aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/hisilicon/hns3/hns3pf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky1-13/+1
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-8/+15
No conflicts! Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14net: hns3: PF support get multicast MAC address space assigned by firmwareGuangbin Huang4-7/+36
The new firmware supports to divides the whole multicast MAC address space equally to functions of all PFs, and calculates the space size of each PF according to its function number. To support this feature, PF driver adds querying multicast MAC address space size from firmware and limits used number according to space size. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net: hns3: PF support get unicast MAC address space assigned by firmwareGuangbin Huang2-4/+11
Currently, there are two ways for PF to set the unicast MAC address space size: specified by config parameters in firmware or set to default value. That's mean if the config parameters in firmware is zero, driver will divide the whole unicast MAC address space equally to 8 PFs. However, in this case, the unicast MAC address space will be wasted a lot when the hardware actually has less then 8 PFs. And in the other hand, if one PF has much more VFs than other PFs, then each function of this PF will has much less address space than other PFs. In order to ameliorate the above two situations, introduce the third way of unicast MAC address space assignment: firmware divides the whole unicast MAC address space equally to functions of all PFs, and calculates the space size of each PF according to its function number. PF queries the space size by the querying device specification command when in initialization process. The third way assignment is lower priority than specified by config parameters, only if the config parameters is zero can be used, and if firmware does not support the third way assignment, then driver still divides the whole unicast MAC address space equally to 8 PFs. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: fix the exception when query imp infoJiaran Zhang1-0/+4
When the command for querying imp info is issued to the firmware, if the firmware does not support the command, the returned value of bd num is 0. Add protection mechanism before alloc memory to prevent apply for 0-length memory. Fixes: 0b198b0d80ea ("net: hns3: refactor dump m7 info of debugfs") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: disable mac in flr processYufeng Mo1-2/+3
The firmware will not disable mac in flr process. Therefore, the driver needs to proactively disable mac during flr, which is the same as the function reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: change affinity_mask to numa node rangeYufeng Mo1-6/+8
Currently, affinity_mask is set to a single cpu. As a result, irqbalance becomes invalid in SUBSET or EXACT mode. To solve this problem, change affinity_mask to numa node range. In this way, irqbalance can be performed on the cpu of the numa node. Fixes: 0812545487ec ("net: hns3: add interrupt affinity support for misc interrupt") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 staticchongjiapeng1-1/+1
This symbols is not used outside of hclge_cmd.c and hclgevf_cmd.c, so marks it static. Fix the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c:345:35: warning: symbol 'hclgevf_cmd_caps_bit_map0' was not declared. Should it be static? drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:365:33: warning: symbol 'hclge_cmd_caps_bit_map0' was not declared. Should it be static? Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: remove unnecessary spacesHao Chen1-1/+1
This patch removes some unnecessary spaces for cleanup. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: add some required spacesHao Chen1-11/+11
Add some required spaces to improve readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: clean up a type mismatch warningGuojia Liao1-1/+8
abs() returns signed long, which could not convert the type as unsigned, and it may cause a mismatch type warning from static tools. To fix it, this patch uses an variable to save the abs()'s result and does a explicit conversion. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: uniform parameter name of hclge_ptp_clean_tx_hwts()Hao Chen1-1/+1
The parameter name of hclge_ptp_clean_tx_hwts() in declaration is "dev", but the definition of this function is used the common name "hdev" as other functions, so modify it. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: refine function hclge_dbg_dump_tm_pri()Guangbin Huang1-28/+42
To improve flexibility, simplicity and maintainability to dump info of every element of tm priority, add a struct hclge_dbg_item array of tm priority and fill string of every data according to this array. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hclge_ets_validate()Guangbin Huang1-12/+35
This patch reconstructs function hclge_ets_validate() to reduce the code cycle complexity and make code more concise. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: initialize each member of structure array on a separate lineJiaran Zhang1-549/+1116
To make the format of each member initialization of structure array clearer, initialize each member on a separate line. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: add required space in commentHao Chen2-2/+2
Add some required spaces in comment for cleanup. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: don't config TM DWRR twice when set ETSGuangbin Huang1-3/+1
The function hclge_tm_dwrr_cfg() will be called twice in function hclge_ieee_setets() when map_changed is true, the calling flow is hclge_ieee_setets() hclge_map_update() | hclge_tm_schd_setup_hw() | hclge_tm_dwrr_cfg() hclge_notify_init_up() hclge_tm_dwrr_cfg() It is no need to call hclge_tm_dwrr_cfg() twice actually, so just return after calling hclge_notify_init_up(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: add new function hclge_get_speed_bit()Guangbin Huang2-31/+35
