aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/freescale (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+30
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: fec: use helpers for converting ns to timespec.Richard Cochran1-5/+2
This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: gianfar: use helpers for converting ns to timespec.Richard Cochran1-5/+3
This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: gianfar: convert to the 64 bit get/set time methods.Richard Cochran1-6/+7
The device features a 64 bit nanoseconds register, and so with this patch the driver is ready for the year 2038. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: fec: convert to the 64 bit get/set time methods.Richard Cochran1-4/+4
This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: fec: setup right value for mdio hold timeUwe Kleine-König1-3/+27
The FEC modules used on i.MX28 and newer have a register to tune the MDIO output hold time that should be at least 10 ns. Up to now this value was not explicitly set and so resulted in less hold time if the fec clock was faster than 100 MHz. This was noticed on an i.MX28 machine that uses an input clock of ~150 Mhz which resulted in unreliable communication with a Marvell switch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24ucc_geth: Intialize link state to down before register_netdevCliff Clark1-0/+3
ucc_geth was indicating link up after a port is administratively enabled even when nothing is plugged in. This causes user-space tools to see a spurious link up the first time after boot. Signed-off-by: Cliff Clark <cliff_clark@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-25/+12
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net/fsl: constify of_device_id arrayFabian Frederick10-12/+12
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16net/fsl: modify xgmac_mdio for little endian SoCsShaohui Xie1-28/+68
MDIO controller on little endian Socs, e.g. ls2085a is similar to the controller on big endian Socs, but the MDIO access is little endian, we use I/O accessor function to handle endianness, so the driver can run on little endian Socs. A property "little-endian" is used in DTS to indicate the MDIO is little endian, if driver probes the property, driver will access MDIO in little endian, otherwise, driver works in big endian by default. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16net/fsl: fix a bug in xgmac_mdioShaohui Xie1-1/+1
There is a bug in xgmac_wait_until_done() which mdio_stat should be used instead of mdio_data when checking if busy bit is cleared. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15gianfar: Consider dts property endianess on handlingJingchang Lu1-30/+47
Use of_property_read*() to get arch endian consistent property values. Do some refactoring in the process. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15gianfar: Make FCB access endian safeClaudiu Manoil2-12/+13
Use conversion macros to correctly access the BE fields of the Rx and Tx Frame Control Block on LE CPUs. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15gianfar: Make BDs access endian safeClaudiu Manoil2-54/+78
Use conversion macros to correctly access the BE fields of the Rx and Tx Buffer Descriptors on LE CPUs. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13Revert "net: fec: fix the warning found by dma debug"Fabio Estevam1-23/+11
