aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/freescale (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-10-08net: enetc: add support for software TSOIoana Ciornei4-24/+311
This patch adds support for driver level TSO in the enetc driver using the TSO API. Beside using the usual tso_build_hdr(), tso_build_data() this specific implementation also has to compute the checksum, both IP and L4, for each resulted segment. This is because the ENETC controller does not support Tx checksum offload which is needed in order to take advantage of TSO. With the workaround for the ENETC MDIO erratum in place the Tx path of the driver is forced to lock/unlock for each skb sent. This is why, even though we are computing the checksum by hand we see the following improvement in TCP termination on the LS1028A SoC, on a single A72 core running at 1.3GHz: before: 1.63 Gbits/sec after: 2.34 Gbits/sec Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08net: enetc: declare NETIF_F_HW_CSUM and do it in softwareIoana Ciornei3-5/+15
This is just a preparation patch for software TSO in the enetc driver. Unfortunately, ENETC does not support Tx checksum offload which would normally render TSO, even software, impossible. Declare NETIF_F_HW_CSUM as part of the feature set and do it at driver level using skb_csum_hwoffload_help() so that we can move forward and also add support for TSO in the next patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski4-4/+4
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski7-8/+8
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04net: ethernet: use phylink_set_10g_modes()Russell King (Oracle)1-6/+1
Update three drivers to use the new phylink_set_10g_modes() helper: Cadence macb, Freescale DPAA2 and Marvell PP2. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+1
drivers/net/phy/bcm7xxx.c d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations") f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") net/sched/sch_api.c b193e15ac69d ("net: prevent user from passing illegal stab size") 69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers") Both cases trivial - adjacent code additions. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-27dpaa2-eth: Register devlink instance at the end of probeLeon Romanovsky3-7/+21
Move devlink_register to be the last command in the initialization sequence. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24net: enetc: fix the incorrect clearing of IF_MODE bitsVladimir Oltean1-2/+1
The enetc phylink .mac_config handler intends to clear the IFMODE field (bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the other fields instead. For normal operation, the bug was inconsequential, due to the fact that we write the PM0_IF_MODE register in two stages, first in phylink .mac_config (which incorrectly cleared out a bunch of stuff), then we update the speed and duplex to the correct values in phylink .mac_link_up. Judging by the code (not tested), it looks like maybe loopback mode was broken, since this is one of the settings in PM0_IF_MODE which is incorrectly cleared. Fixes: c76a97218dcb ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode") Reported-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-8/+4
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky1-12/+1
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: freescale: drop unneeded MODULE_ALIASKrzysztof Kozlowski1-1/+0
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dpaa2-mac: add support for more ethtool 10G link modesRussell King1-0/+5
Phylink documentation says: Note that the PHY may be able to transform from one connection technology to another, so, eg, don't clear 1000BaseX just because the MAC is unable to BaseX mode. This is more about clearing unsupported speeds and duplex settings. The port modes should not be cleared; phylink_set_port_modes() will help with this. So add the missing 10G modes. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Marek Behún <kabel@kernel.org> Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19enetc: Fix uninitialized struct dim_sample field usageClaudiu Manoil1-1/+1
The only struct dim_sample member that does not get initialized by dim_update_sample() is comp_ctr. (There is special API to initialize comp_ctr: dim_update_sample_with_comps(), and it is currently used only for RDMA.) comp_ctr is used to compute curr_stats->cmps and curr_stats->cpe_ratio (see dim_calc_stats()) which in turn are consumed by the rdma_dim_*() API. Therefore, functionally, the net_dim*() API consumers are not affected. Nevertheless, fix the computation of statistics based on an uninitialized variable, even if the mentioned statistics are not used at the moment. Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19enetc: Fix illegal access when reading affinity_hintClaudiu Manoil1-4/+1
irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17net: update NXP copyright textVladimir Oltean2-2/+2