Currently, function hclge_check_port_speed() uses switch/case statement to get speed bit according to speed. To reuse this part of code and improve code readability and maintainability, add a new function hclge_get_speed_bit() to get speed bit according to map relationship of speed and speed bit defined in array speed_bit_map. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: refactor function hclge_parse_capability()Guangbin Huang2-29/+28
The function hclge_parse_capability() uses too many if statement, and it may add more in the future. To improve code readability, maintainability and simplicity, refactor this function by using a bit mapping array of IMP capabilities and driver capabilities. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28net: hns3: add trace event in hclge_gen_resp_to_vf()Yufeng Mo1-0/+2
Add a trace to get the info of pf responds to the mailbox message of vf. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: merge some repetitive macrosPeng Li3-32/+22
There are some repetitive macros have same meaning and value, this patch merges them to make code clean. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: add macros for mac speeds of firmware commandGuangbin Huang2-18/+31
To improve code readability, replace digital numbers of mac speeds defined by firmware command with macros. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-19/+57
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: fix get wrong pfc_en when query PFC configurationGuangbin Huang1-11/+2
Currently, when query PFC configuration by dcbtool, driver will return PFC enable status based on TC. As all priorities are mapped to TC0 by default, if TC0 is enabled, then all priorities mapped to TC0 will be shown as enabled status when query PFC setting, even though some priorities have never been set. for example: $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off $ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on To fix this problem, just returns user's PFC config parameter saved in driver. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: fix GRO configuration error after resetYufeng Mo2-5/+14
The GRO configuration is enabled by default after reset. This is incorrect and should be restored to the user-configured value. So this restoration is added during reset initialization. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: fix duplicate node in VLAN listGuojia Liao1-1/+5
VLAN list should not be added duplicate VLAN node, otherwise it would cause "add failed" when restore VLAN from VLAN list, so this patch adds VLAN ID check before adding node into VLAN list. Fixes: c6075b193462 ("net: hns3: Record VF vlan tables") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: fix speed unknown issue in bond 4Yonglong Liu1-1/+1
In bond 4, when the link goes down and up repeatedly, the bond may get an unknown speed, and then this port can not work. The driver notify netif_carrier_on() before update the link state, when the bond receive carrier on, will query the speed of the port, if the query operation happens before updating the link state, will get an unknown speed. So need to notify netif_carrier_on() after update the link state. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: add waiting time before cmdq memory is releasedYufeng Mo2-1/+6
After the cmdq registers are cleared, the firmware may take time to clear out possible left over commands in the cmdq. Driver must release cmdq memory only after firmware has completed processing of left over commands. Fixes: 232d0d55fca6 ("net: hns3: uninitialize command queue while unloading PF driver") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: clear hardware resource when loading driverYufeng Mo2-0/+29
If a PF is bonded to a virtual machine and the virtual machine exits unexpectedly, some hardware resource cannot be cleared. In this case, loading driver may cause exceptions. Therefore, the hardware resource needs to be cleared when the driver is loaded. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24net: hns3: add support for EQE/CQE mode configurationYufeng Mo1-0/+1
For device whose version is above V3(include V3), the GL can select EQE or CQE mode, so adds support for it. In CQE mode, the coalesced timer will restart when the first new completion occurs, while in EQE mode, the timer will not restart. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19net: hns3: make array spec_opcode static const, makes object smallerColin Ian King1-11/+13
Don't populate the array spec_opcode on the stack but instead it static const. Makes the object code smaller by 158 bytes: Before: text data bss dec hex filename 12271 3976 128 16375 3ff7 .../hisilicon/hns3/hns3pf/hclge_cmd.o After: text data bss dec hex filename 12017 4072 128 16217 3f59 .../hisilicon/hns3/hns3pf/hclge_cmd.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16net: hns3: add support ethtool extended link stateGuangbin Huang2-0/+27
In order to know the reason of link up failure, add supporting ethtool extended link state. Driver reads the link status code from firmware if in link down state and converts it to ethtool extended link state. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-14net: hns3: remove always exist devlink pointer checkLeon Romanovsky1-7/+1
The devlink pointer always exists after hclge_devlink_init() succeed. Remove that check together with NULL setting after release and ensure that devlink_register is last command prior to call to devlink_reload_enable(). Fixes: b741269b2759 ("net: hns3: add support for registering devlink for PF") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11net: hns3: add support for triggering reset by ethtoolYufeng Mo2-0/+7