This reverts commit 2b995f63987013bacde99168218f9c7b252bdcf1. Панов Андрей reported the following regression: "Commit 2b995f63987013bacde99168218f9c7b252bdcf1 in 4.0.0-rc3 introduces a nasty bug in transmit, corrupting packets. To reproduce: $ dd if=/dev/zero of=zeros bs=1M count=20 $ md5sum -b zeros 8f4e33f3dc3e414ff94e5fb6905cba8c *zeros This checksum is correct. Copy file "zeros" to another host with NFS, and it gets corrupted, checksum is changed. File should be big, small amounts of transmit isn't affected. I use an i.MX6 Quad board. If this commit is reverted, all works fine." Reported-by: Панов Андрей <rockford@yandex.ru> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11net/fsl: remove dependency FSL_SOC from MDIOShaohui Xie1-2/+0
FSL_PQ_MDIO and FSL_XGMAC_MDIO are not really depend on FSL_SOC, they can build on non-PPC platforms. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10net: fec: fix receive VLAN CTAG HW acceleration issueNimrod Andy1-2/+1
The current driver support receive VLAN CTAG HW acceleration feature (NETIF_F_HW_VLAN_CTAG_RX) through software simulation. There calls the api .skb_copy_to_linear_data_offset() to skip the VLAN tag, but there have overlap between the two memory data point range. The patch just fix the issue. V2: Michael Grzeschik suggest to use memmove() instead of skb_copy_to_linear_data_offset(). Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Fixes: 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance") Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+18
Conflicts: drivers/net/ethernet/cadence/macb.c Overlapping changes in macb driver, mostly fixes and cleanups in 'net' overlapping with the integration of at91_ether into macb in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08ethernet: codespell comment spelling fixesJoe Perches1-1/+1
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05net: fec: fix unbalanced clk disable on driver unbindStefan Agner1-1/+0
When the driver is removed (e.g. using unbind through sysfs), the clocks get disabled twice, once on fec_enet_close and once on fec_drv_remove. Since the clocks are enabled only once, this leads to a warning: WARNING: CPU: 0 PID: 402 at drivers/clk/clk.c:992 clk_core_disable+0x64/0x68() Remove the call to fec_enet_clk_enable in fec_drv_remove to balance the clock enable/disable calls again. This has been introduce by e8fcfcd5684a ("net: fec: optimize the clock management to save power"). Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05net: gianfar: correctly determine the number of queue groupsTobias Waldekranz1-2/+17
eTSEC of-nodes may have children which are not queue-group nodes. For example new-style fixed-phy declarations. These where incorrectly assumed to be additional queue-groups. Change the search to filter out any nodes which are not queue-groups, or have been disabled. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04net: fec: fix rcv is not last issue when do suspend/resume testFugang Duan1-1/+1
When do suspend/resume stress test, some log shows "rcv is not +last". The issue is that enet suspend will disable phy clock, phy link down, after resume back, enet MAC redo initial and ready to tx/rx packet, but phy still is not ready which is doing auto-negotiation. When phy link is not up, don't schdule napi soft irq. [Peter] It has fixed kernel panic after long time suspend/resume test with nfs rootfs. [ 8864.429458] fec 2188000.ethernet eth0: rcv is not +last [ 8864.434799] fec 2188000.ethernet eth0: rcv is not +last [ 8864.440088] fec 2188000.ethernet eth0: rcv is not +last [ 8864.445424] fec 2188000.ethernet eth0: rcv is not +last [ 8864.450782] fec 2188000.ethernet eth0: rcv is not +last [ 8864.456111] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 8864.464225] pgd = 80004000 [ 8864.466997] [00000000] *pgd=00000000 [ 8864.470627] Internal