aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/freescale/fec.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-06-12net: fec: Add Scatter/gather supportNimrod Andy1-1/+1
Add Scatter/gather support for FEC. This feature allows to improve outbound throughput performance. Tested on imx6dl sabresd board: Running iperf tests shows a 55.4% improvement. $ ethtool -K eth0 sg off $ iperf -c 10.192.242.167 -t 3 & [ 3] local 10.192.242.108 port 52618 connected with 10.192.242.167 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 3.0 sec 99.5 MBytes 278 Mbits/sec $ ethtool -K eth0 sg on $ iperf -c 10.192.242.167 -t 3 & [ 3] local 10.192.242.108 port 52617 connected with 10.192.242.167 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 3.0 sec 154 MBytes 432 Mbits/sec CC: Li Frank <B20596@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12net: fec: Increase buffer descriptor entry numberNimrod Andy1-2/+2
In order to support SG, software TSO, let's increase BD entry number. CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12net: fec: Factorize the .xmit transmit functionNimrod Andy1-0/+1
Make the code more readable and easy to support other features like SG, TSO, moving the common transmit function to one api. And the patch also factorize the getting BD index to it own function. CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21fec: Implement the SIOCGHWTSTAMP ioctlBen Hutchings1-1/+2
This is untested. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-04net: fec: fix the error to get the previous BD entryDuan Fugang-B386111-0/+3
Bug: error to get the previous BD entry. When the current BD is the first BD, the previous BD entry must be the last BD, not "bdp - 1" in current logic. V4: * Optimize fec_enet_get_nextdesc() for code clean. Replace "ex_new_bd - ring_size" with "ex_base". Replace "new_bd - ring_size" with "base". V3: * Restore the API name because David suggest to use fec_enet_ prefix for all function in fec driver. So, change next_bd() -> fec_enet_get_nextdesc() change pre_bd() -> fec_enet_get_prevdesc() * Reduce the two APIs parameters for easy to call. V2: * Add tx_ring_size and rx_ring_size to struct fec_enet_private. * Replace api fec_enet_get_nextdesc() with next_bd(). Replace api fec_enet_get_prevdesc() with pre_bd(). * Move all ring size check logic to next_bd() and pre_bd(), which simplifies the code redundancy. V1: * Add BD ring size check to get the previous BD entry in correctly. Reviewed-by: Li Frank <B20596@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Frank Li <frank.li@freescale.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-27net: fec: workaround stop tx during errata ERR006358Frank Li1-0/+1
If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously detected as not set during a prior frame transmission, then the ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in frames not being transmitted until there is a 0-to-1 transition on ENET_TDAR[TDAR]. Workarounds: code can use the transmit frame interrupt flag (ENET_EIR[TXF]) as a method to detect whether the ENET has completed transmission and the ENET_TDAR[TDAR] has been cleared. If ENET_TDAR[TDAR] is detected as cleared when packets are queued and waiting for transmit, then a write to the TDAR bit will restart TxBD processing. This case main happen when loading is light. A ethernet package may not send out utile next package put into tx queue. How to test: while [ true ] do ping <IP> -s 10000 -w 4 ping <IP> -s 6000 -w 2 ping <IP> -s 4000 -w 2 ping <IP> -s 10000 -w 2 done You will see below result in overnight test. 6008 bytes from 10.192.242.116: seq=1 ttl=128 time=0.722 ms 4008 bytes from 10.192.242.116: seq=0 ttl=128 time=1001.008 ms 4008 bytes from 10.192.242.116: seq=1 ttl=128 time=1.010 ms 10008 bytes from 10.192.242.116: seq=0 ttl=128 time=0.896 ms After apply this patch, >1000ms delay disappear. Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: fec: Add VLAN receive HW support.Jim Baxter1-0/+3