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16net: enetc: Make use of the helper function dev_err_probe()Cai Huoqing4-20/+10
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, and simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31dpaa2-eth: Replace strlcpy with strscpyJason Wang1-4/+4
The strlcpy should not be used because it doesn't limit the source length. As linus says, it's a completely useless function if you can't implicitly trust the source string - but that is almost always why people think they should use it! All in all the BSD function will lead some potential bugs. But the strscpy doesn't require reading memory from the src string beyond the specified "count" bytes, and since the return value is easier to error-check than strlcpy()'s. In addition, the implementation is robust to the string changing out from underneath it, unlike the current strlcpy() implementation. Thus, We prefer using strscpy instead of strlcpy. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo4-11/+27
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-20net: dpaa2-switch: call dpaa2_switch_port_disconnect_mac on probe error pathVladimir Oltean1-5/+14
Currently when probing returns an error, the netdev is freed but phylink_disconnect is not called. Create a common function between the unbind path and the error path, call it the opposite of dpaa2_switch_probe_port: dpaa2_switch_remove_port, and call it from both the unbind and the error path. Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: dpaa2-switch: phylink_disconnect_phy needs rtnl_lockVladimir Oltean1-0/+4
There is an ASSERT_RTNL in phylink_disconnect_phy which triggers whenever dpaa2_switch_port_disconnect_mac is called. To follow the pattern established by dpaa2_eth_disconnect_mac, take the rtnl_mutex every time we call dpaa2_switch_port_disconnect_mac. Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-18/+18
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19net: dpaa2-switch: disable the control interface on error pathVladimir Oltean1-18/+18
Currently dpaa2_switch_takedown has a funny name and does not do the opposite of dpaa2_switch_init, which makes probing fail when we need to handle an -EPROBE_DEFER. A sketch of what dpaa2_switch_init does: dpsw_open dpaa2_switch_detect_features dpsw_reset for (i = 0; i < ethsw->sw_attr.num_ifs; i++) { dpsw_if_disable dpsw_if_set_stp dpsw_vlan_remove_if_untagged dpsw_if_set_tci dpsw_vlan_remove_if } dpsw_vlan_remove alloc_ordered_workqueue dpsw_fdb_remove dpaa2_switch_ctrl_if_setup When dpaa2_switch_takedown is called from the error path of dpaa2_switch_probe(), the control interface, enabled by dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled, because dpaa2_switch_takedown does not call dpaa2_switch_ctrl_if_teardown. Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this means that a second probe of the driver will happen with the control interface directly enabled. This will trigger a second error: [ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed [ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13 [ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13 Which if we investigate the /dev/dpaa2_mc_console log, we find out is caused by: [E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in reasonable limits, no reason to change STP state, re-add VLANs etc), and rename it to something more conventional, like dpaa2_switch_teardown. Fixes: 613c0a5810b7 ("staging: dpaa2-switch: enable the control interface") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann1-1/+1
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13net: dpaa_eth: remove dead select in menuconfig FSL_DPAA_ETHLukas Bulwahn1-1/+0
The menuconfig FSL_DPAA_ETH selects config FSL_FMAN_MAC, but the config FSL_FMAN_MAC never existed in the kernel tree. Hence, ./scripts/checkkconfigsymbols.py warns: FSL_FMAN_MAC Referencing files: drivers/net/ethernet/freescale/dpaa/Kconfig Remove this dead select in menuconfig FSL_DPAA_ETH. Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13net: fec: add WoL support for i.MX8MQJoakim Zhang2-5/+23
By default FEC driver treat irq[0] (i.e. int0 described in dt-binding) as wakeup interrupt, but this situation changed on i.MX8M serials, SoC integration guys mix wakeup interrupt signal into int2 interrupt line. This patch introduces FEC_QUIRK_WAKEUP_FROM_INT2 to indicate int2 as wakeup interrupt for i.MX8MQ. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20210812070948.25797-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09net: fec: fix build error for ARCH m68kJoakim Zhang1-0/+2
reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross make.cross ARCH=m68k m5272c3_defconfig make.cross ARCH=m68k drivers/net/ethernet/freescale/fec_main.c: In function 'fec_enet_eee_mode_set': >> drivers/net/ethernet/freescale/fec_main.c:2758:33: error: 'FEC_LPI_SLEEP' undeclared (first use in this function); did you mean 'FEC_ECR_SLEEP'? 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel' 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~ drivers/net/ethernet/freescale/fec_main.c:2758:33: note: each undeclared identifier is reported only once for each function it appears in 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel' 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~ >> drivers/net/ethernet/freescale/fec_main.c:2759:32: error: 'FEC_LPI_WAKE' undeclared (first use in this function) 2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE); | ^~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2759:2: note: in expansion of macro 'writel' 2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE); | ^~~~~~ This patch adds register definition for M5272 platform to pass build. Fixes: b82f8c3f1409 ("net: fec: add eee mode tx lpi support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky1-2/+3
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net: fec: fix use-after-free in fec_drv_removePavel Skripkin1-1/+1
Smatch says: drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); Since fep pointer is netdev private data, accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-04dpaa2-switch: export MAC statistics in ethtoolIoana Ciornei1-5/+19
If a switch port is connected to a MAC, use the common dpaa2-mac support for exporting the available MAC statistics. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: add a prefix to HW ethtool statsIoana Ciornei1-12/+12
In the next patch, we'll add support for also exporting the MAC statistics in the ethtool stats. Annotate already present HW stats with a suggestive prefix. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: integrate the MAC endpoint supportIoana Ciornei5-7/+130
Integrate the common MAC endpoint management support into the dpaa2-switch driver as well. Nothing special happens here, just that the already available dpaa2-mac functions are also called from dpaa2-switch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04bus: fsl-mc: extend fsl_mc_get_endpoint() to pass interface IDIoana Ciornei1-1/+1
In case of a switch DPAA2 object, the interface ID is also needed when querying for the object endpoint. Extend fsl_mc_get_endpoint() so that users can also pass the interface ID that are interested in. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: no need to check link state right after ndo_openIoana Ciornei1-14/+0
The call to dpaa2_switch_port_link_state_update is a leftover from the time when on DPAA2 platforms the PHYs were started at boot time so when an ifconfig was issued on the associated interface, the link status needed to be checked directly from the ndo_open() callback. This is not needed anymore since we are now properly integrated with the PHY layer thus a link interrupt will come directly from the PHY eventually without the need to call the sync function. Fix this up by removing the call to dpaa2_switch_port_link_state_update. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: do not enable the DPSW at probe timeIoana Ciornei1-6/+0
We should not enable the switch interfaces at probe time since this is trigged by the open callback. Remove the call dpsw_enable() which does exactly this. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: use the port index in the IRQ handlerIoana Ciornei1-16/+11
The MC firmware supplies us the switch interface index for which an interrupt was triggered. Use this to our advantage instead of looping through all the switch ports and doing unnecessary work. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: request all interrupts sources on the DPSWIoana Ciornei1-8/+6
Request all interrupt sources to be read and then cleared on the DPSW object. In the next patches we'll also add support for treating other interrupts. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03net: fec: fix MAC internal delay doesn't workJoakim Zhang1-10/+38
This patch intends to fix MAC internal delay doesn't work, due to use of_property_read_u32() incorrectly, and improve this feature a bit: 1) check the delay value if valid, only program register when it's 2000ps. 2) only enable "enet_2x_txclk" clock when require MAC internal delay. Fixes: fc539459e900 ("net: fec: add MAC internal delayed clock feature support") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20210803052424.19008-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02dpaa2-eth: make the array faf_bits static const, makes object smallerColin Ian King1-1/+1
Don't populate the array faf_bits on the stack but instead it static const. Makes the object code smaller by 175 bytes. Before: text data bss dec hex filename 9645 4552 0 14197 3775 ../freescale/dpaa2/dpaa2-eth-devlink.o After: text data bss dec hex filename 9406 4616 0 14022 36c6 ../freescale/dpaa2/dpaa2-eth-devlink.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801152209.146359-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-29dpaa2-switch: offload shared block mirror filters when binding to a portIoana Ciornei3-0/+71
