aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/emulex/benet/be_main.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2011-08-24be2net: Fix race in posting rx buffers.Sathya Perla1-1/+1
There is a possibility of be_post_rx_frags() being called simultaneously from both be_worker() (when rx_post_starved) and be_poll_rx() (when rxq->used is 0). This can be avoided by posting rx buffers only when some completions have been reaped. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24rps: support IPIP encapsulationEric Dumazet1-0/+2
Skip IPIP header to get proper layer-4 information. Like GRE tunnels, this only works if rxhash is not already provided by the device itself (ethtool -K ethX rxhash off), to allow kernel compute a software rxhash. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22net: add APIs for manipulating skb page fragments.Ian Campbell1-2/+168
The primary aim is to add skb_frag_(ref|unref) in order to remove the use of bare get/put_page on SKB pages fragments and to isolate users from subsequent changes to the skb_frag_t data structure. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22net: vlan: goto another_round instead of calling __netif_receive_skbJiri Pirko1-4/+3
Now, when vlan tag on untagged in non-accelerated path is stripped from skb, headers are reset right away. Benefit from that and avoid calling __netif_receive_skb recursivelly and just use another_round. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22net/wan/hdlc_ppp: use break in switchJesper Juhl1-7/+7
We'll either hit one of the case labels or the default in the switch and in all cases do we then 'goto out' and we also have a 'goto out' after the switch that is redundant. Change to just use break in the case statements and leave the 'goto out' after the lop for everyone to hit. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22batman-adv: merge update_transtable() into tt related codeMarek Lindner3-74/+70
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22batman-adv: reuse tt_len() to calculate tt buffer lengthMarek Lindner1-2/+1
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2011-08-22batman-adv: print client flags in the local/global transtables outputAntonio Quartulli1-10/+27
Since clients can have several flags on or off, this patches make them appear in the local/global transtable output so that they can be checked for debugging purposes. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22batman-adv: implement AP-isolation on the sender sideAntonio Quartulli5-12/+29
If a node has to send a packet issued by a WIFI client to another WIFI client, the packet is dropped. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22batman-adv: implement AP-isolation on the receiver sideAntonio Quartulli6-0/+58
When a node receives a unicast packet it checks if the source and the destination client can communicate or not due to the AP isolation Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22batman-adv: detect clients connected through a 802.11 deviceAntonio Quartulli9-11/+55
Clients connected through a 802.11 device are now marked with the TT_CLIENT_WIFI flag. This flag is also advertised with the tt announcement. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22batman-adv: correct several typ0s in the commentsAntonio Quartulli12-37/+36
Several typos have been corrected and some sentences have been rephrased Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22batman-adv: hash_add() has to discriminate on the return valueAntonio Quartulli3-9/+22
hash_add() returns 0 on success while returns -1 either on error and on entry already present. The caller could use such information to select its behaviour. For this reason it is useful that hash_add() returns -1 in case on error and returns 1 in case of entry already present. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-20net: Preserve ooo_okay when copying skb headerChangli Gao1-0/+1
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20dm9000: define debug level as a module parameterVladimir Zapolskiy2-11/+8
This change allows to get driver specific debug messages output providing a module parameter. As far as the maximum level of verbosity is too high, it is demoted by default. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Update version to 3.120Matt Carlson1-2/+2
This patch updates the tg3 version to 3.120. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Add external loopback support to selftestMatt Carlson2-10/+90
This patch adds external loopback support to tg3's ethtool selftest. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Restructure tg3_test_loopbackMatt Carlson1-40/+40
The tg3_test_loopback() function is starting to get more complicated as more loopback tests are added. This patch cleans up the code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Pull phy int lpbk setup into separate funcMatt Carlson1-59/+90
This patch pulls out the internal phy loopback setup code into a separate function. This cleans up the loopback test code and makes it available for NETIF_F_LOOPBACK support later. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Consilidate MAC loopback codeMatt Carlson1-40/+51
The driver puts the device into MAC loopback in two places in the driver. This patch consolidates the code into a single routine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Remove dead codeMatt Carlson1-34/+1
Now that CPMU devices don't do MAC loopback, all the CPMU power saving mode adjustments are unneeded. This patch removes the dead code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20qlge: Adding Maintainer.Jitendra Kalsaria1-0/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-19net: add the comment for skb->l4_rxhashChangli Gao1-0/+2
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-19ixgbe: Cleanup FCOE and VLAN handling in xmit_frame_ringAlexander Duyck2-51/+73
This change is meant to further cleanup the transmit path by streamlining some of the VLAN and FCOE/DCB tasks in the transmit path. In addition it adds code for support software VLANs in the event that they are used in conjunction with DCB and/or FCOE. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-19ixgbe: replace reference to CONFIG_FCOE with IXGBE_FCOEAlexander Duyck2-2/+2
CONFIG_FCOE is not the correct define to check since it is possible for it to be CONFIG_FCOE_MODULE, as such the reference to it should be replaced with IXGBE_FCOE. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-19ixgbe: Refactor transmit map and cleanup routinesAlexander Duyck2-216/+247