Currently, four reset types are supported for the HNS3 ethernet driver: IMP reset, global reset, function reset, and FLR. Only FLR can now be triggered by the user. To restore the device when an exception occurs, add support for triggering reset by ethtool. Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to trigger the IMP | global | function reset manually. In addition, VF can only trigger function reset. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky1-2/+2
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-9/+37
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27net: hns3: change the method of obtaining default ptp cycleYufeng Mo2-9/+37
The ptp cycle is related to the hardware, so it may cause compatibility issues if a fixed value is used in driver. Therefore, the method of obtaining this value is changed to read from the register rather than use a fixed value in driver. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-26net: hns3: add devlink reload support for PFHao Chen1-0/+70
Add devlink reload support for HNS3 ethernet PF driver. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-26net: hns3: add support for devlink get info for PFYufeng Mo1-0/+30
Add devlink get info support for HNS3 ethernet PF driver. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-26net: hns3: add support for registering devlink for PFYufeng Mo5-2/+81
Add devlink register support for HNS3 ethernet PF driver. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: hns3: disable port VLAN filter when support function level VLAN filter controlJian Shen1-2/+6
For hardware limitation, port VLAN filter is port level, and effective for all the functions of the port. So if not support port VLAN bypass, it's necessary to disable the port VLAN filter, in order to support function level VLAN filter control. Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net: hns3: fix possible mismatches resp of mailboxChengwen Feng1-0/+1
Currently, the mailbox synchronous communication between VF and PF use the following fields to maintain communication: 1. Origin_mbx_msg which was combined by message code and subcode, used to match request and response. 2. Received_resp which means whether received response. There may possible mismatches of the following situation: 1. VF sends message A with code=1 subcode=1. 2. PF was blocked about 500ms when processing the message A. 3. VF will detect message A timeout because it can't get the response within 500ms. 4. VF sends message B with code=1 subcode=1 which equal message A. 5. PF processes the first message A and send the response message to VF. 6. VF will identify the response matched the message B because the code/subcode is the same. This will lead to mismatch of request and response. To fix the above bug, we use the following scheme: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. As for PF driver, it only needs to copy the match_id from request to response. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Chengwen Feng <fengchengwen@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-28net: hns3: add support for dumping MAC umv counter in debugfsJian Shen1-0/+34
This patch adds support of dumping MAC umv counter in debugfs, which will be helpful for debugging. The display style is below: $ cat umv_info num_alloc_vport : 2 max_umv_size : 256 wanted_umv_size : 256 priv_umv_size : 85 share_umv_size : 86 vport(0) used_umv_num : 1 vport(1) used_umv_num : 1 Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: hns3: add support for FD counter in debugfsJian Shen3-2/+54
Previously, the flow director counter is not enabled. To improve the maintainability for chechking whether flow director hit or not, enable flow director counter for each function, and add debugfs query inerface to query the counters for each function. The debugfs command is below: cat fd_counter func_id hit_times pf 0 vf0 0 vf1 0 Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: hns3: Fix a memory leak in an error handling path in 'hclge_handle_error_info_log()'Christophe JAILLET1-2/+4
If this 'kzalloc()' fails we must free some resources as in all the other error handling paths of this function. Fixes: 2e2deee7618b ("net: hns3: add the RAS compatibility adaptation solution") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: hns3: fix a double shift bugDan Carpenter1-3/+3
These flags are used to set and test bits like this: if (!test_bit(HCLGE_PTP_FLAG_TX_EN, &ptp->flags) || The issue is that test_bit() takes a bit number like 1, but we are passing BIT(1) instead and it's testing BIT(BIT(1)). This does not cause a problem because it is always done consistently and the bit values are very small. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: hns3: fix different snprintf() limitDan Carpenter1-3/+1
This patch doesn't affect runtime at all, it's just a correctness issue. The ptp->info.name[] buffer has 16 characters but the snprintf() limit was capped at 32 characters. Fortunately, HCLGE_DRIVER_NAME is "hclge" which isn't close to 16 characters so we're fine. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: add support to query tx spare buffer size for pfHuazhong Tan3-0/+18
Add support to query tx spare buffer size from configuration file, and use this info to do spare buffer initialization when the module parameter 'tx_spare_buf_size' is not specified. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: hns3: add debugfs support for ptp infoHuazhong Tan1-0/+55
Add a debugfs interface for dumping ptp information, which is helpful for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: hns3: add support for PTPHuazhong Tan6-4/+747
Adds PTP support for HNS3 ethernet driver. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.