When mirroring rules are added in shared filter blocks, the same mirroring rule has to be configured on all the switch ports that are part of the same block. In case a switch port joins a shared block after mirroring filters have been already added to it, then all the mirror rules should be offloaded to the port. The reverse, removal of mirroring rules, has to be done at block unbind. For this purpose, the dpaa2_switch_block_offload_mirror() and dpaa2_switch_block_unoffload_mirror() functions are added and called upon binding and unbinding a switch port to/from a block. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29dpaa2-switch: add VLAN based mirroringIoana Ciornei1-5/+138
Using the infrastructure added in the previous patch, extend tc-flower support with FLOW_ACTION_MIRRED based on VLAN. Tested with: tc qdisc add dev eth8 ingress_block 1 clsact tc filter add block 1 ingress protocol 802.1q flower skip_sw \ vlan_id 100 action mirred egress mirror dev eth6 tc filter del block 1 ingress pref 49152 Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29dpaa2-switch: add support for port mirroringIoana Ciornei3-5/+182
Add support for per port mirroring for the DPAA2 switch. We support only single mirror port, therefore we allow mirroring rules only as long as the destination port is always the same. Unlike all the actions (drop, redirect, trap) already supported by the dpaa2-switch driver, adding mirroring filters in shared blocks is not achieved by a singular ACL entry added in a table shared by the ports. This is why, when a new mirror filter is added in a block we have to got through all the switch ports sharing it and configure the filter individually on all. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29dpaa2-switch: add API for setting up mirroringIoana Ciornei3-0/+130
Add the necessary MC API for setting up and configuring the mirroring feature on the DPSW DPAA2 object. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29dpaa2-switch: reorganize dpaa2_switch_cls_matchall_replaceIoana Ciornei1-6/+25
Extract the necessary steps to offload a filter by using the ACL table in a separate function - dpaa2_switch_cls_matchall_replace_acl(). This is intended to help with the code readability when the mirroring support is added. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29dpaa2-switch: reorganize dpaa2_switch_cls_flower_replaceIoana Ciornei1-6/+26
Extract the necessary steps to offload a filter by using the ACL table in a separate function - dpaa2_switch_cls_flower_replace_acl(). This is intended to help with the code readability when the mirroring support is added. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29dpaa2-switch: rename dpaa2_switch_acl_tbl into filter_blockIoana Ciornei3-125/+130
Until now, shared filter blocks were implemented only by ACL tables shared between ports. Going forward, when the mirroring support will be added, this will not be true anymore. Rename the dpaa2_switch_acl_tbl into dpaa2_switch_filter_block so that we make it clear that the structure is used not only for filters that use the ACL table but will be used for all the filters that are added in a block. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29dpaa2-switch: rename dpaa2_switch_tc_parse_action to specify the ACLIoana Ciornei1-8/+8
Until now, the dpaa2_switch_tc_parse_action() function was used for all the supported tc actions since all of them were implemented by adding ACL table entries. In the next commits, the dpaa2-switch driver will gain mirroring support which is not using the same HW feature. Make sure that we specify the ACL in the function name so that we make it clear that it's only used for specific actions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add MAC internal delayed clock feature supportFugang Duan2-0/+33
i.MX8QM ENET IP version support timing specification that MAC integrate clock delay in RGMII mode, the delayed TXC/RXC as an alternative option to work well with various PHYs. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add eee mode tx lpi supportFugang Duan2-0/+95
The i.MX8MQ ENET version support IEEE802.3az eee mode, add eee mode tx lpi enable to support ethtool interface. usage: 1. set sleep and wake timer to 5ms: ethtool --set-eee eth0 eee on tx-lpi on tx-timer 5000 2. check the eee mode: ~# ethtool --show-eee eth0 EEE Settings for eth0: EEE status: enabled - active Tx LPI: 5000 (us) Supported EEE link modes: 100baseT/Full 1000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full Link partner advertised EEE link modes: 100baseT/Full Note: For realtime case and IEEE1588 ptp case, it should disable EEE mode. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.