion map change for T6 adapterHariprasad Shenai1-3/+4
SGE context congestion map changed from 4 to 8 priority per port in T6 as there are only 2 channels. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23cxgb4: Update register range and SGE registers for T6 adapterHariprasad Shenai1-2/+13
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23cxgb4/cxgb4vf: Update Ingress padding boundary values for T6 adapterHariprasad Shenai1-31/+2
Ingress padding boundary values got changed for T6. T5: 0=32B 1=64B 2=128B 3=256B 4=512B 5=1024B 6=2048B 7=4096B T6: 0=8B 1=16B 2=32B 3=64B 4=128B 5=128B 6=256B 7=512B Updating the driver to set the correct boundary values in SGE_CONTROL to 32B. Also, need to take care of this fl alignment change when calculating the next packet offset. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23cxgb4: Use napi_complete_done() api in napi handlerHariprasad Shenai1-1/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23cxgb4: Use the node info to alloc_ring() for RX queuesHariprasad Shenai1-2/+4
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23cxgb4: get naming correct for iscsi queuesHariprasad Shenai1-1/+1
All the upper level protocols like rdma, iscsi have their own offload rx queues, so instead of using the generic naming convention be specific while naming them. Improves code readability Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08cxgb4: Add FL DMA mapping error and low counterHariprasad Shenai1-0/+3
Add Free List DMA Mapping Errors to SGE Queue info for Free Lists. Add Free List "Low" counter to count the number of times we see the number of pointers that we _think_ the hardware sees in the Free List below the Egress Threshold. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08cxgb4: Deal with wrap-around of queue for Work requestHariprasad Shenai1-4/+53
The WR headers may not fit within one descriptor. So we need to deal with wrap-around here. Based on original patch by Pranjal Joshi <pjoshi@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08cxgb4: prevent simultaneous execution of service_ofldq()Hariprasad Shenai1-6/+50
Change mutual exclusion mechanism to prevent multiple threads of execution from running in service_ofldq() at the same time. The old mechanism used an implicit guard on the down-call path and none on the restart path and wasn't working. This checking makes the mechanism explicit and is much easier to understand as a result. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08cxgb4: Use ACCES_ONCE macro to read queue's consumer indexHariprasad Shenai1-2/+2
Use helper macro ACCESS_ONCE() to load from the SGE status page to prevent the compiler loading multiple times. Based on original work by Mike Werner <werner@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18net: provide generic busy polling to all NAPI driversEric Dumazet1-1/+0
NAPI drivers no longer need to observe a particular protocol to benefit from busy polling (CONFIG_NET_RX_BUSY_POLL=y) napi_hash_add() and napi_hash_del() are automatically called from core networking stack, respectively from netif_napi_add() and netif_napi_del() This patch depends on free_netdev() and netif_napi_del() being called from process context, which seems to be the norm. Drivers might still prefer to call napi_hash_del() on their own, since they might combine all the rcu grace periods into a single one, knowing their NAPI structures lifetime, while core networking stack has no idea of a possible combining. Once this patch proves to not bring serious regressions, we will cleanup drivers to either remove napi_hash_del() or provide appropriate rcu grace periods combining. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18net: move skb_mark_napi_id() into core networking stackEric Dumazet1-1/+0
We would like to automatically provide busy polling support to all NAPI drivers, without them having to implement anything. skb_mark_napi_id() can be called from napi_gro_receive() and napi_get_frags(). Few drivers are still calling skb_mark_napi_id() because they use netif_receive_skb(). They should eventually call napi_gro_receive() instead. I will leave this to drivers maintainers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28cxgb4: Add HW timesptamp support for RXHariprasad Shenai1-3/+33
Adds support for ethtool get time stamp ioctl, which is used by tcpdump to get the supported time stamp types eg: tcpdump -i eth5 -J Time stamp types for eth5 (use option -j to set): host (Host) adapter_unsynced (Adapter, not synced with system time) Adds support for adapter unsynced mode, by adding SIOCSHWTSTAMP support in driver. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09cxgb4: Fix tx flit calculationHariprasad Shenai1-1/+1
In commit 0aac3f56d4a63f04 ("cxgb4: Add comment for calculate tx flits and sge length code") introduced a regression where tx flit calculation is going wrong, which can lead to data corruption, hang, stall and write-combining failure. Fixing it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12cxgb4: Add debugfs support to dump tid infoHariprasad Shenai1-5/+4
Add debugfs support to dump tid info like stid, sftid, tids, atid and hwtids Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.