error: Oops: 17 [#1] SMP ARM [ 8864.475353] Modules linked in: evbug [ 8864.479006] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc1-00044-g7a2a1d2 #234 [ 8864.486854] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 8864.492709] task: be069380 ti: be07a000 task.ti: be07a000 [ 8864.498137] PC is at memcpy+0x80/0x330 [ 8864.501919] LR is at gro_pull_from_frag0+0x34/0xa8 [ 8864.506735] pc : [<802bb080>] lr : [<8057c204>] psr: 00000113 [ 8864.506735] sp : be07bbd4 ip : 00000010 fp : be07bc0c [ 8864.518235] r10: 0000000e r9 : 00000000 r8 : 809c7754 [ 8864.523479] r7 : 809c7754 r6 : bb43c040 r5 : bd280cc0 r4 : 00000012 [ 8864.530025] r3 : 00000804 r2 : fffffff2 r1 : 00000000 r0 : bb43b83c [ 8864.536575] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8864.543904] Control: 10c5387d Table: bd14c04a DAC: 00000015 [ 8864.549669] Process ksoftirqd/0 (pid: 3, stack limit = 0xbe07a210) [ 8864.555869] Stack: (0xbe07bbd4 to 0xbe07c000) [ 8864.560250] bbc0: bd280cc0 bb43c040 809c7754 [ 8864.568455] bbe0: 809c7754 bb43b83c 00000012 8057c204 00000000 bd280cc0 bd8a0718 00000003 [ 8864.576658] bc00: be07bc5c be07bc10 8057ebf0 8057c1dc 00000000 00000000 8057ecc4 bef59760 [ 8864.584863] bc20: 00000002 bd8a0000 be07bc64 809c7754 00000000 bd8a0718 bd280cc0 bd8a0000 [ 8864.593066] bc40: 00000000 0000001c 00000000 bd8a0000 be07bc74 be07bc60 8057f148 8057eb90 [ 8864.601268] bc60: bf0810a0 00000000 be07bcf4 be07bc78 8044e7b4 8057f12c 00000000 8007df6c [ 8864.609470] bc80: bd8a0718 00000040 00000000 bd280a80 00000002 00000019 bd8a0600 bd8a1214 [ 8864.617672] bca0: bd8a0690 bf0810a0 00000000 00000000 bd8a1000 00000000 00000027 bd280cc0 [ 8864.625874] bcc0: 80062708 800625cc 000943db bd8a0718 00000001 000d1166 00000040 be7c1ec0 [ 8864.634077] bce0: 0000012c be07bd00 be07bd3c be07bcf8 8057fc98 8044e3ac 809c2ec0 3ddff000 [ 8864.642280] bd00: be07bd00 be07bd00 be07bd08 be07bd08 00000000 00000020 809c608c 00000003 [ 8864.650481] bd20: 809c6080 40000001 809c6088 00200100 be07bd84 be07bd40 8002e690 8057fac8 [ 8864.658684] bd40: be07bd64 be07bd50 00000001 04208040 000d1165 0000000a be07bd84 809c0d7c [ 8864.666885] bd60: 00000000 809c6af8 00000000 00000001 be008000 00000000 be07bd9c be07bd88 [ 8864.675087] bd80: 8002eb64 8002e564 00000125 809c0d7c be07bdc4 be07bda0 8006f100 8002eaac [ 8864.683291] bda0: c080e10c be07bde8 809c6c6c c080e100 00000002 00000000 be07bde4 be07bdc8 [ 8864.691492] bdc0: 800087a0 8006f098 806f2934 20000013 ffffffff be07be1c be07be44 be07bde8 [ 8864.699695] bde0: 800133a4 80008784 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.707896] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.716098] be20: 8006278c 806f2934 20000013 ffffffff be069380 be7c1680 be07be7c be07be48 [ 8864.724300] be40: 80049cfc 806f2910 00000001 00000000 80049cb4 00000000 be07be7c be7c1680 [ 8864.732502] be60: be3289c0 be069380 bd23b600 be0cfe00 be07bebc be07be80 806ed614 80049c68 [ 8864.740706] be80: be07a000 0000020a 809c608c 00000003 00000001 8002e858 be07a000 be035740 [ 8864.748907] bea0: 00000000 00000001 809d4598 00000000 be07bed4 be07bec0 806edd0c 806ed440 [ 8864.757110] bec0: be07a000 be07a000 be07bee4 be07bed8 806edd68 806edcf0 be07bef4 be07bee8 [ 8864.765311] bee0: 8002e860 806edd34 be07bf24 be07bef8 800494b0 8002e828 be069380 00000000 [ 8864.773512] bf00: be035780 be035740 8004938c 00000000 00000000 00000000 be07bfac be07bf28 [ 8864.781715] bf20: 80045928 80049398 be07bf44 00000001 00000000 be035740 00000000 00030003 [ 8864.789917] bf40: dead4ead ffffffff ffffffff 80a2716c 80b59b00 00000000 8088c954 be07bf5c [ 8864.798120] bf60: be07bf5c 00000000 00000000 dead4ead ffffffff