This enables the driver to take advantage of the FEC VLAN indicator to improve performance. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26fec: Add support for reading RMON registersChris Healy1-0/+55
Add ethtool operation to read RMON registers. Tested against net-next on i.MX28. v2: make conditional on #ifndef CONFIG_M5272 Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07fec: Only pass pdev in fec_ptp_init()Fabio Estevam1-1/+1
Passing pdev in fec_ptp_init() is enough, since we can get ndev locally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27fec: Place the phy regulator in the private structureFabio Estevam1-0/+1
Instead of using a local reg_phy structure, let's put it inside the private structure, so that we are able to have access to the regulator structure even when we are outside fec_probe(). This is in preparation for controlling the FEC PHY regulator in the suspend and resume functions. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08net: fec: fix kernel oops when plug/unplug cable many timesFrank Li1-4/+6
reproduce steps 1. flood ping from other machine ping -f -s 41000 IP 2. run below script while [ 1 ]; do ethtool -s eth0 autoneg off; sleep 3;ethtool -s eth0 autoneg on; sleep 4; done; You can see oops in one hour. The reason is fec_restart clear BD but NAPI may use it. The solution is disable NAPI and stop xmit when reset BD. disable NAPI may sleep, so fec_restart can't be call in atomic context. Signed-off-by: Frank Li <Frank.Li@freescale.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-07Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+1
Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
2013-04-25net: fec: Enable imx6 enet checksum acceleration.Jim Baxter1-1/+9
Enables hardware generation of IP header and protocol specific checksums for transmitted packets. Enabled hardware discarding of received packets with invalid IP header or protocol specific checksums. The feature is enabled by default but can be enabled/disabled by ethtool. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-04net: freescale: fec: add support for optional enet_out clkWolfram Sang1-0/+1
Some MX28 boards need the internal enet_out clock to be enabled. So, do this in the driver iff the clock was referenced via devicetree. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: David S. Miller <davem@davemloft.net>
2013-03-15net: fec: restart the FEC when PHY speed changesLucas Stach1-0/+1
Proviously we would only restart the FEC when PHY link or duplex state changed. PHY does not always bring down the link for speed changes, in which case we would not detect any change and keep FEC running. Switching link speed without restarting the FEC results in the FEC being stuck in an indefinite state, generating error conditions for every packet. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-04net: fec: fix build error in no MXC platformFrank Li1-8/+7
build error cause by Commit ff43da86c69d76a726ffe7d1666148960dc1d108 ("NET: FEC: dynamtic check DMA desc buff type") drivers/net/ethernet/freescale/fec.c: In function ‘fec_enet_get_nextdesc’: drivers/net/ethernet/freescale/fec.c:215:18: error: invalid use of undefined type ‘struct bufdesc_ex’ drivers/net/ethernet/freescale/fec.c: In function ‘fec_enet_get_prevdesc’: drivers/net/ethernet/freescale/fec.c:224:18: error: invalid use of undefined type ‘struct bufdesc_ex’ drivers/net/ethernet/freescale/fec.c: In function ‘fec_enet_start_xmit’: drivers/net/ethernet/freescale/fec.c:286:37: error: arithmetic on pointer to an incomplete type drivers/net/ethernet/freescale/fec.c:287:13: error: arithmetic on pointer to an incomplete type drivers/net/ethernet/freescale/fec.c:324:7: error: dereferencing pointer to incomplete type etc.... Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-04net: fec: put tx to napi poll function to fix dead lockFrank Li1-3/+0
