aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-18dpaa_eth: remove obsolete commentMadalin Bucur1-4/+0
Comment is no longer valid for a long time now. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18dpaa_eth: cleanup dpaa_eth_probe() error pathsMadalin Bucur1-33/+20
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18dpaa_eth: change device usedMadalin Bucur1-30/+12
Change device used for DMA mapping to the MAC device that is an of_device, with proper DMA ops. Using this device for the netdevice should also address the issue with DSA scenarios that need the netdevice to be backed by an of_device. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18dpaa_eth: move of_phy_connect() to the eth driverMadalin Bucur1-5/+43
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28dpaa_eth: check allocation resultMadalin Bucur1-0/+3
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28dpaa_eth: add NETIF_F_RXHASHMadalin Bucur1-3/+20
Set the skb hash when then FMan Keygen hash result is available. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28dpaa_eth: use multiple Rx frame queuesMadalin Bucur1-7/+43
Add a block of 128 Rx frame queues per port. The FMan hardware will send traffic on one of these queues based on the FMan port Parse Classify Distribute setup. The hash computed by the FMan Keygen block will select the Rx FQ. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13net: dpaa_eth: constify platform_device_idArvind Yadav1-1/+1
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: get rid of struct tc_to_netdevJiri Pirko1-3/+4
Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: change return value of ndo_setup_tc for driver supporting mqprio onlyJiri Pirko1-1/+1
Change the return value from -EINVAL to -EOPNOTSUPP. The rest of the drivers have it like that, so be aligned. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: push cls related args into cls_common structureJiri Pirko1-1/+0
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: make type an argument for ndo_setup_tcJiri Pirko1-3/+4
Since the type is always present, push it to be a separate argument to ndo_setup_tc. On the way, name the type enum and use it for arg type. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: Convert to using %pOF instead of full_nameRob Herring1-2/+2
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Two entries being added at the same time to the IFLA policy table, whilst parallel bug fixes to decnet routing dst handling overlapping with the dst gc removal in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20dpaa_eth: reuse the dma_ops provided by the FMan MAC deviceMadalin Bucur1-1/+1
Remove the use of arch_setup_dma_ops() that was not exported and was breaking loadable module compilation. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: propagate tc filter chain index down the ndo_setup_tc callJiri Pirko1-2/+2
We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-01dpaa_eth: use AVOIDBLOCK for Tx confirmation queuesMadalin Bucur1-1/+1
The AVOIDBLOCK flag determines the Tx confirmation queues processing to be redirected to any available CPU when the current one is slow in processing them. This may result in a higher Tx confirmation interrupt count but may reduce pressure on a certain CPU that with the previous setting would process all Tx confirmation frames. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15mqprio: Modify mqprio to pass user parameters via ndo_setup_tc.Amritha Nambiar1-6/+10
The configurable priority to traffic class mapping and the user specified queue ranges are used to configure the traffic class, overriding the hardware defaults when the 'hw' option is set to 0. However, when the 'hw' option is non-zero, the hardware QOS defaults are used. This patch makes it so that we can pass the data the user provided to ndo_setup_tc. This allows us to pull in the queue configuration if the user requested it as well as any additional hardware offload type requested by using a value other than 1 for the hw value. Finally it also provides a means for the device driver to return the level supported for the offload type via the qopt->hw value. Previously we were just always assuming the value to be 1, in the future values beyond just 1 may be supported. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09dpaa_eth: enable context-A stashingMadalin Bucur1-1/+2
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2017-03-09dpaa_eth: enable multiple Tx traffic classesCamelia Groza1-0/+36
Implement the setup_tc ndo to configure prioritised Tx traffic classes. Priorities range from 0 (lowest) to 3 (highest). The driver assigns NR_CPUS queues to each traffic class. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2017-03-09dpaa_eth: add four prioritised Tx traffic classesCamelia Groza1-8/+35
Each traffic class corresponds to a WQ priority level. The number of Tx netdev queues and frame queues is increased to NR_CPUS queues for each traffic class. In addition, the priority of the Rx, Error and Conf queues is lowered but their order is maintained. By default, only one traffic class is enabled, only the low priority Tx queues are used and only the corresponding netdev queues are advertised. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2017-03-09dpaa_eth: do not ignore port api return valueMadalin Bucur1-22/+43
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2017-03-09dpaa_eth: enable Rx checksum offloadMadalin Bucur1-2/+27
Use the FMan HW parser L4CV flag to offload Rx checksumming. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2017-03-09dpaa_eth: remove redundant initializationMadalin Bucur1-1/+1
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2017-02-20dpaa_eth: implement ioctl() for PHY-related opsMichael Walle1-0/+8
This commit adds the ndo_do_ioctl() callback which allows the userspace to access PHY registers, for example. This will make mii-diag and similar tools work. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2017-02-17dpaa_eth: small leak on errorDan Carpenter1-1/+1
This should be >= instead of > here. It means that we don't increment the free count enough so it becomes off by one. Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-1/+1
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger1-4/+2
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: Initialize CGR structure before initRoy Pledge1-0/+2
The QBMan CGR options needs to be zeroed before calling the init function Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: cleanup after init_phy() failureMadalin Bucur1-1/+3
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17dpaa_eth: use big endian accessorsClaudiu Manoil1-34/+37
Ensure correct access to the big endian QMan HW through proper accessors. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add trace pointsMadalin Bucur1-0/+15
Add trace points on the hot processing path. Signed-off-by: Ruxandra Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add sysfs exportsMadalin Bucur1-0/+4
Export Frame Queue and Buffer Pool IDs through sysfs. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add ethtool statisticsMadalin Bucur1-2/+52
Add a series of counters to be exported through ethtool: - add detailed counters for reception errors; - add detailed counters for QMan enqueue reject events; - count the number of fragmented skbs received from the stack; - count all frames received on the Tx confirmation path; - add congestion group statistics; - count the number of interrupts for each CPU. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add ethtool functionalityMadalin Bucur1-0/+2
Add support for basic ethtool operations. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add support for DPAA EthernetMadalin Bucur1-0/+2682
This introduces the Freescale Data Path Acceleration Architecture (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan, BMan, PAMU and FMan drivers to deliver Ethernet connectivity on the Freescale DPAA QorIQ platforms. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.