ffffffff 80a2716c 00000000 [ 8864.806320] bf80: 00000000 8088c954 be07bf88 be07bf88 be035780 8004584c 00000000 00000000 [ 8864.814523] bfa0: 00000000 be07bfb0 8000ed10 80045858 00000000 00000000 00000000 00000000 [ 8864.822723] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 8864.830925] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 5ffbb5f7 f9fcf5e7 [ 8864.839115] Backtrace: [ 8864.841631] [<8057c1d0>] (gro_pull_from_frag0) from [<8057ebf0>] (dev_gro_receive+0x6c/0x3f8) [ 8864.850173] r6:00000003 r5:bd8a0718 r4:bd280cc0 r3:00000000 [ 8864.855958] [<8057eb84>] (dev_gro_receive) from [<8057f148>] (napi_gro_receive+0x28/0xac) [ 8864.864152] r10:bd8a0000 r9:00000000 r8:0000001c r7:00000000 r6:bd8a0000 r5:bd280cc0 [ 8864.872115] r4:bd8a0718 [ 8864.874713] [<8057f120>] (napi_gro_receive) from [<8044e7b4>] (fec_enet_rx_napi+0x414/0xc74) [ 8864.883167] r5:00000000 r4:bf0810a0 [ 8864.886823] [<8044e3a0>] (fec_enet_rx_napi) from [<8057fc98>] (net_rx_action+0x1dc/0x2ec) [ 8864.895016] r10:be07bd00 r9:0000012c r8:be7c1ec0 r7:00000040 r6:000d1166 r5:00000001 [ 8864.902982] r4:bd8a0718 [ 8864.905570] [<8057fabc>] (net_rx_action) from [<8002e690>] (__do_softirq+0x138/0x2c4) [ 8864.913417] r10:00200100 r9:809c6088 r8:40000001 r7:809c6080 r6:00000003 r5:809c608c [ 8864.921382] r4:00000020 [ 8864.923966] [<8002e558>] (__do_softirq) from [<8002eb64>] (irq_exit+0xc4/0x138) [ 8864.931289] r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:809c6af8 r5:00000000 [ 8864.939252] r4:809c0d7c [ 8864.941841] [<8002eaa0>] (irq_exit) from [<8006f100>] (__handle_domain_irq+0x74/0xe8) [ 8864.949688] r4:809c0d7c r3:00000125 [ 8864.953342] [<8006f08c>] (__handle_domain_irq) from [<800087a0>] (gic_handle_irq+0x28/0x68) [ 8864.961707] r9:00000000 r8:00000002 r7:c080e100 r6:809c6c6c r5:be07bde8 r4:c080e10c [ 8864.969597] [<80008778>] (gic_handle_irq) from [<800133a4>] (__irq_svc+0x44/0x5c) [ 8864.977097] Exception stack(0xbe07bde8 to 0xbe07be30) [ 8864.982173] bde0: 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.990377] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.998573] be20: 8006278c 806f2934 20000013 ffffffff [ 8865.003638] r7:be07be1c r6:ffffffff r5:20000013 r4:806f2934 [ 8865.009447] [<806f2904>] (_raw_spin_unlock_irq) from [<80049cfc>] (finish_task_switch+0xa0/0x160) [ 8865.018334] r4:be7c1680 r3:be069380 [ 8865.021993] [<80049c5c>] (finish_task_switch) from [<806ed614>] (__schedule+0x1e0/0x5dc) [ 8865.030098] r8:be0cfe00 r7:bd23b600 r6:be069380 r5:be3289c0 r4:be7c1680 [ 8865.036942] [<806ed434>] (__schedule) from [<806edd0c>] (preempt_schedule_common+0x28/0x44) [ 8865.045307] r9:00000000 r8:809d4598 r7:00000001 r6:00000000 r5:be035740 r4:be07a000 [ 8865.053197] [<806edce4>] (preempt_schedule_common) from [<806edd68>] (_cond_resched+0x40/0x48) [ 8865.061822] r4:be07a000 r3:be07a000 [ 8865.065472] [<806edd28>] (_cond_resched) from [<8002e860>] (run_ksoftirqd+0x44/0x64) [ 8865.073252] [<8002e81c>] (run_ksoftirqd) from [<800494b0>] (smpboot_thread_fn+0x124/0x190) [ 8865.081550] [<8004938c>] (smpboot_thread_fn) from [<80045928>] (kthread+0xdc/0xf8) [ 8865.089133] r10:00000000 r9:00000000 r8:00000000 r7:8004938c r6:be035740 r5:be035780 [ 8865.097097] r4:00000000 r3:be069380 [ 8865.100752] [<8004584c>] (kthread) from [<8000ed10>] (ret_from_fork+0x14/0x24) [ 8865.107990] r7:00000000 r6:00000000 r5:8004584c r4:be035780 [ 8865.113767] Code: e320f000 e4913004 e4914004 e4915004 (e4916004) [ 8865.120006] ---[ end trace b0a4c6bd499288ca ]--- [ 8865.124697] Kernel panic - not syncing: Fatal exception in interrupt [ 8865.131084] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Cc: [v3.19+] stable@vger.kernel.org Tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03gianfar: Reduce logging noise seen due to phy polling if link is downGuenter Roeck1-2/+2