up stack ndo_start_xmit already hold lock. fec_enet_start_xmit needn't spin lock. stat_xmit just update fep->cur_tx fec_enet_tx just update fep->dirty_tx Reserve a empty bdb to check full or empty cur_tx == dirty_tx means full cur_tx == dirty_tx +1 means empty So needn't is_full variable. Fix spin lock deadlock ================================= [ INFO: inconsistent lock state ] 3.8.0-rc5+ #107 Not tainted --------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. ptp4l/615 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&list->lock)->rlock#3){?.-...}, at: [<8042c3c4>] skb_queue_tail+0x20/0x50 {HARDIRQ-ON-W} state was registered at: [<80067250>] mark_lock+0x154/0x4e8 [<800676f4>] mark_irqflags+0x110/0x1a4 [<80069208>] __lock_acquire+0x494/0x9c0 [<80069ce8>] lock_acquire+0x90/0xa4 [<80527ad0>] _raw_spin_lock_bh+0x44/0x54 [<804877e0>] first_packet_length+0x38/0x1f0 [<804879e4>] udp_poll+0x4c/0x5c [<804231f8>] sock_poll+0x24/0x28 [<800d27f0>] do_poll.isra.10+0x120/0x254 [<800d36e4>] do_sys_poll+0x15c/0x1e8 [<800d3828>] sys_poll+0x60/0xc8 [<8000e780>] ret_fast_syscall+0x0/0x3c *** DEADLOCK *** 1 lock held by ptp4l/615: #0: (&(&fep->hw_lock)->rlock){-.-...}, at: [<80355f9c>] fec_enet_tx+0x24/0x268 stack backtrace: Backtrace: [<800121e0>] (dump_backtrace+0x0/0x10c) from [<80516210>] (dump_stack+0x18/0x1c) r6:8063b1fc r5:bf38b2f8 r4:bf38b000 r3:bf38b000 [<805161f8>] (dump_stack+0x0/0x1c) from [<805189d0>] (print_usage_bug.part.34+0x164/0x1a4) [<8051886c>] (print_usage_bug.part.34+0x0/0x1a4) from [<80518a88>] (print_usage_bug+0x78/0x88) r8:80065664 r7:bf38b2f8 r6:00000002 r5:00000000 r4:bf38b000 [<80518a10>] (print_usage_bug+0x0/0x88) from [<80518b58>] (mark_lock_irq+0xc0/0x270) r7:bf38b000 r6:00000002 r5:bf38b2f8 r4:00000000 [<80518a98>] (mark_lock_irq+0x0/0x270) from [<80067270>] (mark_lock+0x174/0x4e8) [<800670fc>] (mark_lock+0x0/0x4e8) from [<80067744>] (mark_irqflags+0x160/0x1a4) [<800675e4>] (mark_irqflags+0x0/0x1a4) from [<80069208>] (__lock_acquire+0x494/0x9c0) r5:00000002 r4:bf38b2f8 [<80068d74>] (__lock_acquire+0x0/0x9c0) from [<80069ce8>] (lock_acquire+0x90/0xa4) [<80069c58>] (lock_acquire+0x0/0xa4) from [<805278d8>] (_raw_spin_lock_irqsave+0x4c/0x60) [<8052788c>] (_raw_spin_lock_irqsave+0x0/0x60) from [<8042c3c4>] (skb_queue_tail+0x20/0x50) r6:bfbb2180 r5:bf1d0190 r4:bf1d0184 [<8042c3a4>] (skb_queue_tail+0x0/0x50) from [<8042c4cc>] (sock_queue_err_skb+0xd8/0x188) r6:00000056 r5:bfbb2180 r4:bf1d0000 r3:00000000 [<8042c3f4>] (sock_queue_err_skb+0x0/0x188) from [<8042d15c>] (skb_tstamp_tx+0x70/0xa0) r6:bf0dddb0 r5:bf1d0000 r4:bfbb2180 r3:00000004 [<8042d0ec>] (skb_tstamp_tx+0x0/0xa0) from [<803561d0>] (fec_enet_tx+0x258/0x268) r6:c089d260 r5:00001c00 r4:bfbd0000 [<80355f78>] (fec_enet_tx+0x0/0x268) from [<803562cc>] (fec_enet_interrupt+0xec/0xf8) [<803561e0>] (fec_enet_interrupt+0x0/0xf8) from [<8007d5b0>] (handle_irq_event_percpu+0x54/0x1a0) [<8007d55c>] (handle_irq_event_percpu+0x0/0x1a0) from [<8007d740>] (handle_irq_event+0x44/0x64) [<8007d6fc>] (handle_irq_event+0x0/0x64) from [<80080690>] (handle_fasteoi_irq+0xc4/0x15c) r6:bf0dc000 r5:bf811290 r4:bf811240 r3:00000000 [<800805cc>] (handle_fasteoi_irq+0x0/0x15c) from [<8007ceec>] (generic_handle_irq+0x28/0x38) r5:807130c8 r4:00000096 [<8007cec4>] (generic_handle_irq+0x0/0x38) from [<8000f16c>] (handle_IRQ+0x54/0xb4) r4:8071d280 r3:00000180 [<8000f118>] (handle_IRQ+0x0/0xb4) from [<80008544>] (gic_handle_irq+0x30/0x64) r8:8000e924 r7:f4000100 r6:bf0ddef8 r5:8071c974 r4:f400010c r3:00000000 [<80008514>] (gic_handle_irq+0x0/0x64) from [<8000e2e4>] (__irq_svc+0x44/0x5c) Exception stack(0xbf0ddef8 to 0xbf0ddf40) Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29net: fec: add napi support to improve proformanceFrank Li1-0/+2