This patch implements a partial refactor of the TX map/queue and cleanup routines. It merges the map and queue functionality and as a result improves the transmit performance by avoiding unnecessary reads from memory. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-19ixgbe - DDP last user buffer - error to warnAmir Hanania1-4/+6
Change the error message in the last DDP user buffer to warn_once Signed-off-by: Amir Hanania <amir.hanania@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-19ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONSDaniel Baluta1-4/+5
IPV6_2292PKTOPTIONS is broken for 32-bit applications running in COMPAT mode on 64-bit kernels. The same problem was fixed for IPv4 with the patch: ipv4: Fix ip_getsockopt for IP_PKTOPTIONS, commit dd23198e58cd35259dd09e8892bbdb90f1d57748 Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-19e1000e: bump driver version numberBruce Allan1-1/+1
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-19e1000e: convert driver to use extended descriptorsBruce Allan3-89/+120
Some features currently not supported by the driver (e.g. RSS) require the use of extended descriptors, but the driver is setup to only use legacy descriptors in all modes except for when jumbo frames are enabled on some parts. Convert the driver to always use extended descriptors in order to enable the forthcoming support of these other features. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-18net: rps: support PPPOE session messagesChangli Gao1-0/+8
Inspect the payload of PPPOE session messages for the 4 tuples to generate skb->rxhash. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: rps: support 802.1QChangli Gao1-0/+8
For the 802.1Q packets, if the NIC doesn't support hw-accel-vlan-rx, RPS won't inspect the internal 4 tuples to generate skb->rxhash, so this kind of traffic can't get any benefit from RPS. This patch adds the support for 802.1Q to RPS. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18be2net: Storing the 'vid' got by the grp5 event instead of storing the vlan_tagSomnath Kotur2-3/+2
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18bnx2x: downgrade Max BW error message to debugMichal Schmidt1-2/+2
There are valid configurations where Max BW is configured to zero for some VNs. Print the message only if debugging is enabled and do not call the configuration "illegal". [v2: use DP(), not BNX2X_DBG_ERR(); recommended by Eilon Greenstein.] Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: fix IBM EMAC driver after rename.Tony Breeds33-129/+150
In commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC* The conversion was incomplete so that even if the driver was added to the .config it wasn't built, but there were no errors). In this commit we also update the various defconfigs that use EMAC to use the new Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard. We do not explicitly select the Kconfig dependencies, as this would force EMAC on. Doing it in the defconfig allows more flexibility. Tested on a canyondlands board. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18NET: Korina: Don't include <asm/segment.h>Ralf Baechle1-1/+0
Korina.c is a MIPS-specific SOC driver and <asm/segment> is empty on MIPS since 2.1.7 ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18MAINTAINERS: qlcnicAnirban Chakraborty1-1/+1
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: netdev-features.txt update to Documentation/networking/00-INDEXWillem de Bruijn1-1/+1
Update netdev-features.txt entry in 00-INDEX to incorporate feedback by Michał Mirosław. v2: restored tabs that were inadvertently changed to spaces in v1. sorry for the error. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18vlan: reset headers on accel emulation pathJiri Pirko1-0/+2
It's after all necessary to do reset headers here. The reason is we cannot depend that it gets reseted in __netif_receive_skb once skb is reinjected. For incoming vlanids without vlan_dev, vlan_do_receive() returns false with skb != NULL and __netif_reveive_skb continues, skb is not reinjected. This might be good material for 3.0-stable as well Reported-by: Mike Auty <mike.auty@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18MAINTAINERS: change netxen_nic maintainersAmit Kumar Salecha1-1/+2
I will no longer maintain netxen_nic driver. Sony Chacko and Rajesh Borundia are taking over. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17forcedeth: call vlan_mode only if hw supports vlansJiri Pirko1-1/+2
If hw does not support vlans, dont call nv_vlan_mode because it has no point. I believe that this should fix issues on older non-vlan supportive chips (like Ingo has). Reported-ty: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Add flexcan device support for p1010rdb.holt@sgi.com1-0/+2
Allow the p1010 processor to select the flexcan network driver. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>, Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Prefer device tree clock frequency if available.holt@sgi.com2-9/+27
If our CAN device's device tree node has a clock-frequency property, then use that value for the can devices clock frequency. If not, fall back to asking the platform/mach code for the clock frequency associated with the flexcan device. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Add of_match to platform_device definition.holt@sgi.com1-1/+12
On powerpc, the OpenFirmware devices are not matched without specifying an of_match array. Introduce that array as that is used for matching on the Freescale P1010 processor. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Fix up fsl-flexcan device tree binding.holt@sgi.com3-64/+17
This patch cleans up the documentation of the device-tree binding for the Flexcan devices on Freescale's PowerPC and ARM cores. Extra properties are not used by the driver so we are removing them. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>, Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Abstract off read/write for big/little endian.holt@sgi.com1-57/+83
Make flexcan driver handle register reads in the appropriate endianess. This was a basic search and replace and then define some inlines. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Remove #include <mach/clock.h>holt@sgi.com1-2/+0
powerpc does not have a mach-####/clock.h. When testing, I found neither arm nor powerpc needed the mach/clock.h at all so I removed it. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove ndo_set_multicast_list callbackJiri Pirko5-13/+7
Remove no longer used operation. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko251-271/+258
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: introduce IFF_UNICAST_FLT private flagJiri Pirko17-12/+51
Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.