Commit 6ce29b0e2a04 ("gianfar: Avoid unnecessary reg accesses in adjust_link()") eliminates unnecessary calls to adjust_link for phy devices which don't support interrupts and need polling. As part of that work, the 'new_state' local flag, which was used to reduce logging noise on the console, was eliminated. Unfortunately, that means that a 'Link is Down' log message will now be issued continuously if a link is configured as UP, the link state is down, and the associated phy requires polling. This occurs because priv->oldduplex is -1 in this case, which always differs from phydev->duplex. In addition, phydev->speed may also differ from priv->oldspeed. gfar_update_link_state() is therefore called each time a phy is polled, even if the link state did not change. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net: fec: Delete unnecessary checks before the function call "kfree"Markus Elfring1-5/+2
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04gianfar: correct the bad expression while writing bit-patternSanjeev Sharma1-1/+1
This patch correct the bad expression while writing the bit-pattern from software's buffer to hardware registers. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04net: fs_enet: Implement NETIF_F_SG featureLEROY Christophe2-30/+66
Freescale ethernet controllers have the capability to re-assemble fragmented data into a single ethernet frame. This patch uses this capability and implements NETIP_F_SG feature into the fs_enet ethernet driver. On a MPC885, I get 53% performance improvement on a ftp transfer of a 15Mb file: * Without the patch : 2,8 Mbps * With the patch : 4,3 Mbps Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29net: gianfar: remove the unneeded check of disabled deviceKevin Hao1-1/+1
Since commit cd1e65044d44 ("of/device: Don't register disabled devices"), the disabled device will not be registered at all. So we don't need to do the check again in the platform device driver. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/fsl: Replace spin_event_timeout() with arch independent in xgmac_mdioShaohui Xie1-8/+16
spin_event_timeout() is PPC dependent, use an arch independent equivalent instead. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/fsl: drop in_be32() & out_be32() in xgmac_mdioShaohui Xie1-14/+14
Use ioread32be() & iowrite32be() instead. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24net: fec: fix the warning found by dma debugNimrod Andy1-11/+23
Enable kernel config "CONFIG_HAVE_DMA_API_DEBUG", FEC have kernel warning: [ 6.650444] fec 2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [ 6.664289] Modules linked in: [ 6.667378] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 3.19.0-rc4-00688-g8834016-dirty #150 [ 6.675841] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 6.681698] Backtrace: [ 6.684189] [<80011e3c>] (dump_backtrace) from [<80011fdc>] (show_stack+0x18/0x1c) [ 6.691789] r6:80890154 r5:00000000 r4:00000000 r3:00000000 [ 6.697533] [<80011fc4>] (show_stack) from [<806d2d88>] (dump_stack+0x80/0x9c) [ 6.704799] [<806d2d08>] (dump_stack) from [<8002a4e4>] (warn_slowpath_common+0x7c/0xb4) [ 6.712917] r5:00000445 r4:00000000 [ 6.716544] [<8002a468>] (warn_slowpath_common) from [<8002a5c0>] (warn_slowpath_fmt+0x38/0x40) [ 6.725265] r8:809a2ee8 r7:00000000 r6:00000000 r5:00000000 r4:00000042 [ 6.732087] [<8002a58c>] (warn_slowpath_fmt) from [<802d6268>] (check_unmap+0x86c/0x98c) [ 