Add napi support Before this patch iperf -s -i 1 ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.138 port 50004 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 41.2 MBytes 345 Mbits/sec [ 4] 1.0- 2.0 sec 43.7 MBytes 367 Mbits/sec [ 4] 2.0- 3.0 sec 42.8 MBytes 359 Mbits/sec [ 4] 3.0- 4.0 sec 43.7 MBytes 367 Mbits/sec [ 4] 4.0- 5.0 sec 42.7 MBytes 359 Mbits/sec [ 4] 5.0- 6.0 sec 43.8 MBytes 367 Mbits/sec [ 4] 6.0- 7.0 sec 43.0 MBytes 361 Mbits/sec After this patch [ 4] 2.0- 3.0 sec 51.6 MBytes 433 Mbits/sec [ 4] 3.0- 4.0 sec 51.8 MBytes 435 Mbits/sec [ 4] 4.0- 5.0 sec 52.2 MBytes 438 Mbits/sec [ 4] 5.0- 6.0 sec 52.1 MBytes 437 Mbits/sec [ 4] 6.0- 7.0 sec 52.1 MBytes 437 Mbits/sec [ 4] 7.0- 8.0 sec 52.3 MBytes 439 Mbits/sec Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18net: fec: enable pause frame to improve rx prefomance for 1G networkFrank Li1-0/+5
The limition of imx6 internal bus cause fec can't achieve 1G perfomance. There will be many packages lost because FIFO over run. This patch enable pause frame flow control. Before this patch iperf -s -i 1 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49773 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 6.35 MBytes 53.3 Mbits/sec [ 4] 1.0- 2.0 sec 3.39 MBytes 28.5 Mbits/sec [ 4] 2.0- 3.0 sec 2.63 MBytes 22.1 Mbits/sec [ 4] 3.0- 4.0 sec 1.10 MBytes 9.23 Mbits/sec ifconfig RX packets:46195 errors:1859 dropped:1 overruns:1859 frame:1859 After this patch iperf -s -i 1 [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49757 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 49.8 MBytes 418 Mbits/sec [ 4] 1.0- 2.0 sec 50.1 MBytes 420 Mbits/sec [ 4] 2.0- 3.0 sec 47.5 MBytes 399 Mbits/sec [ 4] 3.0- 4.0 sec 45.9 MBytes 385 Mbits/sec [ 4] 4.0- 5.0 sec 44.8 MBytes 376 Mbits/sec ifconfig RX packets:2348454 errors:0 dropped:16 overruns:0 frame:0 Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04NET: FEC: dynamtic check DMA desc buff typeFrank Li1-10/+6
MX6 and mx28 support enhanced DMA descriptor buff to support 1588 ptp. But MX25, MX3x, MX5x can't support enhanced DMA descriptor buff. Check fec type and choose correct DMA descriptor buff type. Remove static config CONFIG_FEC_PTP. ptp function will be auto detected. Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01FEC: Add time stamping code and a PTP hardware clockFrank Li1-0/+38
This patch adds a driver for the FEC(MX6) that offers time stamping and a PTP haderware clock. Because FEC\ENET(MX6) hardware frequency adjustment is complex, we have implemented this in software by changing the multiplication factor of the timecounter. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01net: fec: move fec_enet_private to header fileFrank Li1-0/+81
A new file fec_ptp.c will use fec_enet_private to support 1588 PTP move such structure to common header file fec.h Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-12net: fsl: fec: handle 10Mbps speed in RMII modeEric Benard1-0/+4
when the link is 10 Mbps and the mode is RMII, it's necessary to set FRCONT to 1 in MIIGSK_CFGR to divide the RMII source clock by 10 in order to support 10 Mbps operations. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12freescale: Move the Freescale driversJeff Kirsher1-0/+148
Move the Freescale drivers into drivers/net/ethernet/freescale/ and make the necessary Kconfig and Makefile changes. CC: Sandeep Gopalpet <sandeep.kumar@freescale.com> CC: Andy Fleming <afleming@freescale.com> CC: Shlomi Gridish <gridish@freescale.com> CC: Li Yang <leoli@freescale.com> CC: Pantelis Antoniou <pantelis.antoniou@gmail.com> CC: Vitaly Bordug <vbordug@ru.mvista.com> CC: Dan Malek <dmalek@jlc.net> CC: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.