6.740202] r3:808c79bc r2:8089060c [ 6.743826] [<802d59fc>] (check_unmap) from [<802d65e4>] (debug_dma_unmap_page+0x80/0x88) [ 6.752029] r10:00000000 r9:00000000 r8:00000000 r7:00000001 r6:be12a410 r5:00000000 [ 6.759967] r4:00000042 [ 6.762538] [<802d6564>] (debug_dma_unmap_page) from [<80440248>] (fec_enet_rx_napi+0x7ec/0xb9c) [ 6.771345] r7:00000400 r6:be3e4000 r5:bf08fa20 r4:be036000 [ 6.777094] [<8043fa5c>] (fec_enet_rx_napi) from [<8056ae24>] (net_rx_action+0x134/0x324) [ 6.785297] r10:be089e60 r9:80998180 r8:ffff8d68 r7:0000012c r6:00000040 r5:00000001 [ 6.793239] r4:be036718 [ 6.795801] [<8056acf0>] (net_rx_action) from [<8002db24>] (__do_softirq+0x138/0x2d0) [ 6.803655] r10:00000003 r9:00000003 r8:80996378 r7:8099c080 r6:00000100 r5:8099c08c [ 6.811593] r4:00000000 [ 6.814157] [<8002d9ec>] (__do_softirq) from [<8002dd00>] (run_ksoftirqd+0x44/0x5c) [ 6.821836] r10:00000000 r9:00000000 r8:809b133c r7:00000000 r6:00000001 r5:00000000 [ 6.829775] r4:be027e80 [ 6.832346] [<8002dcbc>] (run_ksoftirqd) from [<80048290>] (smpboot_thread_fn+0x154/0x1c4) [ 6.840649] [<8004813c>] (smpboot_thread_fn) from [<80044780>] (kthread+0xdc/0xf8) [ 6.848224] r10:00000000 r8:00000000 r7:8004813c r6:be027e80 r5:be027ec0 r4:00000000 [ 6.856179] [<800446a4>] (kthread) from [<8000ebc8>] (ret_from_fork+0x14/0x2c) [ 6.863425] r7:00000000 r6:00000000 r5:800446a4 r4:be027ec0 [ 6.869156] ---[ end trace 861cf914d2461a8b ]--- There have one bug in .fec_enet_tx_queue() function to unmap the DMA memory: For SG or TSO, get one buffer descriptor and then unmap the related DMA memory, and then get the next buffer descriptor, loop to while() to check "TX_READY". If "TX_READY" bit still __IS__ existed in the BD (The next fraglist or next TSO packet is not transmited complitely), exit the current clean work. When the next work is triggered, it still repeat above step with the same BD. The potential issue is that unmap the same DMA memory for multiple times. The patch fix the clean work for SG and TSO packet. Reported-by: Anand Moon <moon.linux@yahoo.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+8
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: fec: fix MDIO bus assignement for dual fec SoC'sStefan Agner2-4/+7
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-2/+2
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net/fsl: replace (1 << x) with BIT(x) for bit definitions in xgmac_mdioShaohui Xie1-7/+7
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net/fsl: fix a bug in xgmac_mdioShaohui Xie1-1/+1
There is a bug in xgmac_mdio_read when clear the bit MDIO_STAT_ENC, which '&' is missed in 'mdio_stat &= ~MDIO_STAT_ENC'. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-08net: fec: fix NULL pointer dereference in fec_enet_timeout_workHubert Feurstein1-0/+1
This patch initialises the fep->netdev pointer. This pointer was not initialised at all, but is used in fec_enet_timeout_work and in some error paths. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06net/fsl: Add mEMAC MDIO support to XGMAC MDIOAndy Fleming2-12/+55
The Freescale mEMAC supports operating at 10/100/1000/10G, and its associated MDIO controller is likewise capable of operating both Clause 22 and Clause 45 MDIO buses. It is nearly identical to the MDIO controller on the XGMAC, so we just modify that driver. Portions of this driver developed by: Sandeep Singh <sandeep@freescale.com> Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net/fsl: remove hardcoded clock setting from xgmac_mdioShaohui Xie1-14/+0
There is no need to set the clock speed in read/write which will be performed unnecessarily for each mdio access. Init it during probe is enough. Also, the hardcoded clock value is not a proper way for all SoCs. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net/fsl: remove irq assignment from xgmac_mdioShaohui Xie1-2/+1
Which is wrong and not used, so no extra space needed by mdiobus_alloc_size(), use mdiobus_alloc() instead. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net/fsl: remove reset from xgmac_mdioShaohui Xie1-19/+0
Since the reset is just clock setting, individual mdio reset is not available. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31net: fec: add Wake-on-LAN supportNimrod Andy2-10/+96
Support for Wake-on-LAN using Magic Packet. ENET IP supports sleep mode in low power status, when system enter suspend status, Magic packet can wake up system even if all SOC clocks are gate. The patch doing below things: - flagging the device as a wakeup source for the system, as well as its Wake-on-LAN interrupt - prepare the hardware for entering WoL mode - add standard ethtool WOL interface - enable the ENET interrupt to wake us Tested on i.MX6q/dl sabresd, sabreauto boards, i.MX6SX arm2 boards. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: gianfar: add missing __iomem annotationKevin Hao2-2/+2
Fix the following spare warning: drivers/net/ethernet/freescale/gianfar.c:3521:60: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/freescale/gianfar.c:3521:60: expected unsigned int [noderef] <asn:2>*addr drivers/net/ethernet/freescale/gianfar.c:3521:60: got unsigned int [usertype] *rfbptr drivers/net/ethernet/freescale/gianfar.c:205:16: warning: incorrect type in assignment (different address spaces) drivers/net/ethernet/freescale/gianfar.c:205:16: expected unsigned int [usertype] *rfbptr drivers/net/ethernet/freescale/gianfar.c:205:16: got unsigned int [noderef] <asn:2>*<noident> drivers/net/ethernet/freescale/gianfar.c:2918:44: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/freescale/gianfar.c:2918:44: expected unsigned int [noderef] <asn:2>*addr drivers/net/ethernet/freescale/gianfar.c:2918:44: got unsigned int [usertype] *rfbptr Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: gianfar: mark the local functions staticKevin Hao1-4/+5
Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: fec: convert to timecounter adjtime.Richard Cochran1-15/+1
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30time: move the timecounter/cyclecounter code into its own file.Richard Cochran1-0/+1
The timecounter code has almost nothing to do with the clocksource code. Let it live in its own file. This will help isolate the timecounter users from the clocksource users in the source tree. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16net: fec: Fix NAPI raceNimrod Andy1-12/+7
Do camera capture test on i.MX6q sabresd board, and save the capture data to nfs rootfs. The command is: gst-launch-1.0 -e imxv4l2src device=/dev/video1 num-buffers=2592000 ! tee name=t ! queue ! imxv4l2sink sync=false t. ! queue ! vpuenc ! queue ! mux. pulsesrc num-buffers=3720937 blocksize=4096 ! 'audio/x-raw, rate=44100, channels=2' ! queue ! imxmp3enc ! mpegaudioparse ! queue ! mux. qtmux name=mux ! filesink location=video_recording_long.mov After about 10 hours running, there have net watchdog timeout kernel dump: ... WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x2b4/0x2d8() NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.24-01051-gdb840b7 #440 [<80014e6c>] (unwind_backtrace) from [<800118ac>] (show_stack+0x10/0x14) [<800118ac>] (show_stack) from [<806ae3f0>] (dump_stack+0x78/0xc0) [<806ae3f0>] (dump_stack) from [<8002b504>] (warn_slowpath_common+0x68/0x8c) [<8002b504>] (warn_slowpath_common) from [<8002b558>] (warn_slowpath_fmt+0x30/0x40) [<8002b558>] (warn_slowpath_fmt) from [<8055e0d4>] (dev_watchdog+0x2b4/0x2d8) [<8055e0d4>] (dev_watchdog) from [<800352d8>] (call_timer_fn.isra.33+0x24/0x8c) [<800352d8>] (call_timer_fn.isra.33) from [<800354c4>] (run_timer_softirq+0x184/0x220) [<800354c4>] (run_timer_softirq) from [<8002f420>] (__do_softirq+0xc0/0x22c) [<8002f420>] (__do_softirq) from [<8002f804>] (irq_exit+0xa8/0xf4) [<8002f804>] (irq_exit) from [<8000ee5c>] (handle_IRQ+0x54/0xb4) [<8000ee5c>] (handle_IRQ) from [<80008598>] (gic_handle_irq+0x28/0x5c) [<80008598>] (gic_handle_irq) from [<800123c0>] (__irq_svc+0x40/0x74) Exception stack(0x80d27f18 to 0x80d27f60) 7f00: 80d27f60 0000014c 7f20: 8858c60e 0000004d 884e4540 0000004d ab7250d0 80d34348 00000000 00000000 7f40: 00000001 00000000 00000017 80d27f60 800702a4 80476e6c 600f0013 ffffffff [<800123c0>] (__irq_svc) from [<80476e6c>] (cpuidle_enter_state+0x50/0xe0) [<80476e6c>] (cpuidle_enter_state) from [<80476fa8>] (cpuidle_idle_call+0xac/0x154) [<80476fa8>] (cpuidle_idle_call) from [<8000f174>] (arch_cpu_idle+0x8/0x44) [<8000f174>] (arch_cpu_idle) from [<80064c54>] (cpu_startup_entry+0x100/0x158) [<80064c54>] (cpu_startup_entry) from [<80cd8a9c>] (start_kernel+0x304/0x368) ---[ end trace 09ebd32fb032f86d ]--- ... There might have a race in napi_schedule(), leaving interrupts disabled forever. After these patch, the case still work more than 40 hours running. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-14Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds9-9/+0
Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-11gianfar: Fix dma check map error when DMA_API_DEBUG is enabledKevin Hao1-28/+56
We need to use dma_mapping_error() to check the dma address returned by dma_map_single/page(). Otherwise we would get warning like this: WARNING: at lib/dma-debug.c:1140 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc2-next-20141029 #196 task: c0834300 ti: effe6000 task.ti: c0874000 NIP: c02b2c98 LR: c02b2c98 CTR: c030abc4 REGS: effe7d70 TRAP: 0700 Not tainted (3.18.0-rc2-next-20141029) MSR: 00021000 <CE,ME> CR: 22044022 XER: 20000000 GPR00: c02b2c98 effe7e20 c0834300 00000098 00021000 00000000 c030b898 00000003 GPR08: 00000001 00000000 00000001 749eec9d 22044022 1001abe0 00000020 ef278678 GPR16: ef278670 ef278668 ef278660 070a8040 c087f99c c08cdc60 00029000 c0840d44 GPR24: c08be6e8 c0840000 effe7e78 ef041340 00000600 ef114e10 00000000 c08be6e0 NIP [c02b2c98] check_unmap+0x51c/0x9e4 LR [c02b2c98] check_unmap+0x51c/0x9e4 Call Trace: [effe7e20] [c02b2c98] check_unmap+0x51c/0x9e4 (unreliable) [effe7e70] [c02b31d8] debug_dma_unmap_page+0x78/0x8c [effe7ed0] [c03d1640] gfar_clean_rx_ring+0x208/0x488 [effe7f40] [c03d1a9c] gfar_poll_rx_sq+0x3c/0xa8 [effe7f60] [c04f8714] net_rx_action+0xc0/0x178 [effe7f90] [c00435a0] __do_softirq+0x100/0x1fc [effe7fe0] [c0043958] irq_exit+0xa4/0xc8 [effe7ff0] [c000d14c] call_do_irq+0x24/0x3c [c0875e90] [c00048a0] do_IRQ+0x8c/0xf8 [c0875eb0] [c000ed10] ret_from_except+0x0/0x18 For TX, we need to unmap the pages which has already been mapped and free the skb before return. For RX, move the dma mapping and error check to gfar_new_skb(). We would reuse the original skb in the rx ring when either allocating skb failure or dma mapping error. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: fec: only enable mdio interrupt before phy device link upNimrod Andy1-1/+4
Before phy device link up, we only enable FEC mdio interrupt, which is more reasonable. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.